Comparison of a New Modified Gummel-Poon Model and VBIC for AlGaAs/GaAs HBTs (original) (raw)
Related papers
Modelling of heterojunction bipolar transistors (HBTs) based on gallium arsenide (GaAs)
International Journal of RF and Microwave Computer-Aided Engineering, 2000
The parameter extraction procedure is discussed in ce c detail. Furthermore, it is demonstrated that the model is fully scalable with respect to emitter area by comparison of simulated and measured S-parameters in the frequency range from DC to 20 GHz. Based on the small signal model, a nonlinear large signal model with the same ⌸-type topology is proposed. It has a small number of parameters and considers self-heating, which is particularly important for HBTs. Parameter extraction is discussed and it is demonstrated by comparison of simulation and measurement that the model can accurately predict the DC characteristics of a HBT for ambient temperatures ranging from 20 to 100ЊC.
Comparison of the new VBIC and conventional Gummel-Poon bipolar transistor models
IEEE Transactions on Electron Devices, 2000
A new bipolar transistor model called VBIC has recently been developed and is likely to replace the Gummel-Poon model as the new industry standard bipolar transistor model. This paper focuses on the comparison of the VBIC and Gummel-Poon models under the dc operations. The extraction and optimization procedure coded in S+ statistical language and required for VBIC simulation is also developed and presented.
A novel method for determining the junction capacitances versus voltage in heterojunction bipolar transistors (HBT's) using s-parameters at microwave frequencies is presented. This new technique has several advantages over traditional approaches, which include: 1) it profiles capacitance at greater forward bias; 2) it enables the direct measurement of minimum geometry transistors; 3) it allows for the accurate extraction of scaled HBT model parameters with emitter length; and 4) it results in improved pad parasitic deembedding for accurate modeling. Both the capacitance-voltage and large-signal HBT model results are shown.
Microwave characterization and modeling of GaAs/AlGaAs heterojunction bipolar transistors
The characterization and modeling of a microwave GaAs/AlGaAs heterojunction Bipolar Transistor (HBT) are discussed. The de-embedded scattering parameters are used to derive a small signal lumped element equivalent circuit model using EEsof's "Touchstone" software package. Each element in the equivalent circuit model is shown to have its origin within the device. The model shows good agreement between the measured and modeled scattering parameters over a wide range of bias currents. Further, the MAG and Ih211 calculated from the measured data and the MAG and Ih211 predicted by the model are also in good agreement. Consequently the model should also be capable of predicting the fmax and f T of other HBTs.
IEEE Transactions on Microwave Theory and Techniques, 1996
In this paper, a new systematic approach to heterojunction bipolar transistors (HBT's) characterization and modeling is presented. The proposed approach is based on a new compact HBT nonlinear circuit model which accounts for both self-heating and the temperature dependence effects. The model's parameters are extracted from measured dc-IV characteristics and S-parameters. The power characteristics of the device are then predicted using the extracted model without any further optimizations. The same model is also used for intermodulation distortion analysis. The model has been implemented in a number of commercial nonlinear simulators and in an in-house computer code. Results are presented for two different size devices showing good agreement with measurements.
An accurate and compact large signal model for III–V HBT devices
Solid-State Electronics, 2005
An accurate and compact large signal model is proposed for modeling heterojunction bipolar transistors (HBTs) based on III-V materials. In DC mode, the model includes self-heating, Kirk and Early effects, as well as the temperature dependence of the model parameters. In small signal mode, the model captures the variation of various AC parameters with bias. The procedure of extracting the model parameters uses DC and multiple bias S-parameter measurements. The model is compiled in the HP-ADS circuit simulator as user-compiled model and is verified by comparing its simulations to measurements in all modes of operation for an AlGaAs/GaAs transistor with an emitter area of 2 · 25 lm 2 .
A user compiled large signal model for GaAs heterojunction bipolar transistors
This paper presents a nonlinear circuit simulation model for III-V Heterojunction Bipolar Transistors (HBTs), implemented using C code in the Agilent ADS circuit simulator as a User Compiled Model (UCM). The UCM is based-on a recently developed compact large-signal model, which includes all physical effects taking place in power III-V based HBT devices. The validity and the accuracy of the UCM are assessed by comparing its simulation results to both measurements and Symbolically Define Device (SDD) simulations in DC, multibias small-signal S-parameters and large-signal microwave power characteristics for a 2x20 m 2 emitter area InGaP/GaAs transistor.
IEEE Transactions on Semiconductor Manufacturing, 2006
A new method for the extraction of the small-signal model parameters of InP-based heterojunction bipolar transistors (HBT) is proposed. The approach is based on the combination of the analytical and optimization technology. The initial values of the parasitic pad capacitances are extracted by using a set of closed-form expressions derived from cutoff mode S-parameters without any test structure, and the intrinsic elements determined by using the analytical method are described as functions of the parasitic elements. An advanced design system is then used to optimize only the parasitic parameters with very small dispersion of initial values. Good agreement is obtained between simulated and measured results for an InP HBT with 5 5 m 2 emitter area over a wide range of bias points up to 40 GHz.
A Gummel–Poon model for pnp heterojunction bipolar transistors with a compositionally graded base
Solid-State Electronics, 2000
A modi®ed Gummel±Poon model has been developed for the pnp heterojunction bipolar transistor which matches thermionic emission±diusion of holes across the emitter±base heterojunction with drift±diusion transport across a graded base. The eects of a high current density on base pushout and the collector junction capacitance have been incorporated to describe the fallo in current gain and high frequency performance. The model's predictions have been compared with reported device measurements and results from a commercial, numerical device simulator for an InPbased device with good agreement found. The model provides an improved description of device performance that will be of use to device designers. Ó
2001
This paper presents a practical method of extracting the bias dependent parameters of the forward transit time Tf, implemented in the VBIC model used on a GaAs HBT. The work should be of great value for the circuit designers, who want to have an easy practical way of including good model parameters from a few simple measurements. This paper includes an evaluation of the implemented bias dependence of Tf in the VBIC model. The VBIC model is extracted from measurements on a GaAs HBT made by Caswell Technology. The model shows good agreement with these measurements.