Concentrations and fingerprints of PAHs and PCBs adsorbed onto marine plastic debris from the Indonesian Cilacap coast and theNorth Atlantic gyre (original) (raw)
Related papers
Pollutants in Plastics within the North Pacific Subtropical Gyre
Environmental science & technology, 2017
Here we report concentrations of pollutants in floating plastics from the North Pacific accumulation zone (NPAC). We compared chemical concentrations in plastics of different types and sizes, assessed ocean plastic potential risks using sediment quality criteria, and discussed the implications of our findings for bioaccumulation. Our results suggest that at least a fraction of the NPAC plastics is not in equilibrium with the surrounding seawater. For instance, 'hard plastic' samples had significantly higher PBDE concentrations than 'nets and ropes' samples, and 29% of them had PBDE composition similar to a widely used flame-retardant mixture. Our findings indicate that NPAC plastics may pose a chemical risk to organisms as 84% of the samples had at least one chemical exceeding sediment threshold effect levels. Furthermore, our surface trawls collected more plastic than biomass (180 times on average), indicating that some NPAC organisms feeding upon floating particles...
International Journal of Environmental Research and Public Health
Plastic pollution has become one of the most serious environmental problems, and microplastics (MPs, particles < 5 mm size) may behave as a vehicle of organic pollutants, causing detrimental effects to the environment. Studies on MP-sorbed organic pollutants lack methodological standardization, resulting in a low comparability and replicability. In this work, we reviewed 40 field studies of MP-sorbed organic contaminants using PRISMA guidelines for acquiring information on sampling and analytical protocols. The papers were also scored for their reliability on the basis of 7 criteria, from 0 (minimum) to 21 (maximum). Our results showed a great heterogeneity of the methods used for the sample collection, MPs extraction, and instruments for chemicals’ identification. Measures for cross-contamination control during MPs analysis were strictly applied only in 13% of the studies, indicating a need for quality control in MPs-related research. The most frequently detected MP-sorbed chemi...
The pollution of the marine environment by plastic debris: a review
The deleterious effects of plastic debris on the marine environment were reviewed by bringing together most of the literature published so far on the topic. A large number of marine species is known to be harmed and/or killed by plastic debris, which could jeopardize their survival, especially since many are already endangered by other forms of anthropogenic activities. Marine animals are mostly affected through entanglement in and ingestion of plastic litter. Other less known threats include the use of plastic debris by ''invader'' species and the absorption of polychlorinated biphenyls from ingested plastics. Less conspicuous forms, such as plastic pellets and ''scrubbers'' are also hazardous. To address the problem of plastic debris in the oceans is a difficult task, and a variety of approaches are urgently required. Some of the ways to mitigate the problem are discussed.
Daily apportionment of stranded plastic debris in the Bintan Coastal area, Indonesia
Marine Pollution Bulletin, 2019
This study aims to provide a baseline report of the apportionment of stranded plastic debris (macro) in Bintan Island beaches. Their quantity and composition were assessed during a 45-day survey demonstrating the occurrence of the 3378 plastic fragments, which were, in decreasing order, constituted by LDPE (22.9%), PS (19.5%), PP (16.6%), PET (10.4%), HDPE (9.2%), PVC (7.2%), PU (4.9%), polyester (4.7%), polyamide (4.3%), and styrene/butadiene (0.3%). The abundance ranged from 1.2 to 4.7 items/m 2. Additional apportionment ranged from 0.03 to 0.15 items/m 2 per day with an arithmetic mean of 0.09 ± 0.05 items/m 2 per day, mainly related to domestic waste influenced by hydrodynamic action such as longshore current and wind dynamics. Furthermore, we suggested mitigation measures focused on local action to address the plastic debris problem in Bintan beaches, which are typical of the coasts of small islands in Indonesia. Since 2015, plastic pollution has attracted public attention in Indonesia. After being declared as the second largest plastic contributor to the marine environment (Jambeck et al., 2015), through public information dissemination acts, i.e., conferences, seminars, and community action, all related stakeholders (academia, business sector, community , government, and media) enforced their roles to solve the claimed problem. However, the Indonesian Government has stipulated recent regulations through Presidential Decree No. 83 concerning waste handling in the sea, which constituted the national action plan to reducing 70% of marine plastic in the marine environment by the year 2025 (Perpres 83/2018). Nevertheless, the real data to contradict Jambeck's model are still lacking in Indonesia. Limited studies have been conducted by Indonesian scientists. Marine contamination with plastic debris has been reported in the Indonesian area by several authors. For instance, Syakti et al. (2017, 2018) reported the occurrence of macroplastics and floating microplastics in the southern part of Java in the adjacent Indian Ocean and the Bintan area. Cordova et al. (2018) reported the presence of microplastics in coral reef sediment in Lombok and in the deep sea of the southwestern Sumatra coast (Cordoba and Wahyudi, 2016). Recent studies were also conducted on the occurrence of microplastics in biota (Rochman et al. 2015; Lubis et al., 2019) and the absorbed co-pollutants, i.e., PAHs and PCBs (Bouhroum et al. 2019), as well as the impact of microplastics (Syakti et al. 2019). The present study investigated the apportionment of stranded plastic debris (macro) on Bintan Island (Fig. 1), an area in Indonesia that is close to the Ma-lacca and Singapore Straits, which is recognized as the most crowded sea-lane and a maritime traffic zone and could potentially experience a sea-based leakage of plastic from ship lines. Seven sites with different orientations and nearby activity were studied around Bintan and were classified as touristic (S1-S4), industrial (S5), and domestic (S6) harbors and/or as for industrial activities. For each station, a 180 m2 permanent quadrat (6 × 30 m) was designed in the intertidal zone, and the plastic items were then enumerated. The polymers were also identified directly on site using a Mobil-IR Portable FTIR Spectrometer (Bruker Optik GmbH, Germany) with Bruker OPUS software. Each site was visited at least three times during a period of 45 days, with a minimum waiting time of 7 days between each visit. The stranded plastics occurring from several products such as fishing nets, ropes, bottles, plastic cups, plastic bags, straws, rubber items, sandals, and lighters were analyzed using the Mobil-IR Portable FTIR system. We conducted 10-15 analyses for each of the found products, and the remaining products with the same/si-milar visual perception could be directly counted as the same specific polymer. We completed at least 250-300 analyses with the FTIR system. Next, to assess the impact of weathering on plastic, a seabed inspection for sunken debris was performed to compare the different aging conditions of the sunken PET as a polymer model. PET was chosen because of its easy identification through visual inspection before confirmation by FTIR and its stability under outdoor light (Summers and Rabinovitch, 1999). PET samples were visually analyzed , and some samples were removed for further FTIR analysis. Twodimensional hydrodynamic models were conducted using MIKE 21 software with the mesh generator module to estimate the boundary conditions limiting the open and enclosed areas of the model (Salim et al., 2016). Wind data were obtained from the European Centre for Medium Range Weather Forecast (ECMWF), which was subsequently extracted using Ocean Data View software to obtain zonal and mer-idional wind components. Data were then converted to obtain the direction and wind speed values simulating the current hydrodynamic model for August 1, 2018. To assess the baseline level, from the 180 m2 area at each permanent sampling point, we found that the plastic debris number ranged from 214 to 842 items (1.2 items/m2-4.7 items/m2). The highest number was at station S6 (842 items), followed by stations S4 (533 items) and S7 (511 items) (Table 1). Three other stations that shared the same large magnitude were S1 (457 items), S5 (411 items), and S3 (398 items). The cleanest station was S2 (214 items).
Marine Pollution by Plastic: Menace to the Marine Environment
BIMRAD PAAL Magazine, 2023
Marine pollution has been a growing concern for decades. Various forms of pollutants threaten the Bangladesh coast. With a large population within a tiny land mass, Bangladesh will be more focused on the Bay of Bengal in the future for economic growth. Marine pollution is a cause of concern for Bangladesh and needs to be addressed right now before it goes beyond the manageable threshold. Most marine plastic pollution comes from the land. The ever-growing dependence of humans on plastic has filled the oceans and the land. The rising level of plastic dumps in the oceans is suffocating, ingesting and entangling the life underwater and above it. It is learnt that the Bay of Bengal and the South China Sea are the new marine plastic hotspots in Asia. Hence, it is imperative to understand the plastic pollution in the Bay of Bengal, its impact on us and ecological imbalance as a whole.
Plastic pollution in the South Pacific subtropical gyre
Marine Pollution Bulletin, 2013
Plastic marine pollution in the open ocean of the southern hemisphere is largely undocumented. Here, we report the result of a (4489 km) 2424 nautical mile transect through the South Pacific subtropical gyre, carried out in March-April 2011. Neuston samples were collected at 48 sites, averaging 50 nautical miles apart, using a manta trawl lined with a 333 lm mesh. The transect bisected a predicted accumulation zone associated with the convergence of surface currents, driven by local winds. The results show an increase in surface abundance of plastic pollution as we neared the center and decrease as we moved away, verifying the presence of a garbage patch. The average abundance and mass was 26,898 particles km À2 and 70.96 g km À2 , respectively. 88.8% of the plastic pollution was found in the middle third of the samples with the highest value of 396,342 particles km À2 occurring near the center of the predicted accumulation zone.
Plastic as a Persistent Marine Pollutant
Annual Review of Environment and Resources, 2017
Synthetic organic polymers—or plastics—did not enter widespread use until the 1950s. By 2015, global production had increased to 322 million metric tons (Mt) year−1, which approaches the total weight of the human population produced in plastic every year. Approximately half is used for packaging and other disposables, 40% of plastic waste is not accounted for in managed landfills or recycling facilities, and 4.8–12.7 Mt year−1 enter the ocean as macroscopic litter and microplastic particles. Here, we argue that such mismanaged plastic waste is similar to other persistent pollutants, such as dichlorodiphenyltrichloroethane (DDT) or polychlorinated biphenyls (PCBs), which once threatened a “silent spring” on land. Such a scenario seems now possible in the ocean, where plastic cannot be easily removed, accumulates in organisms and sediments, and persists much longer than on land. New evidence indicates a complex toxicology of plastic micro- and nanoparticles on marine life, and transfe...
Annual Review of Environment and Resources Plastic as a Persistent Marine Pollutant
2017
Synthetic organic polymers—or plastics—did not enter widespread use until the 1950s. By 2015, global production had increased to 322 million metric tons (Mt) year−1, which approaches the total weight of the human population produced in plastic every year. Approximately half is used for packaging and other disposables, 40% of plastic waste is not accounted for in managed landfills or recycling facilities, and 4.8–12.7 Mt year−1 enter the ocean as macroscopic litter and microplastic particles. Here, we argue that such mismanaged plastic waste is similar to other persistent pollutants, such as dichlorodiphenyltrichloroethane (DDT) or polychlorinated biphenyls (PCBs), which once threatened a “silent spring” on land. Such a scenario seems now possible in the ocean, where plastic cannot be easily removed, accumulates in organisms and sediments, and persists much longer than on land. New evidence indicates a complex toxicology of plastic microand nanoparticles on marine life, and transfer ...
Environmental Science and Pollution Research
The current study aims to investigate the spatiotemporal distribution of microplastics (MPs) in the Miri coast, targeting their occurrences, characterisation, and potential sources. For a periodical study, coastal sediments were collected from three different time intervals (monsoon, post-monsoon, and post-COVID) and subjected to stereomicroscope, ATR-FTIR, and SEM-EDX analyses. These results show a significant increase of MPs in post-COVID samples by approximately 218% and 148% comparatively with monsoon and post-monsoon samples, respectively. The highest concentration of MPs was detected near the river mouths and industrial areas where the waste discharge rate and anthropogenic activities dominate. Fibre-type MPs are the most abundant, with an average of nearly 64%, followed by fragments, films, microbeads, and foams. The most dominant polymer types were polytetrafluoroethylene (PTFE), polyethylene (PE), polypropylene (PP), polystyrene (PS), and polyester (PET). Overall, the curre...