Electrospun materials from polylactide and Schiff base derivative of Jeffamine ED® and 8-hydroxyquinoline-2-carboxaldehyde and its complex with Cu2+: Preparation, antioxidant and antitumor activities (original) (raw)
Related papers
Biomacromolecules, 2010
Nanofibrous materials containing the antitumor drug doxorubicin hydrochloride (DOX) were easily prepared using a one-step method by electrospinning of DOX/poly(L-lactide-coD ,L-lactide) (coPLA) and DOX/quaternized chitosan (QCh)/coPLA solutions. The pristine and DOX-containing mats were characterized by ATR-FTIR and X-ray photoelectron spectroscopy (XPS). The release rate of DOX from the prepared fibers increased with the increase in DOX content. The DOX release process was diffusion-controlled. MTT cell viability studies revealed that incorporation of DOX and QCh in the nanofibrous mats led to a significant reduction in the HeLa cells viability. It was found, that the antitumor efficacy of the DOX-containing mats at 6 h was higher than that of the free DOX. SEM, TEM, and fluorescence microscopic observations confirmed that the antitumor effect of QCh-based and DOX-containing fibrous mats was mainly due to induction of apoptosis in the HeLa cells.
Polymers
The Schiff base derivative (Ch-8Q) of chitosan (Ch) and 8-hydroxyquinoline-2-carboxaldehyde (8QCHO) was prepared and fibrous mats were obtained by the electrospinning of Ch-8Q/polylactide (PLA) blend solutions in trifluoroacetic acid (TFA). Complexes of the mats were prepared by immersing them in a solution of CuCl2 or FeCl3. Electron paramagnetic resonance (EPR) analysis was performed to examine the complexation of Cu2+(Fe3+) in the Ch-8Q/PLA mats complexes. The morphology of the novel materials and their surface chemical composition were studied by scanning electron microscopy (SEM), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS). The performed microbiological screening demonstrated that in contrast to the neat PLA mats, the Ch-8Q-containing mats and their complexes were able to kill all S. aureus bacteria within 3 h of contact. These fibrous materials had efficiency in suppressing the adhesion of pathogeni...
Materials Science and Engineering: C, 2016
The purpose of this work was to investigate the possibility for the preparation of new poly(3-hydroxybutyrate) (PHB)/poly(ethylene glycol) (PEG)-based fibrous materials containing natural phenolic compound caffeic acid (CA) of diverse architectures, as well as to study the impact of the fiber composition on the in vitro CA release profile and on the biological properties of the fibrous materials. The application of the one-pot electrospinning enabled the fabrication of nanofibrous materials from PHB and PEG loaded with the CA. Materials with targeted design were obtained by coating with polyelectrolyte complex of alginate (Alg) and N,N,N-trimethylchitosan (TMCh). Three different processing paths were used to obtain coated mats: (i) with CA incorporated in the PHB/PEG core; (ii) with CA embedded in the Alg layer; and (iii) with CA included in the TMCh layer. The in vitro release of CA was modulated by controlling the composition and the architecture of the nanofibrous mats. The performed microbiological screening and MTT cell viability studies revealed that in contrast to the bare mats, the CA-containing nanofibrous materials were effective in suppressing the growth of the Grampositive bacteria Staphylococcus aureus and the Gram-negative bacteria Escherichia coli and displayed good cytotoxicity against human cervical HeLa tumor cells. In addition, the proliferation of murine spleen lymphocytes and peritoneal macrophages was increased by the prepared CA-containing nanofibrous materials. The obtained materials are promising for antibacterial wound dressing applications as well as for application in local treatment of cervical tumors.
Polymers
Novel poly(vinyl alcohol) (PVA)/chitosan (Ch)-based fibrous materials containing an ionizable model drug, 8-hydroxyquinoline-5-sulfonic acid (SQ), were successfully fabricated by electrospinning. Complexes between the components of the crosslinked PVA/Ch/SQ mats and Cu2+ and Fe3+ ions were formed. The coordination of these ions in the mats was examined by electron paramagnetic resonance spectroscopy (EPR). The microbiological screening against S. aureus and C. albicans revealed that both the incorporation of SQ in the mats and the complexation with Cu2+ and Fe3+ imparted to these materials antibacterial and antifungal activities. Moreover, the SQ-containing mats and their complexes displayed good cytotoxicity against human cervical HeLa tumor cells. The most prominent was the cytotoxicity of the Cu2+ complex of the mats. The combined antibacterial, antifungal and in vitro antitumor activities render these novel materials promising candidates for wound dressing applications and for a...
Polymers
Novel fibrous materials with diverse biological properties containing a model drug of the 8-hydroxyquinoline group—5-amino-8-hydroxyquinoline (5A8Q)—were fabricated using a one-pot method by electrospinning poly(vinyl alcohol) (PVA)/carboxymethyl cellulose (CMC)/5A8Q solutions. Experiments were performed to prepare Cu2+ (Fe3+) complexes of the crosslinked PVA/CMC/5A8Q materials. The formation of complexes was proven by using scanning electron microscopy (SEM), attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy, energy-dispersive X-ray spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS). The release of 5A8Q and 5A8Q.Cu2+ (Fe3+) was studied and their in vitro release profiles were mostly impacted by the hydrophilic/hydrophobic properties of the materials. The performed microbiological assays revealed that fibrous materials containing 5A8Q and their complexes exhibited good antibacterial and antifungal efficacy. Their activity was stronger against ...
Design of Curcumin-Loaded Electrospun Polyhydroxybutyrate Mat as a Wound Healing Material
Nano Biomedicine and Engineering, 2020
Nanotechnology and tissue engineering have accelerated wound healing. Polyhydroxyalkanoates, with suitable physical, biological and mechanical properties, can be considered as a good candidate in tissue repair and regeneration. In this study, nanofibrous mats of polyhydroxybutyrate (PHB) containing curcumin as a wound healing agent, were designed by electrospinning method. The samples were evaluated by microscopic and mechanical analyses, cell assays and microbial tests. The results of microscopic images showed that the diameter of fibers increased with the increase in the curcumin concentration. The elongation and elasticity modulus of nanofibers increased and decreased respectively, with the increase in the amount of curcumin. Drug release study indicated that increasing the curcumin concentration into nanofibers accelerated rate of drug release. Cytotoxicity results of nanofibrous samples with lower curcumin showed better biocompatibility. The strongest antibacterial activity was shown by the sample with 3% curcumin. In addition, Curcumin-loaded nanofibrous PHB can be potential candidates for wound healing.
Poly(vinyl alcohol) (PVA) is a hydrophilic, biocompatible and nontoxic polymer. However, because of its low water-resistance, some applications for PVA-based materials are limited (e.g., drug delivery systems and wound dressings). In the current work, PVA mats containing tetracycline hydrochloride (TC) were successfully developed by electrospinning. In order to improve the water stability of the systems, the cross-linking of the PVA matrix was induced by citric acid (CA) addition together with heating treatments (150°C or 190°C for 3 min). TC presence led to a strong increase in the electrical conductivity of the blends and as a result, fibers with about 44% lower diameter (270 nm) than that of the corresponding unloaded mats (485 nm) were obtained. Laser scanning confocal microscopy images indicated that TC was well distributed along the PVA nanofibers. The mats were evaluated by FTIR, which revealed chemical interactions between PVA hydroxyl groups and CA carboxylic ones. The treatment at 150°C for 3 min proved to be the more suitable for the preparation of TC-containing mats with improved water resistance, maintaining the TC antimicrobial activity against both Escherichia coli and Staphylococcus aureus almost unaltered. These mats showed a burst release of TC, giving around 95% of the drug within the first hour of immersion in water
Curcumin-PVP Loaded Electrospun Membranes with Conferred Antibacterial and Antitumoral Activities
Fibers and Polymers, 2020
Electrospun membranes containing curcumin were prepared from poly(L-coD ,L-lactic) acid and polyvinylpyrrolidone. The effect of curcumin concentration on the solution viscosity and the morphology of fiber was studied. Curcumin solubility in aqueous solutions was enhanced by the formation of curcumin/polyvinylpyrrolidone watersoluble complex. Curcumin physico-chemical and therapeutic properties within the membranes were preserved upon UV-Vis light irradiation, as a part of the membranes sterilization. The biomaterials showed antibacterial activity against pathogenic microorganisms such as Staphylococcus aureus and Candida albicans. In-vitro experiments against HeLa and Graffi tumor cells and white blood cells (peritoneal macrophages and spleen lymphocytes) revealed potential biomedical application of the membranes.
Silk nano-discs: A natural material for cancer therapy
Biopolymers, 2018
The article demonstrates the crystalline silk nano-discs (CSNs), with well-controlled morphology, which upon magnetization, yields magnetic crystalline silk nano-discs, making both prominent alternatives for replacing metal templates such as gold, silver, and so on in therapeutics and implants. The isolated β-sheet-rich discotic CSNs have~50 nm diameter, high crystallinity (> 90%), and are insoluble but provide good dispersibility and stability in aqueous solutions. The melt blending-cum-electrospinning of functionalized CSN with poly(lactic acid) results in biocompatible nanofiber-based scaffolds having in vitro cell cytocompatibility with improved cell adhesion and proliferation. The assessment of release behavior of curcumin, a naturally occurring anticancer drug, shows sustained release over 25 days exhibiting effective cytotoxicity against human cervical cancer cells. Further, combined effect of curcumin and hyperthermia reduced the cell growth by~63%. Alignment of CSN-derived magnetic nanoparticles due to effective fiber drawing process during electrospinning could improve cytocompatibility against BHK-21 cells, and therefore efficacy for cancer therapy.