Computations of Boiling Flows (original) (raw)
Related papers
Boiling heat transfer modelling: A review and future prospectus
Thermal Science
This paper reviews the current status of boiling heat transfer modelling, discusses the need for its improvement due to unresolved intriguing experimental findings and emergence of novel technical applications and outlines the directions for an advanced modelling approach. The state-of-the-art of computational boiling heat transfer studies is given for: macro-scale boiling models applied in two-fluid liquid-vapour interpenetrating media approach, micro-, meso-scale boiling computations by interface capturing methods, and nano-scale boiling simulations by molecular dynamics tools. Advantages, limitations and shortcomings of each approach, which originate from its grounding formulations, are discussed and illustrated on results obtained by the boiling model developed in our research group. Based on these issues, we stress the importance of adaptation of a multi-scale approach for development of an advanced boiling predictive methodology. A general road-map is outlined for achieving th...
Developed boiling heat transfer : physical models, correlations and lines of further research
2007
A keynote lecture discusses current status of research of developed boiling heat transfer. An analysis of the main experimental facts, physical models and correlations of experimental data on heat transfer coefficient (HTC) is carried out. Exclusive character of developed boiling heat transfer law resulted by control of HTC by thermodynamic conditions on nucleation sites (a model of “the theatre of director” (MTD)) is highlighted. MTD-based correlation is discussed and the results of comparison with wide experimental data on HTC during developed boiling of all types of liquids (water, organic liquids, refrigerants, cryogenic liquids, liquid metals) are presented (without dividing of liquids into groups and without matching different constants and powers to different surface-fluid combinations). Unified interpretation of developed boiling heat transfer mode and diverse specific boiling heat transfer regimes (including boiling heat transfer hysteresis) is offered based on MTD and mult...
Physics based boiling simulation
2006
In order to animate complex fluid motion, computer animators have to rely on simulation systems that automatically generate the dynamics in a physics-based manner. We focus in this paper on the phenomenon of boiling, which, due to its complex formulation and physics, has seen very little work done in the graphics field. We propose a new Eulerian method that couples gas and liquid with variable temperature and with a mass transfer mechanism, and we present its application to simulating boiling phenomena. Our philosophy is using physicsbased models to obtain visually rich animations that mirror their real life counterparts, including phenomena of increased circulation in the mass of liquid, roiling boil, nucleation seeding on solid boundaries.
Numerical Investigation of Boiling
Bulletin of the American Physical Society, 2012
In this work, we study different phenomena that occur during nucleate boiling. We numerically investigate boiling using two phase flow direct numerical simulation based on a level set / Ghost Fluid method. This method allows us to follow the interface and to make accurate geometric calculation as for bubble curvature. Nucleate boiling on a plate is not only a thermal issue, but also involves multiphase dynamics issues at different scales and at different stages of bubble growth. As a consequence, we divide the whole problem and investigate separately the different phenomena considering their nature and the scale at which they occur. First we analyse the boiling of a static bubble immersed in an overheated liquid. We perform numerical simulations at different Jakob numbers in the case of strong discontinuity of density through the interface. These simulations permit us to estimate the accuracy of our numerical method dealing with phase change in the context of two phase flow direct n...
A numerical study of boiling heat transfer in a turbulent liquid-vapor flow inside a heated channel is carried out for various flow conditions. The model used for the flow simulation is the Volume Of Fluid model (VOF) for liquid-vapor interface tracking coupled with a k−ε low Reynolds model to predict the effect of turbulence. Boiling and condensation phenomena are included in the model based on the general laws of phase change. The obtained results are compared with available experimental measurements in the literature, where the effect of subcooling, channel inclination and flow velocity on the vapor distribution were investigated. The computational predictions of the vapor bubble development along the heated wall are in satisfactory agreement with experimental results.
Towards the direct numerical simulation of nucleate boiling flows
International Journal of Multiphase Flow, 2014
A flow model is built to capture evaporating interfaces separating liquid and vapour. Surface tension, heat conduction, Gibbs free energy relaxation and compressibility effects are considered. The corresponding flow model is hyperbolic, conservative and in agreement with the second law of thermodynamics. Phase transition is considered through Gibbs energy relaxation, in the same mind as in . Surface tension effects are modelled following the lines of . There is thus no need to resolve the interface structure as jump conditions are inherent features of the model formulation. With the present approach, the same set of partial differential equations is solved everywhere, in pure fluids as well as in the captured diffuse interface. There is thus a unique hyperbolic flow solver that handles flow dynamics, interface motion and eventually acoustic wave dynamics. To make distinction between ''pure'' fluids and liquid-vapour mixture treatment, different sets of algebraic equations are considered in the relaxation solver. To guarantee accurate computation of the liquid and gas dynamics the preconditioned implicit scheme of is adapted to the present boiling flow model. The model and method are validated against a one-dimensional test problem having exact solution. Multidimensional computations are then shown to illustrate method capabilities.
Review of numerical studies of boiling two-phase flow in smooth tubes
2017
The rapid and continuous depletion in the available energy resources nowadays has resulted in the quest for alternative sources of energy and more energy efficient processes. This review article present a broad and critical review of past researches on flow boiling and condensation, basically to provide a comprehensive understanding of both boiling and condensation heat transfer (HT) process as they are important phenomena that find application in various areas in the thermal science field and industry which includes; power generation, refrigeration and air conditioning, nuclear reactors, chemical engineering, high-power electronics component cooling and so on. An in-depth understanding of this phenomenon will help to know how to attain very high heat transfer rates with small variations in the surface temperature. Consequentially, this results in better energy efficient process with huge reduction in system size, volume and energy consumption, hence significant fall in the heat ene...
Introduction and Mathematical Analysis to Heat Transfer by Boiling
Introduction and Mathematical Analysis to Heat Transfer by Boiling, 2024
Boiling heat transfer is a critical process in various industries, efficiently transferring heat through the phase change of a liquid to vapor. This thermal phenomenon is essential in applications ranging from power generation to chemical processing, influencing design and safety considerations. Understanding its mechanisms and factors affecting efficiency can significantly optimize energy use in heating and cooling systems. Boiling heat transfer is integral to numerous industrial and engineering processes. It underpins the efficiency and functionality of systems ranging from large-scale power plants to compact electronic devices. By harnessing the principles of boiling heat transfer, engineers can design systems that effectively manage thermal energy, leading to innovations in various sectors. In power plants, the efficiency of steam generation and thus electricity production can be significantly increased by optimizing boiling heat transfer processes.