High-Power CO 2 Laser System with Repetition Rate Operation for High Current Multicharged Heavy Ion Generations (original) (raw)
Related papers
Characteristics of Laser-Plasma Ion Source Based on a CO2-Laser for Heavy Ion Accelerators at ITEP
2018
The design of laser-plasma heavy ion source is described. This ions source is supposed to operate at I-3 and I-4 accelerators at ITEP. Characteristics of ion component of plasma produced by pulses of the CO2 laser were studied, when irradiating a solid carbon target at power density of 10¹¹-10¹² W/cm². Time-of-flight technique using a high-resolution electrostatic energy analyzer was applied to explore charge state and energy distribution as well as partial currents of carbon and tungsten ions. Some results of investigation of influence of cavern formation on charge state of generated ions are presented. This work is of considerable interest in a wide area of applications of accelerated particle beams, including fundamental studies of state of matter in particle colliders (NICA project at JINR), radiation damage simulation and hadron therapy for cancer treatment. The goal of this work is to investigate characteristics of ions in expanding laser plasma and find optimal conditions of ...
The “SKATE” CO 2 Gigawatt Laser for a Laser-Plasma Generator of Ions and Nuclei
Journal of Russian Laser Research, 2004
A setup of the CO 2 laser "SKATE" and its output characteristics are described. The system is based on a self-sustained gas discharge module with x-ray preionization that ensures reliability and stable repetition rate operation at 1 Hz for a long time. Measurement of the initial electron density in the discharge volume produced by an x-ray gun is presented for different gases and their mixtures, which is of independent interest for some applications of x-ray preionization. Data on measurements of the low-intensity signal gain and laser parameters for a free-running generator configuration are presented as well as long-term operation characteristics. This laser system has been used as a CO 2 generator with gigawatt peak intensity and high spatial-temporal characteristics. In particular, the laser can be used as a driver for a source of multicharged ions in contrast to the laboratory prototypes previously investigated.
Production of Multi-Terawatt Time-Structured CO[sub 2] Laser Pulses for Ion Acceleration
2010
The UCLA Neptune Laboratory CO 2 laser system has been recently upgraded to produce 3ps multi-terawatt 10µm laser pulses. The laser energy is distributed over several 3ps pulses separated by 18ps. These temporally structured pulses are applied for laser driven ion acceleration in an H 2 gas jet at a measured plasma density of 2x10 19 cm −3. Protons in excess of 20MeV have been observed in the forward direction and with energy spreads (∆E/E∼10%).
Development of laser-plasma generator for injector of C4+ ions
Laser and Particle Beams, 2012
The results of the development of the ITEP accelerator carbon ion injector based on a repetition-rate CO2 laser ion source are described. The improvement includes a modified pulsed HV-feeding generator for the discharge formation in the laser gas mixture. The advanced discharge module ensures essential increase of the laser active volume and specific electrical deposition energy. The comparative computer simulations of the discharge characteristics for the improved and the prototype lasers are applied. The design and the output spatial-temporal parameters of the free-running laser “Malish-M” are shown, so the significant increase of the laser power is reached. The spatial characteristics of the laser beam obtained with diffraction calculations are compared to measured radial distribution of the energy density. The target laser intensity and the different channels of the energy loss of the laser beam in the optical scheme are estimated. Finally, the output C4+ current trace of heavy ...
Developments at the CERN laser ion source
Review of Scientific Instruments, 1998
The high current, high charge-state ion beam which can be extracted from a laser produced plasma is well suited, after initial acceleration, for injection into synchrotrons. At CERN, the production of a heavy ion beam using a CO 2 laser ion source is studied. The latest results of experiments with a tantalum ion beam with charge states up to 23ϩ and accelerated by a radio frequency quadrupole from 6.9 to 100 keV/u, are presented along with simulations of the low energy beam transport. The ion yield at the desired charge state, the pulse to pulse stability of the ion beam, and the system reliability are all of major interest. Work is under way to replace the low repetition rate free-running laser oscillator by a master oscillator and power amplifier system. The master oscillator is operational and the first results of measurements of its beam quality and stability are presented.
Status of the CO2 laser ion source at CERN
Review of Scientific Instruments, 2000
A laser ion source using a CO 2 laser focused onto a solid target is under study at CERN for the production of high currents of highly-charged heavy ions, for possible use in the pre-injector for LHC. A new expansion and extraction layout was installed in this test facility, improving the alignment and making the target to extraction distance more flexible. A two solenoid beam transport system was studied for providing the matching of the beam to an RFQ. An electrostatic beam transport using gridded electrostatic lenses was designed and constructed as an alternative to a magnetic system. Results show an increased overall current transmission for the electrostatic case. Investigation of the laser parameters required for the production of 1.4x10 10 Pb 25+ ions in a 5 µs pulse, has been performed using the TIR-1 laser facility at power densities up to 10 14 Wcm -2 for a focal spot size of 65 µm. The results of the latest scaling are presented.
High-power electron beam preionized CO2 laser modelling. II. Analysis of plasma characteristics
Il Nuovo Cimento B, 1982
]n this paper the results of a theoretical analysis on the properties of electric discharges used in high-power molecular lasers are presented. The mathematical model is based on continuity and transport equations for electrons and ions and on the equations concerning the electric field. The model is used both for self-sustained and for non-selfsustained discharges operating in conditions as usually attained in highpower lasers. Spatial profiles of the electrical parameters near the electrodes and in the plasma area are assessed. Current-voltage characteristics are iinally derived for a He:N~:C02:CO laser mixture. A future work will be devoted both to the kinetic and to the fluid-dinamic model of the laser and to a comparison of the numerical results obtai,md with available experimental data.
Highly charged heavy ion generation by pulsed laser irradiation
Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2003
At the Laboratorio Nazionale del Sud of the National Institute of Nuclear Physics (INFN-LNS) of Catania, different ion sources of multi-charged ions are available, including electron cyclotron resonance ion sources (ECRIS) and a laser ion source, based on a high energy infra-red pulsed laser working in single shot or pulsed mode with repetition rate of 30 Hz. A hybrid ion source based on laser source (Nd:Yag pulsed laser at 10 10 W/cm 2 ) coupled to ECRIS is under construction to generate intense heavy ion beams at very high charge states. This source will use the ECR plasma to enhance the ion charge state from 5 þ -10 þ to about 30 þ -40 þ . The description of this equipment will be shown along with some results of the preliminary experiments. Additional studies were carried out at Prague Asterix Laser Source (PALS) by means of a iodine pulsed laser at 10 15 W/cm 2 , which produces a high density-high temperature plasma. The description of the ablation effects of metals and the study of the film deposition on different substrates will be presented. Preliminary investigations on heavy ions implantation will be also outlined.
Generation of 13.9 µm radiation from CO2 by cascade lasing or externally applied CO2 laser
Pramana, 2010
13.9 µm radiation from the 10 0 0-01 1 0 transition can be obtained from a CO 2 laser by saturating the 00 0 1-10 0 0, 10.6 µm transition with an internally generated q-switched pulse or by the application of an external 10.6 µm pulse. Because of Fermi resonance between the symmetric stretch and the bending modes, decay of population from the 10 0 0 level is fast, and such lasers operate at low power and energies. A theoretical model was developed to study such lasers. The results of the calculations indicate that a large-aperture E-beam-sustained discharge is effective for excitation of the cryogenically cooled gain medium, which uses He rich mixture at low pressure. The system is scalable and capable of generating large powers and energies.
Review of Scientific Instruments, 2016
A laser ion source based on Nd:YAG laser has been being studied at the Institute of Modern Physics for the production of high intensity high charge state heavy ion beams in the past ten years, for possible applications both in a future accelerator complex and in heavy ion cancer therapy facilities. Based on the previous results for the production of multiple-charged ions from a wide range of heavy elements with a 3 J/8 ns Nd:YAG laser [Zhao et al., Rev. Sci. Instrum. 85, 02B910 (2014)], higher laser energy and intensity in the focal spot are necessary for the production of highly charged ions from the elements heavier than aluminum. Therefore, the laser ion source was upgraded with a new Nd:YAG laser, the maximum energy of which is 8 J and the pulse duration can be adjusted from 8 to 18 ns. Since then, the charge state distributions of ions from various elements generated by the 8 J Nd:YAG laser were investigated for different experimental conditions, such as laser energy, pulse duration, power density in the focal spot, and incidence angle. It was shown that the incidence angle is one of the most important parameters for the production of highly charged ions. The capability of producing highly charged ions from the elements lighter than silver was demonstrated with the incidence angle of 10 • and laser power density of 8 × 10 13 W cm −2 in the focal spot, which makes a laser ion source complementary to the superconducting electron cyclotron resonance ion source for the future accelerator complex especially in terms of the ion beam production from some refractory elements. Nevertheless, great efforts with regard to the extraction of intense ion beams, modification of the ion beam pulse duration, and reliability of the ion source still need to be made for practical applications.