Influence of Micron-Ti and Nano-Cu Additions on the Microstructure and Mechanical Properties of Pure Magnesium
Sankaranarayanan Seetharaman
Metals, 2012
View PDFchevron_right
Development of Mg-Alloy by Powder Metallurgy Method and Its Characterization
pardeep sharma
Powder Metallurgy and Metal Ceramics, 2019
View PDFchevron_right
Effect of iron particulates addition on the microstructural and mechanical properties of pure magnesium
Sankaranarayanan Seetharaman
View PDFchevron_right
Effect of Ca and Zn additions on the mechanical properties of Mg produced by powder metallurgy
feray guleryuz
AIP Conference Proceedings, 2017
View PDFchevron_right
Improving the Mechanical Properties of Mg-5.6 Ti-3Al Composite through Nano-Al2O3 Addition with Recrystallisation Heat Treatment
Jayalakshmi Subramanian
View PDFchevron_right
MICROSTRUCTURE AND MECHANICAL PROPERTIES OF HOT EXTRUDED Mg- 3Zn-1Cu-0.7Mn ALLOY PRODUCED BY POWDER METALLURGY
TJPRC Publication
View PDFchevron_right
Microstructure and mechanical properties of extruded profiles made from pure magnesium powders
Naďa Beronská
Kovové materiály, 2020
View PDFchevron_right
Enhancing the ductility of Mg-(5.6Ti+3Al) composite using nano-B4C addition and heat treatment
Sankaranarayanan Seetharaman
View PDFchevron_right
Achieving High Yield Strength and Ductility in As-Extruded Mg-0.5Sr Alloy by High Mn–Alloying
Shibo Zhou
Materials
View PDFchevron_right
Development of high performance Mg–Al2O3composites containing Al2O3in submicron length scale using microwave assisted rapid sintering
Manoj Gupta
Materials Science and Technology, 2005
View PDFchevron_right
Reinforcing Low-Volume Fraction Nano-TiN Particulates to Monolithical, Pure Mg for Enhanced Tensile and Compressive Response
Abdulhakim Almajid
Materials, 2016
View PDFchevron_right
Enhancing the Hardness and Compressive Response of Magnesium Using Complex Composition Alloy Reinforcement
Sandar Tun
Metals, 2018
View PDFchevron_right
Development of high performance magnesium composites using Ni50Ti50 metallic glass reinforcement and microwave sintering approach
HEMANTH SHANKAR
Journal of Alloys and Compounds, 2015
View PDFchevron_right
Processing, microstructure and mechanical characterization of a new magnesium based multicomponent alloy
Vincent Shantha Kumar
View PDFchevron_right
Synthesis and characterization of new titanium containing magnesium materials
Sankaranarayanan Seetharaman
2014
View PDFchevron_right
Effect of extrusion ratio on microstructure and mechanical properties of microwave-sintered magnesium and Mg/Y2O3 nanocomposite
Manoj Gupta
Journal of Materials Science, 2008
View PDFchevron_right
Effect of Alumina (Al2O3) Particles on The Mechanical Properties of Magnesium (Mg)
Hala Salman Hasan
Al-Nahrain Journal for Engineering Sciences, 2019
View PDFchevron_right
Improving the mechanical properties of Mg-5.6Ti-3Al composite through nano-Al2O3 addition with recrystallization heat treatment
Sankaranarayanan Seetharaman
View PDFchevron_right
Design considerations for achieving simultaneously high-strength and highly ductile magnesium alloys
Peter Uggowitzer
Philosophical Magazine Letters, 2012
View PDFchevron_right
Enhancing strength and ductility of Mg–12Gd–3Y–0.5 Zr alloy by forming a bi-ultrafine microstructure
Huajie Yang
Materials Science and …, 2011
View PDFchevron_right
A Review on Mechanical Properties of Magnesium Based Nano Composites
Er. Dr. Nilanjan Tarafder, lakshmi VARAPRASAD
AIP Conference Proceedings, 2018
View PDFchevron_right
Development of magnesium/(yttria+nickel) hybrid nanocomposites using hybrid microwave sintering: Microstructure and tensile properties
Manoj Gupta
Journal of Alloys and Compounds, 2009
View PDFchevron_right
Microstructures and mechanical properties of pure magnesium bars by high ratio extrusion and its subsequent annealing treatment
Yaguang Li
View PDFchevron_right
Microstructure and mechanical properties of Mg–8Li–(0–3)Ce alloys
TIANZI WANG
Journal of Materials Science, 2009
View PDFchevron_right
Microstructure–Mechanical Properties and Application of Magnesium Alloys
Sangbong Yi
Metals, 2021
View PDFchevron_right
Synthesis and Characterization of Mg-In alloys (17.47% at. and 38.84% at.) Prepared by mechanical alloying
Ney Luiggi
2020
View PDFchevron_right
AN EFFECT OF STRESS RELIEVING ON THE MICROSTRUCTURAL AND MECHANICAL PROPERTIES OF Mg-3Zn-1Cu-0.7Mn/ Al 2 O 3 COMPOSITE SYNTHESIZED BY POWDER METALLURGY
TJPRC Publication
Transstellar Journals, 2019
View PDFchevron_right
Microstructural evolution during mechanical alloying of Mg and Ni
Enrique Lavernia, Hans Fecht
Journal of Alloys and Compounds, 2005
View PDFchevron_right
Properties of Sintered Mg Alloys for Biomedical Applications
Martin Wolff
Materials Science Forum, 2011
View PDFchevron_right
Effect of Grain Size and Structure, Solid Solution Elements, Precipitates and Twinning on Nanohardness of Mg-RE Alloys
Norbert Hort
Materials Science Forum, 2013
View PDFchevron_right
Investigation of the effect of magnesium micro-addition on the structure and mechanical properties of tin-bronze (Cu-10%Sn) alloy
Cynthia C . Nwaeju
International Journal of Advanced Scientific Research, 2017
View PDFchevron_right