Residues in the HIV-1 Capsid Assembly Inhibitor Binding Site Are Essential for Maintaining the Assembly-competent Quaternary Structure of the Capsid Protein (original) (raw)
Related papers
Biophysical Journal, 2007
The protein CA forms the mature capsid of human immunodeficiency virus. Hexamerization of the N-terminal domain and dimerization of the C-terminal domain, CAC, occur during capsid assembly, and both domains constitute potential targets for anti-HIV inhibitors. CAC homodimerization occurs mainly through its second helix, and is abolished when its sole tryptophan is mutated to alanine. Previous thermodynamic data obtained with the dimeric and monomeric forms of CAC indicate that the structure of the mutant resembles that of a monomeric intermediate found in the folding and association reactions of CAC. We have solved the three-dimensional structure in aqueous solution of the monomeric mutant. The structure is similar to that of the subunits in the dimeric, nonmutated CAC, except the segment corresponding to the second helix, which is highly dynamic. At the end of this region, the polypeptide chain is bent to bury several hydrophobic residues and, as a consequence, the last two helices are rotated 90°when compared to their position in dimeric CAC. The previously obtained thermodynamic data are consistent with the determined structure of the monomeric mutant. This extraordinary ability of CAC to change its structure may contribute to the different modes of association of CA during HIV assembly, and should be taken into account in the design of new drugs against this virus.
The structural biology of HIV assembly
Current Opinion in Structural Biology, 2008
HIV assembly and replication proceed through formation of morphologically distinct immature and mature viral capsids that are organized by the Gag polyprotein (immature) and by the fully processed CA protein (mature). The Gag polyprotein is composed of three folded polypeptides (MA, CA, and NC) and three smaller peptides (SP1, SP2, and p6) that function together to coordinate membrane binding and Gag-Gag lattice interactions in immature virions. Following budding, HIV maturation is initiated by proteolytic processing of Gag, which induces conformational changes in the CA domain and results in assembly of the distinctive conical capsid. Retroviral capsids are organized following the principles of fullerene cones, and the hexagonal CA lattice is stabilized by three distinct interfaces. Recently identified inhibitors of viral maturation act by disrupting the final stage of Gag processing, or by inhibiting formation of a critical intermolecular CA-CA interface in the mature capsid. Following release into a new host cell, the capsid disassembles and host cell factors can potently restrict this stage of retroviral replication. Here, we review the structures of immature and mature HIV virions, focusing on recent studies that have defined the global organization of the immature Gag lattice, identified sites likely to undergo conformational changes during maturation, revealed the molecular structure of the mature capsid lattice, demonstrated that capsid architectures are conserved, identified the first capsid assembly inhibitors, and begun to uncover the remarkable biology of the mature capsid.
Journal of Virology, 2004
The retroviral Gag precursor plays an important role in the assembly of virion particles. The capsid (CA) protein of the Gag molecule makes a major contribution to this process. In the crystal structure of the free CA protein of the human immunodeficiency virus type 1 (HIV-1), 11 residues of the C terminus were found to be unstructured, and to date no information exists on the structure of these residues in the context of the Gag precursor molecule. We performed phylogenetic analysis and demonstrated a high degree of conservation of these 11 amino acids. Deletion of this cluster or introduction of various point mutations into these residues resulted in significant impairment of particle infectivity. In this cluster, two putative structural regions were identified, residues that form a hinge region (353-VGGP-356) and those that contribute to an ␣-helix (357-GHKARVL-363). Overall, mutations in these regions resulted in inhibition of virion production, but mutations in the hinge region demonstrated the most significant reduction. Although all the Gag mutants appeared to have normal Gag-Gag and Gag-RNA interactions, the hinge mutants were characterized by abnormal formation of cytoplasmic Gag complexes. Gag proteins with mutations in the hinge region demonstrated normal membrane association but aberrant rod-like membrane structures. More detailed analysis of these structures in one of the mutants demonstrated abnormal trapped Gag assemblies. These data suggest that the conserved CA C terminus is important for HIV-1 virion assembly and release and define a putative target for drug design geared to inhibit the HIV-1 assembly process.
Retrovirology, 2007
Background The mature HIV-1 conical core formation proceeds through highly regulated protease cleavage of the Gag precursor, which ultimately leads to substantial rearrangements of the capsid (CAp24) molecule involving both inter- and intra-molecular contacts of the CAp24 molecules. In this aspect, Asp51 which is located in the N-terminal domain of HIV-1 CAp24 plays an important role by forming a salt-bridge with the free imino terminus Pro1 following proteolytic cleavage and liberation of the CAp24 protein from the Pr55Gag precursor. Thus, previous substitution mutation of Asp51 to alanine (D51A) has shown to be lethal and that this invariable residue was found essential for tube formation in vitro, virus replication and virus capsid formation. Results We extended the above investigation by introducing three different D51 substitution mutations (D51N, D51E, and D51Q) into both prokaryotic and eukaryotic expression systems and studied their effects on in vitro capsid assembly and vi...
A Trimer of Dimers Is the Basic Building Block for Human Immunodeficiency Virus-1 Capsid Assembly
Biochemistry, 2012
Human immunodeficiency virus-1 (HIV-1) capsid protein (CA) has become a target of antiviral drug design in recent years. The recognition that binding of small molecules to the CA protein can result in the perturbation of capsid assembly or disassembly has led to mathematical modeling of the process. Although a number of capsid assembly models have been developed using biophysical parameters of the CA protein obtained experimentally, there is currently no model of CA polymerization that can be practically used to analyze in vitro CA polymerization data to facilitate drug discovery. Herein, we describe an equilibrium model of CA polymerization for the kinetic analysis of in vitro assembly of CA into polymer tubes. This new mathematical model has been used to assess whether a triangular trimer of dimers rather than a hexagonal hexamer can be the basic capsomere building block of CA polymer. The model allowed us to quantify for the first time the affinity for each of the four crucial interfaces involved in the polymerization process and indicated that the trimerization of CA dimers is a relatively slow step in CA polymerization in vitro. For wild-type CA, these four interfaces include the interface between two monomers of a CA dimer (K D = 6.6 μM), the interface between any two dimers within a CA trimer of dimers (K D = 32 nM), and two types of interfaces between neighboring trimers of dimers, either within the same ring around the perimeter of the polymer tube (K D = 438 nM) or from two adjacent rings (K D = 147 nM). A comparative analysis of the interface dissociation constants between wild-type and two mutant CA proteins, cross-linked hexamer (A14C/E45C/W184A/M185A) and A14C/E45C, yielded results that are consistent with the trimer of dimers with a triangular geometry being the capsomere building block involved in CA polymer growth. This work provides additional insights into the mechanism of HIV-1 CA assembly and may prove useful in elucidating how small molecule CA binding agents may disturb this essential step in the HIV-1 life cycle.
Protein Science, 2004
The type 1 HIV presents a conical capsid formed by ∼1500 units of the capsid protein, CA. Homodimerization of CA via its C-terminal domain, CA-C, constitutes a key step in virion assembly. CA-C dimerization is largely mediated by reciprocal interactions between residues of its second ␣-helix. Here, we show that an N-terminal-acetylated and C-terminal-amidated peptide, CAC1, comprising the sequence of the CA-C dimerization helix plus three flanking residues at each side, is able to form a complex with the entire CA-C domain. Thermal denaturation measurements followed by circular dichroism (CD), NMR, and size-exclusion chromatography provided evidence of the interaction between CAC1 and CA-C. The apparent dissociation constant of the heterocomplex formed by CA-C and CAC1 was determined by several biophysical techniques, namely, fluorescence (using an anthraniloyl-labeled peptide), affinity chromatography, and isothermal titration calorimetry. The three techniques yielded similar values for the apparent dissociation constant, in the order of 50 M. This apparent dissociation constant was only five times higher than was the dissociation constant of both CA-C and the intact capsid protein homodimers (10 M).
Structure of a Monomeric Mutant of the HIV-1 Capsid Protein
Biochemistry, 2011
The capsid protein (CA) of the HIV-1 virus plays a significant role in the assembly of the immature virion, and is the critical building block of its mature capsid. Thus, there has been a significant interest in the CA protein as a target in the design of inhibitors of early and late stage events in the HIV-1 virus replication cycle. However, due to its inherent flexibility from the interdomain linker and the monomer-dimer equilibrium in solution, HIV-1 wild-type CA monomer has defied structural determinations by X-ray crystallography and NMR spectroscopy. Here we report the detailed solution structure of the full length HIV-1 CA using a monomeric mutant that, though non-infective, preserves many of the critical properties of the wild-type protein. The structure shows independently folded N-terminal (NTD) and C-terminal domains (CTD) joined by a flexible linker. The CTD domain shows some differences from that of the dimeric wild-type CTD structures. This study provides insights into the molecular mechanism of the wild-type CA dimerization critical for capsid assembly. The monomeric mutant allows investigation of interactions of CA with human cellular proteins exploited by the HIV-1 virus, directly in solution without the complications associated with the monomer-dimer equilibrium of the wild-type protein. This structure also permits the design of inhibitors directed at a novel target, viz., interdomain flexibility, as well as inhibitors that target multiple interdomain interactions critical for assembly and interactions of CA with host cellular proteins that play significant roles within the replication cycle of the HIV-1 virus.