Comparison of AQWA, GL Rankine, MOSES, OCTOPUS, PDStrip and WAMIT With Model Test Results for Cargo Ship Wave-Induced Motions in Shallow Water (original) (raw)
Related papers
Challenges with ship model tests in shallow water waves
2016
The new Energy Efficiency Design Index (EEDI) regulations issued by IMO consider among others ship manoeuvrability in adverse weather conditions. This has boosted research on ship manoeuvring in waves, which is being studied by different consortia in the world, e.g. SHOPERA [1] in Europe. At the Towing Tank for Manoeuvres in Shallow Water [2] (co-operation Flanders Hydraulics Research – Ghent University) both captive and free running manoeuvring model tests in regular waves have been conducted in shallow water conditions. During the tests, different challenges were experienced, related to the ship motions, the wave behaviour in finite water depths, and the propagation of waves along the tank. In addition, challenges due to interaction between the ship, the waves, and the tank’s sidewalls have also been encountered. In shallow water, such interaction is rather inevitable mainly due to the lower ship speeds attained. For this reason, tests with (regular) waves needed to be optimized a...
Practical application of two CFD codes for ship motions in arbitrary waves
Proceedings of 26th Symposium on Naval Hydrodynamics
Two versions of the CFD ship-motion simulation code named WISDAM-X and WISDAM-XI are described with a number of application examples. Since the non-linear free-surface and body-surface conditions are satisfied exactly on the moving ship body surface in the framework of overlapping grid system (WISDAM-X) or multi-block grid system (WISDAM-XI), both codes cope with arbitrary ship motions in arbitrary wave conditions. The WISDAM-X code is especially used for the design of conventional type ships. The simulation results demonstrate that the computed pressure on the hull surface of the bow-part shows fairly good agreement with the measured data in a wide range of wave conditions. The simulations of the cases in the oblique waves elucidate the formation of unsteady free-surface- shock-wave which plays an important role for the added resistance. The WISDAM-XI code is used for the prediction of hydrodynamic performance of multi-hull vessels. Resistance, seakeeping performance and ride comfort of monohull, catamaran and trimaran vessels is estimated by the CFD simulation in waves from various directions.
Journal of Marine Science and Engineering
A new uncertainty quantifier is presented for linear transfer functions of wave-induced ship motions and loads obtained by various seakeeping codes. The numerical simulations are conducted for the high-speed Flokstra container ship in regular waves at various heading angles, and the results are compared with existing experimental data. The study employs five numerical codes that are based on three different seakeeping theories, namely strip theory, 3D frequency-domain method, and 3D time-domain method. Multiple measures are applied to quantify the uncertainty in the calculated transfer functions, such as frequency-independent model error, coefficient of determination, and the total difference. In addition, a new measure of uncertainty, termed modified total difference, is proposed for determining the uncertainty of individual seakeeping codes based on experimental data rather than the mean of results obtained by numerical codes. Results show that the uncertainty measures can identif...
Journal of Applied Mathematics, 2012
This paper describes the development of alternative time domain numerical simulation methods for predicting large amplitude motions of ships and floating structures in response to incoming waves in the frame of potential theory. The developed alternative set of time domain methods simulate the hydrodynamic forces acting on ships advancing in waves with constant speed. For motions' simulation, the diffraction forces and radiation forces are calculated up to the mean wetted surface, while the Froude-Krylov forces and hydrostatic restoring forces are calculated up to the undisturbed incident wave surface in case of large incident wave amplitude. This enables the study of the above waterline hull form effect. Characteristic case studies on simulating the hydrodynamic forces and motions of standard type of ships have been conducted for validation purpose. Good agreement with other numerical codes and experimental data has been observed. Furthermore, the added resistance of ships in waves can be calculated by the presented methods. This capability supports the increased demand of this type of tools for the proper selection of engine/propulsion systems accounting for ship's performance in realistic sea conditions, or when optimizing ship's sailing route for minimum fuel consumption and toxic gas emissions.
A 3D Method to Evaluate Motions and Loads of Ships with Forward Speed in Waves
Proc. 5th Int. Congress on Marine Technology, IMAEM 90
Morions and wave loads ot a ship moving with constant forward speed in waves were investigated using a method based on a 3D pulsating source distribution theory that is exact tor the zero forward speed problem. To include effects of torward speed, a slender body theory based on the quasi two-dimensional approach of Salvesen el al.
Prediction of wave-induced loads on ships: Progress and challenges
Ocean Engineering, 2016
The aim of this paper is to critically assess the methods used for the evaluation of wave-induced loads on ships examining analytical, numerical and experimental approaches. The paper focuses on conventional ocean going vessels and loads originating from steady state and transient excitations, namely slamming, sloshing and green water, for the latter, and including extreme or rogue waves, as well as the more occasional loads following damage. The advantages and disadvantages of the relatively simpler potential flow approaches against the more time consuming CFD methods are discussed with reference to accuracy, modelling nonlinear effects, ease of modelling and of coupling with structural assessment procedures, suitability for long term response prediction and suitability for integration within design and operational decision making. The paper also assesses the uncertainties involved in predicting wave-induced loads and the probabilistic approaches used for the evaluation of long term response and fatigue analysis. The current design practice is reviewed and the role of numerical prediction methods within the classification framework and goal based design approach discussed. Finally the suitability of current developments in prediction methods to meet the needs of the industry and future challenges is assessed.
Procedia Engineering, 2017
Wave wash is a hydrodynamic tool which explains ship generated waves and its impacts on shore and shore erosion. This paper describes that wave wash is an important factor to impose ship speed restriction and selecting speed for any shallow and narrow waterway. Relationships among ship speed, water depth, wave height, time period and wave energy have been established. Speed and depth conditions have been classified into four groups: Sub-Critical (F h < 0.75), Trans-Critical (0.75 < F h < 1.0), Critical (F h = 1.0) and Super-Critical (F h > 1.0). It is focused on waves generated by the ships to observe the maximum permissible speed for a vessel operated in a particular shallow and narrow water way. Empirical Formulae have been employed to find out maximum wave heights in relation with ship generated wave period, speed and other parameters. Maximum theoretical wave heights have been compared with wave wash criteria. These wave heights have also been compared with CFD results from potential flow solver and some commercial software. A case study has been done for a particular shallow and narrow waterway of Bangladesh. A vessel operated in that particular waterway had been selected for observing wave wash phenomena. Comparisons among theoretical results from different empirical equations, CFD results and different speed ranges have been done on which a model has been proposed to determine highest permissible ship speed in a shallow and narrow waterway. When a ship moves around critical speed range, wave wash becomes dominant.
WAVE INDUCED MOTIONS OF MARINE DECK CARGO BARGES, BOSS 1979
The motion responses to environmental forces of a full scale marine deck cargo barge (100mx 30m) have been measured during a tow across the North Sea. Wind and wave measurements were also made, enabling the response spectra and transfer functions presented in this paper to be derived. These results are compared with theoretically predicted values and the importance of roll damping is discussd.
2019
Tim Gourlay, Perth Hydro, Australia Evert Lataire, Maritime Technology Division, Ghent University, Belgium Guillaume Delefortrie, Flanders Hydraulics Research & Maritime Technology Division, Ghent University, Belgium Luca Donatini, Maritime Technology Division, Ghent University, Belgium Manasés Tello Ruiz, Maritime Technology Division, Ghent University, Belgium Daniel Veen, Bentley Systems, Australia Tim Bunnik, Marin, The Netherlands Reint Dallinga, Marin, The Netherlands