Analisis Stabilitas Lereng Pada Pelapukan Batuan Vulkanik Dicikalongwetan Kabupaten Bandung Barat (original) (raw)

2020, Jurnal Geografi Gea

The purpose of this investigation is to determine the value of the slope safety factor (Fs) in weathering volcanic rocks and provide technical recommendations in efforts to prevent and prevent soil movement. The method of investigation is carried out by means of field investigations, testing of soil mechanics laboratory, literature study to obtain information / data on soil movements and observations of soil movements in the area of investigation. The slope stability analysis was calculated using the Slope/w program from Geostudio 2007 software. The results of slope stability analysis at 3 locations with different slope, showed that location 1 slope 35º and location 2 slope 65º under wet or saturated soil conditions obtained Safety Factor (Fs) location 1 with a value of 0.626 and location 2 value, 0.367 less than 1.25 means that the slope is normal / frequent ground motion or unstable slopes, but different at location 3 with a slope of 25º obtained a Safety Factor (Fs) of 1.430 which means that more than 1.25 the ground movement is rarely stable or the slope is stable. Whereas in dry / unsaturated soil conditions, locations 1 and 2 obtained a Safety Factor value (Fs) of 0.680 location 1 and location 2 obtained with a value of 0.404 which means less than 1.07 slopes remained unstable, but location 3 on dry soil conditions Safety Factor (Fs) 1,450 over 1.25 means that the slope is stable.

Sign up for access to the world's latest research.

checkGet notified about relevant papers

checkSave papers to use in your research

checkJoin the discussion with peers

checkTrack your impact