Interior Acoustic Simulation for In-Car Audio Design (original) (raw)
Related papers
ACOUSTIC DIAGNOSTIC ANALYSIS OF AUTOMOBILE PASSENGER COMPARTMENTS
The automobile industry has long been fiercely competitive, with different vendors attempting to produce vehicles with Ix3ter performance, handling and fuel efficiency. Now the industry is seeing the competition taking place in automobile acoustics, and a quiet ride has become an important attribute of modem vehicles. In order to assess the noise levels inside a car, it is possible to analyze the acoustic field using a computer based model. Most recently this has been done predominantly using the Boundary Element Method (BEM). This predicts the acoustic pressures and sound intensities, etc. given a set of boundary conditions which describe the velocity of the body panels and the sound absorbency of the materials covering those panels. A BEM analysis can be extended by performing an 'acoustic diagnostic analysis'. This considers the noise at any point (e.g. the driver's right ear), and breaks it down into the contributions from the individual body panels. Thus engineers c...
2010
Referencing earlier work by the authors on the boundary effects in an automotive vehicle interior [1] on the mid-tohigh frequency timbral changes in the sound field due to the proximity to loudspeakers of reflective, semi-rigid surfaces, modeling of midsize loudspeakers in the interior of an vehicle is reported on, as well as modeled results for a specific case are given. 8023 Shively, et al Opt. Loc. & BFX for Loudspeakrs in Auto Interior AES 128th Convention, London, UK, 2010 May 22–25 Page 2 of 12
Analysis of Acoustic Characteristics of a Car Cabin Using Computer-Aided Engineering
Applied Mechanics and Materials, 2012
A computer-aided engineering (CAE) model was developed to analyze the acoustic characteristics of a car cabin. Pro/Engineer Wildfire 4.0 was usedto three-dimensionally represent the geometry of the cabin. The CAE, using COMSOL Multiphysics 4.2a, was performed to investigate the distribution of sound pressure fieldsat natural frequencies. The principlemode indices were (), corresponding to the modal coefficients 1, 2, 3, and 4 and the natural frequencies of 179. 691, 139.276, 221.620, and 231.386 Hz, respectively.The results of the analysisprovided insight into the car cabin design to suppress exterior and interior noise.
Proceedings of the 33rd Internatinal Congress and Exposition on Noise Control Engineering (Inter-Noise 2004), Prague, Czech Republic., 2004
ABSTRACT: The present paper describes the results of finite element analysis of structural vibration modes, interior acoustic modes, and structural-acoustic modes in some simplified models of road vehicles having different levels of complexity, in particular in the QUArter-Scale Interior Cavity Acoustic Rig (QUASICAR) developed in Loughborough University. All the analysis has been carried out using the original code that had been developed in Patran Command Language (PCL) specifically for the purpose of this research. Resonant frequencies and spatial distributions of structural and acoustic modes have been calculated initially separately and then taking into account structuralacoustic interaction. The results have been compared with the experimental data obtained for QUASICAR. The comparison has demonstrated good agreement between numerical calculations and experimental results. The developed approach is reliable and efficient, and it can be extended to more complex vehicle models, thus assisting in better understanding of vehicle interior noise.
Acoustic-Structural Coupling of the Automobile Passenger Compartment
Proceedings of the World Congress on Engineering, 2007
AbstractRenewed interest in reducing interior noise in transportation vehicles has motivated research in low frequency, structural-acoustic analysis. The internal sound field in the enclosed cavity is significantly affected by the acoustic modal characteristics of the ...
Use of Sound "PHONONS' in the modelling and Optimisation of automotive acoustic systems in 3D
NOISE-CON ... proceedings, 2022
Automotive manufacturers demand components with an ever higher acoustic performance combined with lower environmental impact, tuned to the emerging EV market, and are pressured into reducing lead times and prototype investment. Consequently, there is a desire for enhanced simulation techniques, utilizing advanced methods. The three-dimensional aspect of many palliative treatments can be shown to afford significant benefits to their acoustic performance, both in their transmission loss and random incidence absorption characteristics. Virtual system engineering enables construction fundamentals to be created in CAD, but often acoustic treatments are chosen based on flat sample performance or simple power balance models. These do not tell the complete story. Current acoustic simulation techniques such as SEA, may present the model in a 3D environment to aid in visualization but, solving is done on a 2D matrix basis, and does not account easily for diffusion and refractive interaction caused by the complex shape of the component under investigation. BEM and FEM techniques are 3D based simulations but have a host of limitations due to mesh density and available processing power. Constructing models of individual palliatives such as wheel arch liners, dash insulations or carpets using such techniques may be of academic interest but of restricted use in the pressured world of component design and manufacture. It is not helped by the need to furnish the model with accurate, validated, material performance data. A modelling procedure was required that could import component CAD from the product design team and rapidly create an acoustic model that could accurately predict its performance in both a transmission loss suite and associated random incidence "Alpha cabin" absorption test. Thus, short circuit the need for at least one if not more prototype test phases or enable quotations for new business to be formulated with a higher degree of clarity. Subsequently to export results from this model into a range of "full vehicle" modelling environments or compare to prototype test results. After considerable research the authors created and validated a toolbox approach using a combination of open-source code together with bespoke modifications and defined processing procedures.
Boundary Element Method In TheDevelopment Of Vehicle Body StructuresFor Better Interior Acoustics
1970
In this paper, Boundary Element Method (BEM) is exploited for the numerical solution of interior acoustics problems governed by the Helmholtz's equation. A detailed literature survey on the application of the BEM to the radiation problems concerning the interior regions is presented. A formulation directed to the particular application of noise generation inside motor vehicle passenger compartments is developed. The solution of the problem is illustrated, in detail, on a classical acoustic problem, i.e. the acoustic response of a spherical cavity. The sound pressure variation along the radius is examined as a function of the dimensionless frequency number. The effect of an opening on the surface of the body is also examined.
Vibro-Acoustic Analysis of a Heavy Duty Truck Cabin
Volume 2: Dynamics, Vibration and Control; Energy; Fluids Engineering; Micro and Nano Manufacturing, 2014
Automotive manufacturers invest a lot of effort and money to enhance the vibro-acoustic performance of their products. In a complex dynamic system such as a truck cabin, the enhancement effort may be very difficult and time-consuming if only the 'trial and error' method is used without prior knowledge about the noise contributors.