Adaptation of a Membrane-active Peptide to Heterogeneous Environment. II. The Role of Mosaic Nature of the Membrane Surface (original) (raw)
Related papers
Simulations of a membrane-anchored peptide: structure, dynamics, and influence on bilayer properties
Biophysical journal, 2004
A three-dimensional structure of a model decapeptide is obtained by performing molecular dynamics simulations of the peptide in explicit water. Interactions between an N-myristoylated form of the folded peptide anchored to dipalmitoylphosphatidylcholine fluid phase lipid membranes are studied at different applied surface tensions by molecular dynamics simulations. The lipid membrane environment influences the conformational space explored by the peptide. The overall secondary structure of the anchored peptide is found to deviate at times from its structure in aqueous solution through reversible conformational transitions. The peptide is, despite the anchor, highly mobile at the membrane surface with the peptide motion along the bilayer normal being integrated into the collective modes of the membrane. Peptide anchoring moderately alters the lateral compressibility of the bilayer by changing the equilibrium area of the membrane. Although membrane anchoring moderately affects the elas...
Interactions of Hydrophobic Peptides with Lipid Bilayers: Monte Carlo Simulations with M2δ
Biophysical Journal, 2003
We introduce here a novel Monte Carlo simulation method for studying the interactions of hydrophobic peptides with lipid membranes. Each of the peptide's amino acids is represented as two interaction sites: one corresponding to the backbone a-carbon and the other to the side chain, with the membrane represented as a hydrophobic profile. Peptide conformations and locations in the membrane and changes in the membrane width are sampled using the Metropolis criterion, taking into account the underlying energetics. Using this method we investigate the interactions between the hydrophobic peptide M2d and a model membrane. The simulations show that starting from an extended conformation in the aqueous phase, the peptide first adsorbs onto the membrane surface, while acquiring an ordered helical structure. This is followed by formation of a helical-hairpin and insertion into the membrane. The observed path is in agreement with contemporary understanding of peptide insertion into biological membranes. Two stable orientations of membrane-associated M2d were obtained: transmembrane (TM) and surface, and the value of the water-to-membrane transfer free energy of each of them is in agreement with calculations and measurements on similar cases. M2d is most stable in the TM orientation, where it assumes a helical conformation with a tilt of 148 between the helix principal axis and the membrane normal. The peptide conformation agrees well with the experimental data; average root-mean-square deviations of 2.1 Å compared to nuclear magnetic resonance structures obtained in detergent micelles and supported lipid bilayers. The average orientation of the peptide in the membrane in the most stable configurations reported here, and in particular the value of the tilt angle, are in excellent agreement with the ones calculated using the continuum-solvent model and the ones observed in the nuclear magnetic resonance studies. This suggests that the method may be used to predict the three-dimensional structure of TM peptides.
Biophysical Journal, 2009
Cell-penetrating peptides (CPPs) have recently attracted much interest due to their apparent ability to penetrate cell membranes in an energy-independent manner. Here molecular-dynamics simulation techniques were used to study the interaction of two CPPs: penetratin and the TAT peptide with 1,2-Dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and 1,2-dioleoyl-snglycero-3-phosphocholine (DOPC) phospolipid bilayers shed light on alternative mechanisms by which these peptides might cross biological membranes. In contrast to previous simulation studies of charged peptides interacting with lipid bilayers, no spontaneous formation of transmembrane pores was observed. Instead, the simulations suggest that the peptides may enter the cell by micropinocytosis, whereby the peptides induce curvature in the membrane, ultimately leading to the formation of small vesicles within the cell that encapsulate the peptides. Specifically, multiple peptides were observed to induce large deformations in the lipid bilayer that persisted throughout the timescale of the simulations (hundreds of nanoseconds). Pore formation could be induced in simulations in which an external potential was used to pull a single penetratin or TAT peptide into the membrane. With the use of umbrella-sampling techniques, the free energy of inserting a single penetratin peptide into a DPPC bilayer was estimated to bẽ 75 kJmol À1 , which suggests that the spontaneous penetration of single peptides would require a timescale of at least seconds to minutes. This work also illustrates the extent to which the results of such simulations can depend on the initial conditions, the extent of equilibration, the size of the system, and the conditions under which the simulations are performed. The implications of this with respect to the current systems and to simulations of membrane-peptide interactions in general are discussed.
Russian Journal of Bioorganic Chemistry, 2000
A theoretical solvation model ofpeptides and proteins that mimics the heterogeneous membranewater system was proposed. Our approach is based on the combined use of atomic parameters of solvation for water and hydrocarbons, which approximates the hydrated polar groups and acyl chains of lipids, respectively. This model was tested in simulations of several peptides: a nonpolar 20-mer polyleucine, a hydrophobic peptide with terminal polar groups, and a strongly amphiphilic peptide. The conformational space of the peptides in the presence of the membrane was studied by the Monte Carlo method. Unlike a polar solvent and vacuum, the membrane-like environment was shown to stabilize the tx-helical conformation: low-energy structures have a helicity index of 100% in all cases. At the same time, the energetically most favorable orientations of the peptides relative to the membrane depend on their hydrophobic properties: nonpolar polyleucine is entirely immersed in the bilayer and the hydrophobic peptide with polar groups at the termini adopts a transbilayer orientation, whereas the amphiphilic peptide lies at the interface parallel to the membrane plane. The results of the simulations agree well with the available experimental data for these systems. In the following communications of this series, we plan to describe applications of the solvation model to membrane-bound proteins and peptides with biologically important functional activities.
PLOS ONE
Pardaxin, with a bend-helix-bend-helix structure, is a membrane-active antimicrobial peptide that its membrane activity depends on the lipid bilayer composition. Herein, all-atom molecular dynamics (MD) simulations were performed to provide further molecular insight into the interactions, structural dynamics, orientation behavior, and cationic residues snorkeling of pardaxin in the DMPC, DPPC, POPC, POPG, POPG/POPE (3:1), and POPG/ POPE (1:3) lipid bilayers. The results showed that the C-terminal helix of the peptide was maintained in all six types of the model-bilayers and pardaxin was tilted into the DMPC, DPPC, and POPG/POPE mixed bilayers more than the POPC and POPG bilayers. As well as, the structure of zwitterionic membranes was more affected by the peptide than the anionic bilayers. Taken together, the study demonstrated that the cationic residues of pardaxin snorkeled toward the interface of lipid bilayers and all phenylalanine residues of the peptide played important roles in the peptide-membrane interactions. We hope that this work will provide a better understanding of the interactions of antimicrobial peptides with the membranes.
Membrane Perturbation Induced by Interfacially Adsorbed Peptides
Biophysical Journal, 2004
The structural and energetic characteristics of the interaction between interfacially adsorbed (partially inserted) a-helical, amphipathic peptides and the lipid bilayer substrate are studied using a molecular level theory of lipid chain packing in membranes. The peptides are modeled as ''amphipathic cylinders'' characterized by a well-defined polar angle. Assuming two-dimensional nematic order of the adsorbed peptides, the membrane perturbation free energy is evaluated using a cell-like model; the peptide axes are parallel to the membrane plane. The elastic and interfacial contributions to the perturbation free energy of the ''peptide-dressed'' membrane are evaluated as a function of: the peptide penetration depth into the bilayer's hydrophobic core, the membrane thickness, the polar angle, and the lipid/peptide ratio. The structural properties calculated include the shape and extent of the distorted (stretched and bent) lipid chains surrounding the adsorbed peptide, and their orientational (C-H) bond order parameter profiles. The changes in bond order parameters attendant upon peptide adsorption are in good agreement with magnetic resonance measurements. Also consistent with experiment, our model predicts that peptide adsorption results in membrane thinning. Our calculations reveal pronounced, membrane-mediated, attractive interactions between the adsorbed peptides, suggesting a possible mechanism for lateral aggregation of membrane-bound peptides. As a special case of interest, we have also investigated completely hydrophobic peptides, for which we find a strong energetic preference for the transmembrane (inserted) orientation over the horizontal (adsorbed) orientation.
Charged peptides penetration into a membrane interface is analyzed using molecular dynamics simulation. Peptide having a single charge or two positive charges were presented to an uncharged membrane (a phosphatidyl-choline lipid, POPC) or to a negatively charged membrane (POPC plus a phosphatidyl-serine lipid, POPS). As expected equilibrium peptide penetration into the membrane interface critically depends on both the peptide and membrane charge. Penetration only occurs when the interface is negatively charged and is associated to a well defined transient change in the orientation of the dipole moment of the closest POPS polar heads emphasizing the importance of the very local electrostatic interactions when considering peptide-lipid interactions.
A Solvent Model for Simulations of Peptides in Bilayers. I. Membrane-Promoting α-Helix Formation
Biophysical Journal, 1999
We describe application of the implicit solvation model (see the first paper of this series), to Monte Carlo simulations of several peptides in bilayer-and water-mimetic environments, and in vacuum. The membrane-bound peptides chosen were transmembrane segments A and B of bacteriorhodopsin, the hydrophobic segment of surfactant lipoprotein, and magainin2. Their conformations in membrane-like media are known from the experiments. Also, molecular dynamics study of surfactant lipoprotein with different explicit solvents has been reported (Kovacs, H., A. E. Mark, J. Johansson, and W. F. van Gunsteren. 1995. J. Mol. Biol. 247:808 -822). The principal goal of this work is to compare the results obtained in the framework of our solvation model with available experimental and computational data. The findings could be summarized as follows: 1) structural and energetic properties of studied molecules strongly depend on the solvent; membrane-mimetic media significantly promote formation of ␣-helices capable of traversing the bilayer, whereas a polar environment destabilizes ␣-helical conformation via reduction of solvent-exposed surface area and packing; 2) the structures calculated in a membrane-like environment agree with the experimental ones; 3) noticeable differences in conformation of surfactant lipoprotein assessed via Monte Carlo simulation with implicit solvent (this work) and molecular dynamics in explicit solvent were observed; 4) in vacuo simulations do not correctly reproduce protein-membrane interactions, and hence should be avoided in modeling membrane proteins.
Biochimica et Biophysica Acta (BBA) - Biomembranes, 2008
Physical properties of membranes, such as fluidity, charge or curvature influence their function. Proteins and peptides can modulate those properties and conversely, the lipids can affect the activity and/or the structure of the former. Tilted peptides are short hydrophobic protein fragments characterized by an asymmetric distribution of their hydrophobic residues when helical. They were detected in viral fusion proteins and in proteins involved in different biological processes that need membrane destabilization. Those peptides and non lamellar lipids such as PE or PA appear to cooperate in the lipid destabilization process by enhancing the formation of negatively-curved domains. Such highly bent lipidic structures could favour the formation of the viral fusion pore intermediates or that of toroidal pores. Structural flexibility appears as another crucial property for the interaction of peptides with membranes. Computational analysis on another kind of lipidinteracting peptides, i.e. cell penetrating peptides (CPP) suggests that peptides being conformationally polymorphic should be more prone to traverse the bilayer. Future investigations on the structural intrinsic properties of tilted peptides and the influence of CPP on the bilayer organization using the techniques described in this chapter should help to further understand the molecular determinants of the peptide/lipid interrelationships .