Optimization of reverse logistics network of End of Life Vehicles under fuzzy supply: A case study for Istanbul Metropolitan Area (original) (raw)
Related papers
Sustainability
The automotive industry is one of the largest consumers of natural resources, and End-of-Life Vehicles (ELVs) form bulky wastes when they reach the end of their useful life, hence environmental concerns. Efficiency in recycling ELVs is therefore becoming a major concern to address the number of ELVs collected and recycled to minimize environmental impacts. This paper seeks to describe several activities of a closed-loop reverse logistics supply chain for the collection and recycling of ELVs and to identify the related potential risks involved. This study further investigated the potential risks for managing the efficient recycling of ELVs by modeling and viewing the end-of-life vehicle (ELV) recycling system as a reverse logistics supply chain. ELV recycling steps and processes, including collection and transportation, as well as the laws and technologies, were analyzed for risk factor identification and analysis. The major aim of this research is to perform a unified hierarchical r...
Modelling of the location of vehicle recycling facilities: A case study in Poland
The technical progress causes that increasing number of used devices presents a threat for environment, particularly in the rural areas. It can be prevented by organizing a proper system of waste disposal. Currently, the most important problem to solve is recycling of vehicles. The key element for the improvement of the functioning of the recycling network in Poland is to redesign the system so that it will allow for a reduction of the total cost related to the vehicle recycling. This paper presents a modelling approach that could be used to establish one important part of the reverse logistics (RL) network for end-of-life vehicles (ELVs) by defining the optimum locations for dismantling facilities. The proposed modelling approach is illustrated using Mazovia province in Poland as an example. The optimization criteria for the location of the elements of the recycling network are the components of the total cost of the ELV's recycling. Due to high complexity of the model a genetic algorithm has been adapted for solving the model and getting a good solution in a reasonable run time. The criteria of optimization was cost of the following processes: transportation, storage, and dismantling of ELVs. The results of simulation proved that the transportation costs of parts and materials may amount to about 70%, and that the cost of dismantling may exceed 25% of the total cost of recycling. The obtained results confirmed that genetic algorithm method can be used effectively to location the ELV's dismantling facilities. The effect of changing the location of processing facilities on the location of dismantling stations was also studied. The developed model is universal and may be used to determine the locations of different kinds of facilities organized in a reverse recycling network.
The optimization of vehicles recycling facility location
Urban Transport XVII, 2011
Today the issue of the organization of end-of-life vehicle recycling network has become one of the essential elements related to the car manufacturing industry, particularly in developed economies. The formation of a recycling network should be planned and organized carefully to ensure its efficiency and resource optimization. That is why the creation of the network requires appropriate tools that will allow a proper location of the recycling network structural elements. Moreover, while designing a vehicle recycling network one needs to take many technical, organizational, legal and economic factors into account. Thanks to this, the process of developing of the network or locating new facilities will ensure maximum benefits equally for the network participants, the end-of-life vehicle owners and other stakeholders.
A fuzzy Bi-linear management model in reverse logistic chains
Yugoslav Journal of Operations Research, 2014
The management of the electrical and electronic waste (WEEE) problem in the uncertain environment has a critical effect on the economy and environmental protection of each region. The considered problem can be stated as a fuzzy non-convex optimization problem with linear objective function and a set of linear and non-linear constraints. The original problem is reformulated by using linear relaxation into a fuzzy linear programming problem. The fuzzy rating of collecting point capacities and fix costs of recycling centers are modeled by triangular fuzzy numbers. The optimal solution of the reformulation model is found by using optimality concept. The proposed model is verified through an illustrative example with real-life data. The obtained results represent an input for future research which should include a good benchmark base for tested reverse logistic chains and their continuous improvement. D.Tadić, P.Mimović, J.Kostić, M.Zahar-Đorđević / A Fuzzy Bi-Linear Management 2 Keywords: reverse logistic chain, electrical and electronic waste, linear relaxation, fuzzy linear programming MSC: 90C70.
A Literature Survey on Reverse Logistics of End of Life Vehicles
Southeast Europe Journal of Soft Computing
Today, recycling of used products and materials has become an increasingly important sector. Mankind, who uses the natural resources unconsciously, has found ways to improve recycling techniques when they realized that resources are becoming increasingly depleted. In the automotive sector, which is one of the largest sectors in the world, natural resources are being used to a great extent. According to the statistics, in 2009, approximately 9 million end-of-life vehicles (in Europe were withdrawn from traffic. Undoubtedly, this figure shows the necessity and importance of designing reverse logistics network optimized for ELVs. This research aims to determine the gaps in the literature by examining the studies made from the past to the present day in the field of reverse logistic network design for vehicles completed their life cycle. In this article, the studies in the fieldare analyzed based on objective functions, decision variables, constr handling metod, optimization methods used. Considered work are clustered using a special artificial neural network tool Organizing Maps (SOM), and the frequencies of the characteristics are shown in the study. This study, which includes a review of the literature and a clustering of studies, aims to guidethe researchers wo design of rreverse logistics networks for ELVs.
Today’s competitive business environment has resulted in increasing cooperation among companies as members of a network supply chain. Logistics network design is a major strategic issue due to its impact on the efficiency and responsiveness of the supply chain. Moreover, there has been a growing interest in reverse logistics due to environmental competition. In this study, the integration of forward and reverse logistics was investigated, and a dynamic model for the logistics planning of a remanufacturing company as a case study was proposed into an integer linear programming model. We present a four-level location problem with six types of facility to be located in an integrated logistics network. The model is presented to decide selecting supplier and allocating flow between layers in each period of time, and the fuzzy theory was employed for both forward and reverse demands.
A Multi-Product and Multi-Period Facility Location Model for Reverse Logistics
Reverse logistics has become an important entity in the world economy. Businesses increasingly have to cope with product returns, mandated environmental regulations and increasing costs associated with product disposal. This study presents a cost-minimization model for a multi-time-step, multi-type product waste reverse logistics system. The facility location is a central issue of the logistics networks. In this article we are interested in optimizing of the sites facility location for a reverse logistics network for product end of life. Specifically, we present a Mixed Linear Program model for the strategic problem of collection sites facility location, cannibalization and recycling. This model allows determining to open or to close the sites previously in the reverse logistics network. All of these decisions are to minimize the costs of end of life product returns at various time periods considered in the planning. To solve the mathematical program, we have used the evaluation pro...
In recent years, Reverse Logistics (RL) has gained much attention in supply chain and operations management area because of economic, social and governmental reasons. In literature, researchers addressed some problems associated with RL such as; network design, return forecasting, economic and environmental performance, lot sizing, vehicle routing, etc. However reverse logistics network design is the most important research topic in literature. In this study, we proposed Mixed Integer Linear Programming (MILP) model for reverse logistics network design (RLND) problem. Then the presented MILP model, which takes into consideration WEEE regulations published in 2011, is applied to real case study on electrical and electronic equipment recycling sector in Turkey. To the best of our knowledge, this study is the first to propose e-waste RLND for Turkey in electrical and electronic equipment sector.
Designing Fuzzy Reverse Supply Chain Network For E-Waste
Economy & Business Journal, 2019
The reverse supply chain network for e-Waste can be realized with certain operations; e-waste collection, separation, renewal activities, disassembly, recycling and distribution of refurbished products, semi-finished products, raw materials and harmful materials. This study aims to design the reverse supply chain network by considering the responsibility of the producer and the fuzzy parameters that should be dealt complying with the regulation. In order to better reflect the uncertainties in real life in the model, the parameters related to sales prices, product weights, costs, and product demands are assumed to be fuzzy. When the results are examined, the closer the μ value gets to 1, the more strictly the ranges in the equality constraints are controlled. It is also seen that there is a decrease in total gain and total cost.
Fuzzy logic evaluation of reverse logistics performance in the automotive industry
2011
This study was aimed at evaluating the performance of the reverse logistics process in the automotive industry. Fuzzy logic was applied in assessing the performance of the reverse logistics process using a case study. Linguistic variables were used to represent the performance of the metrics, and the variables were converted into fuzzy numbers. Fuzzy operators were applied to these numbers to obtain the performance of the measures and the entire process. From the results obtained, it was found that the approach adopted is applicable in evaluating the reverse logistics performance of the automotive industry. Based on this study, managers can assess their reverse logistics processes with ease and identify areas which are deficient, thus improving the overall performance of their reverse logistics. This will in turn support environmental management through waste reduction. In essence, this paper contributes to knowledge in performance measurement at large, thus putting forth a measurement approach for reverse logistics operations in the automotive industry. It also gives guidelines for future research in reverse logistics management.