Thermal radiation analysis of DEMO tokamak (original) (raw)
Related papers
Preliminary conceptual design of a medium sized tokamak (IST-1)
Indian Journal of Physics, 2015
In this paper an attempt is made to estimate the main parameters of the Iranian superconducting tokamak as a medium sized tokamak. In the first stage, the production and confinement of ohmically heated plasma is considered. Considering the aim of the design and the kink stability limit, three main parameters are assumed to be known. Using the known theoretical, empirical scale laws and numerical solution of Grad-Shafranov equation for a D-shaped plasmas and also considering the correction terms due to triangularity of the torus cross section, other physical and geometrical parameters have been estimated. The magnetic flux surfaces, plasma pressure and toroidal current density profiles are found by solving of Grad-Shafranov equation as an eigenvalue problem using finite element method. The preliminary results are compared with some recent tokamaks now in operation in different research centers.
Cryogenic requirements for the JT-60SA Tokamak
2012
The superconducting tokamak JT-60SA is part of the Broader Approach Programme agreed between Japan and Europe. CEA is in charge of the cryogenic system procurement including the Warm Compression Station, the gas storages, the Refrigerator Cold Box and the Auxiliary Cold Box (ACB) which has to be installed on the JAEA Naka site in 2016. This paper summarizes the updated cryogenic requirements for the tokamak JT-60SA cryogenic system. The cryogenic system has a refrigeration capacity of about 9 kW equivalent at 4.5K, to supply cryopump panels at 3.7 K, superconducting magnets and cold structures at 4.4 K, HTS current leads at 50 K, and thermal shields at 80 K. This paper presents the static and variable heat loads of the different cooling loops and the results of thermohydraulic calculations to derive the transient heat loads at the interface between the magnet system cooling loops and the Auxiliary Cold Box.
Fusion Engineering and Design, 2004
Thermal analysis is a prime consideration in the design of plasma facing components (PFC) cooling during plasma operation in a Tokamak device. The task is greatly simplified by using computer-based numerical techniques. Finite difference method (FDM) and finite element method (FEM) are the two methods generally being used for thermal analysis. FEM is gaining wide acceptance for such problems because it performs all the necessary computations in the computer. FDM, in contrast, requires significant amounts of data to be calculated for input into the computer program. This can provide accurate thermal analysis in less time and less computer memory than FEM. An efficient finite difference (FD) code has been developed to derive the two-dimensional temperature profile in different PFC modules subjected to steady-state condition. The details of the code and comparison of its results with finite element (FE) analysis are presented in this paper.
Conceptual design of the tokamak radiation shielding for the Tokamak Physics Experiment (TPX)
15th IEEE/NPSS Symposium. Fusion Engineering
The tokamak radiation shielding includes the neutron and The tokamak shielding must be suffi,.-ient to limit gamma shielding around the torus and penetrations required neutron activation of ex-vessel components _Io levels that to (1) limit activation of components outside the shield to allow hands-on maintenance of these components. The levels that permit hands-on maintenance and (2) limit the total expected fluence is 4 x 1022 deuterium-deuterium nuclear heating of the superconducting coils and cold structure. The primary design drivers are space, the 350"C (D-D) neutrons and 8 x 1020 deuterium-t_um (D-T) bakeout temperature, and cost; therefore, different shield neutrons [1]. materials were used for different shield components and The shielding must also be sufficient to limit the iocatiom. The shielding is divided into three areas: (1) torus maximum integrated heat load into the superconducting shielding around the vacuum vessel, (2) duct shielding around coils and cold structure during deuterium operation to < 5 the vacuum pumping ducts and vertical diagnostic ducts, and kW. The peak initial neutron source rate during deuterium O) penetration shielding in and around the radial ports. The operation is 5 x 1016 D-D neutrons/s and 1 x 1015 D-T major shield components include water between the walls of neutrons/s. The shielding system must be capable of the vacuum vessel, lead monosilicate/boron carbide tiles that continuous operation at 150°C and withstand bakeout of the are attached to the exterior of the vacuum vessel, shield plugs vacuum vessel at 350°C for indefinite periods. that fill the openings of the large radial ports, and polyethylene/lead/boron shield blocks for duct shielding. A description of the shielding configuration and the performance CONFIGURATION REQUIREMENTS AND ESSENTIAL FEATURES and operational requirements will be discussed. *Research sponsored by the Office of Fusion Energy, U.S. equivalent to at least 20 cm of water, the equivalent of at Department of Energy, under Contract No. DE-AC05-least 1 cm of boron carbide, and the equivalent of at least 2 84OR21400 with Martin MariettaEnergy Systems, Inc, cm of elemental lead. The penetration shi$1ding must LllS"111161JTlONi_lblll_l_,_iT I,_ UI_LII'dlTI_III
Nuclear Shield Design of a High Beta Ignited Tokamak Experiment
Fusion Technology, 1985
A unique nuclear shield design for a high beta ignited tokamak has been completed. Maximum advantage is taken of the shielding properties of the vacuum vessel and coil structures with the remaining space being filled with bulk shielding. The basic unit is an aluminum-bronze casting with integrally cast stainless steel coolant tubes. Each module is fitted for the particular zone around the vessel. The modules are sized to minimize the decay time of induced eddy currents and, for this reason, are insulated from one another. Lifting holes are castin as are offsets and alignment pins. Using vertical lifts, this permits easy removal for access to components buried in the shielded zones.
Measurement and analysis of the radiation losses in DAMAVAND Tokamak
Journal of Physics: Conference Series, 2014
Radiation losses play an important role on reaching to break-even conditions in Tokamaks. In this paper the results of measurement by a bolometer in Damavand Tokamak have been presented & analyzed. Meanwhile, we have explained our future research program on the base of last modifications in the control system of the DAMAVAND.
Design and construction of the KSTAR tokamak
Nuclear Fusion, 2001
The extensive design effort for KSTAR has been focused on two major aspects of the KSTAR project mission -steady-state-operation capability and advanced tokamak physics. The steady state aspect of the mission is reflected in the choice of superconducting magnets, provision of actively cooled in-vessel components, and long pulse current drive and heating systems. The advanced tokamak aspect of the mission is incorporated in the design features associated with flexible plasma shaping, double null divertor and passive stabilizers, internal control coils and a comprehensive set of diagnostics. Substantial progress in engineering has been made on superconducting magnets, the vacuum vessel, plasma facing components and power supplies. The new KSTAR experimental facility with cryogenic system and deionized water cooling and main power systems has been designed, and the construction work is under way for completion in 2004.
Study of heat flux deposition on the limiter of the Tore Supra tokamak
Journal of Nuclear Materials, 2009
On the limiter of Tore Supra, the heat loads map computed from deconvolution of IR surface temperatures shows good agreement with calorimetry measurements. This experimental heat pattern allows deducing the heat fluxes in the scrape-off layer using a 3D magnetic calculation and assuming only parallel heat transport along field lines. This calculation leads to an underestimation of the power circulating in the edge plasma according to the power balance, similarly to RFA measurements. The comparison between experimental heat loads on the limiter and modelling also shows a spreading of heat fluxes near the LCFS that cannot be explained only by parallel transport in the SOL.
Analysis of Materials for Heat Transport in Tokamaks
World Journal of Nuclear Science and Technology, 2020
Every nuclear power reactor, whether of fusion or fission, is essentially a thermal system that generates electricity. In this sense, there are several problems in relation to this heat transport. The model of plasma confinement by magnetic force, in the nuclear fusion (sterellator and tokamak), has only been 20 years and recently some success in the quality of the generated plasma has been achieved. However, due to the large amount of energy coming from the plasma, the choice of the material that will carry the generated energy is quite troublesome, due to the need to handle a very high temperature for the nuclear fission standards. Solutions are explored by the scientific community to transport the energy generated in the case of the primary circuit, after exceeding breakeven temperature and models that are based on the fission reactors of the fourth generation and those currently in operation, to search for solutions regarding the transport of heat generated for the generation of electric energy. Several materials such as pressurized water, sodium, helium and boron have been considered and studied to form the primary heat transfer circuit for the exchanger. A thorough analysis of these materials is necessary. This research looked at some of these materials for heat transport and power generation. Lithium and helium were found to be the probable materials for conveying heat and cooling in the blanket. The results show that research on blanket materials needs more attention. The quality of these materials needs to be improved by material research, with the ODS EUROFER alloy and other research to reduce material erosion by helium nano bubbles. Plasma quality needs to be improved to keep constant and free of impurities when using lithium in liquid form.
Plasma Design Considerations of Near Term Tokamak Fusion Experimental Reactor
Journal of Nuclear Science and Technology, 1982
Wide range of parameter surveys are made on the DT fusion tokamak experimental reactor next to JT-60. Various physics and engineering requirements are taken into account, e. g. self-ignition, available maximum toroidal fJ value, a-particle confinement, total fusion power, neutron wall loading, heat flux to divertor plate, structural restriction on major radius, device size, maximum toroidal magnetic field, poloidal field power supply and so on. Theoretical scaling law for the available maximum toroidal fJ value determined by ballooning mode instability is used. The toroidal magnetic field on plasma axis can be expressed by the aspect ratio A for a given maximum field at the toroidal field coil conductor. Empirical scaling law for the electron energy confinement and neoclassical heat conductivity for the ion are employed. These confinement times can be expressed by the plasma minor radius a and A through the maximum available fJ value and the toroidal field on axis. In the similar way, most of the physics and engineering requirements can be mapped on the a-A diagram. This diagram enables us to make systematic and wide range of parameter surveys of the device. In particular, this offers a clear perspective on the device parameters, which can mitigate the engineering difficulties and can also realize the required plasma performances.