Analysis of elevated temperature flow and work hardening behaviour of service-exposed 2.25Cr-1Mo steel using Voce equation (original) (raw)
Effect of competing hardening and softening mechanisms on the flow stress curve modeling of ultra-low carbon steel at high temperatures
Oscar Balancin, Alberto M Jorge Junior
Journal of Materials Processing Technology, 2003
View PDFchevron_right
Temperature dependence of the strength-differential effect in hardened steels
Fred Fletcher
Metallurgical Transactions, 1974
View PDFchevron_right
Influence of temperature and post weld heat treatment on tensile stress–strain and work hardening behaviour of modified 9Cr–1Mo steel
D P RAO PALAPARTI
Materials & Design (1980-2015), 2013
View PDFchevron_right
Advanced Crystal Plasticity Modeling of Multi-Phase Steels: Work-Hardening, Strain Rate Sensitivity and Formability
Behnam Shakerifard
Applied Sciences, 2021
View PDFchevron_right
Tensile flow and work hardening behaviour of 9Cr–1Mo ferritic steel in the frame work of Voce relationship
MD Mathew
Materials Science and Engineering: A, 2011
View PDFchevron_right
Modelling of Flow Stress and Prediction of Workability by Processing Map for Hot Compression of 43CrNi Steel
Sunil Kumar Rajput
ISIJ International, 2017
View PDFchevron_right
Mechanisms and Modeling of Bake-Hardening Steels: Part I. Uniaxial Tension
V. Ballarin, Xavier Lemoine
Metallurgical and Materials Transactions A, 2009
View PDFchevron_right
On the mechanisms of work hardening and flow-stress saturation
Tanja Pettersen, Knut Marthinsen
Scripta Materialia, 2000
View PDFchevron_right
Prediction of steel flow stresses under hot working conditions
Oscar Balancin, Alberto M Jorge Junior
Materials Research, 2005
View PDFchevron_right
Strengthening contributions of mechanical twinning and dislocations to the flow stress of 1.1C-12.5Mn steel at a strain rate of unity per second: Quantitative analysis
Mahmoud Khedr
View PDFchevron_right
Constitutive description of Fe-Mn23-C0.6 steel deformed under hot-working conditions
Mariana H Staia
International Journal of Mechanical Sciences, 2015
View PDFchevron_right
Numerical Prediction of Creep Rupture Life of Ex-Service and As-Received Grade 91 Steel at 873 K
Imam Ul Ferdous
International Journal of Automotive and Mechanical Engineering
View PDFchevron_right
Modeling of High-Temperature Flow Stress of VN and Nb-Ti Microalloyed Steels during Hot Compressive Deformation
Charles Siyasiya
Journal of Materials Engineering and Performance, 2020
View PDFchevron_right
Quantification of the effect of transformation-induced geometrically necessary dislocations on the flow-curve modelling of dual-phase steels
Ali Ramazani
View PDFchevron_right
Effect of prior deformation on the subsequent creep and anelastic recovery behaviour of an advanced martensitic steel: Unified constitutive modelling
Mostafa Baghani
International Journal of Mechanical Sciences, 2020
View PDFchevron_right
A dislocation density-based model for the work hardening and softening behaviors upon stress reversal
Paulina Graca
Archives of Civil and Mechanical Engineering
View PDFchevron_right
The Iso 5832-9 Steel Hot Flow Curves, an Analytical Study
Samuel Filgueiras Rodrigues
ABM Proceedings
View PDFchevron_right
Finite-element and finite-difference simulations of the mechanical behavior of austenitic steels at different strain rates and temperatures
Ruslan Balokhonov
Mechanics of Materials, 2009
View PDFchevron_right
Analysis of the Dependence of Material Properties on Temperature – Steel 1.4122
Goran Turkalj
High Temperature Materials and Processes, 2012
View PDFchevron_right
Mechanical behavior of low carbon steel subjected to strain path changes: Experiments and modeling
Carlos Tome
Acta Materialia, 2016
View PDFchevron_right
QUANTITATIVE ASSESSMENT OF THE EFFECTIVENESS OF HARDENING MECHANISMS FOR CARBON AND LOWALLOY STEELS WITH DIFFERENT STRUCTURAL STATES
IAEME Publication
IAEME, 2019
View PDFchevron_right
On the development of stage IV hardening using a model based on the mechanical threshold
S. Kok
Acta Materialia, 2002
View PDFchevron_right
A combined isotropic, kinematic and distortional hardening model for aluminum and steels under complex strain-path changes
Bjørn Holmedal
International Journal of Plasticity
View PDFchevron_right
Novel Modeling of the Work-Hardening Curve
Tadeusz Hryniewicz
International Letters of Chemistry Physics and Astronomy, 2013
View PDFchevron_right
Flow stress, dynamic restoration, strain hardening and ductility in hot working of 316 steel
H. McQueen
Journal of Materials Processing Technology, 1990
View PDFchevron_right
Plastic deformation of 1020 steel over a wide range of strain rates and temperatures
Amos Gilat
International Journal of Plasticity, 1997
View PDFchevron_right
Application of the Kocks–Mecking model to tensile deformation of an austenitic 25Cr–19Ni steel
Noriyuki Tsuchida
Acta Materialia, 2001
View PDFchevron_right