Estimation of filament temperature and adhesion development in fused deposition techniques (original) (raw)
Stimation of Filament Temperature and Adhesion Development in Used Deposition Techniques
José Covas
2017
View PDFchevron_right
The Effect of a Phase Change on the Temperature Evolution during the Deposition Stage in Fused Filament Fabrication
Fernando Duarte
Computers
View PDFchevron_right
In-Process Monitoring of Temperature Evolution during Fused Filament Fabrication: A Journey from Numerical to Experimental Approaches
Sofiane KHELLADI
Thermo
View PDFchevron_right
Effect of the printing bed temperature on the adhesion of parts produced by fused filament fabrication
Clemens Holzer
Plastics, Rubber and Composites
View PDFchevron_right
Thermal analysis of the fused filament fabrication printing process: Experimental and numerical investigations
Franck Pigeonneau
International Journal of Material Forming, 2020
View PDFchevron_right
Studying the cooling stage in fused filament fabrication
Fernando Duarte
Universidade do Minho eBooks, 2020
View PDFchevron_right
A Review on Composite Filaments for Fused Deposition Modeling Process
IRJET Journal
IRJET, 2022
View PDFchevron_right
Modeling of Bond Formation Between Polymer Filaments in the Fused Deposition Modeling Process
Peihua Gu
Journal of Manufacturing Processes, 2004
View PDFchevron_right
Numerical investigation of the influence of process conditions on the temperature variation in fused deposition modeling
Talash Malek
Materials & Design, 2017
View PDFchevron_right
Improved print quality in fused filament fabrication through localized dispensing of hot air around the deposited filament
Momen Qasaimeh
Additive manufacturing, 2021
View PDFchevron_right
Fully Resolved Numerical Simulations of Fused Deposition Modeling. Part II-Solidification, Residual Stresses, and Modeling of the Nozzle
Grétar Tryggvason
arXiv (Cornell University), 2017
View PDFchevron_right
Temperature Analyses in Fused Filament Fabrication: From Filament Entering the Hot-End to the Printed Parts
Frederik Vogeler
3D Printing and Additive Manufacturing, 2021
View PDFchevron_right
Fully resolved numerical simulations of fused deposition modeling. Part I: fluid flow
Grétar Tryggvason
Rapid Prototyping Journal, 2018
View PDFchevron_right
Toward the understanding of temperature effect on bonding strength, dimensions and geometry of 3D-printed parts
Sofiane KHELLADI
Journal of Materials Science, 2020
View PDFchevron_right
Investigation of Layer-Based Thermal Behavior in Fused Deposition Modeling Process by Infrared Thermography
Ehsan Malekipour
46th SME North American Manufacturing Research Conference, 2018
View PDFchevron_right
Testing and simulation of thermal and mechanical properties of additively manufactured parts using fused deposition modelling (FDM)
Alexandria Marchi
OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information), 2018
View PDFchevron_right
Hybrid heating in Fused Filament Fabrication process
Sorin Savu
Research Square (Research Square), 2024
View PDFchevron_right
Assessment of Crystallinity Development during Fused Filament Fabrication through Fast Scanning Chip Calorimetry
Wim Zoetelief
Applied Sciences
View PDFchevron_right
Thermal Management of Nozzle of Fused Deposition Application: A Review
Dixit Rathod
2015
View PDFchevron_right
Thermo-mechanical Characterization of Metal/Polymer Composite Filaments and Printing Parameter Study for Fused Deposition Modeling in the 3D Printing Process
Edgar Reyes Junior
Journal of Electronic Materials, 2014
View PDFchevron_right
Fused Filament Deposition of PLA: The Role of Interlayer Adhesion in the Mechanical Performances
Sara Liparoti
Polymers
View PDFchevron_right
Process and material behavior modeling for a new design of micro-additive fused deposition
Antonio Rincón Benitez
The International Journal of Advanced Manufacturing Technology, 2013
View PDFchevron_right
A review on the fused deposition modeling (FDM) 3D printing: Filament processing, materials, and printing parameters
Fitrian Imaduddin
Open Engineering
View PDFchevron_right
A critical review on the fused deposition modeling of thermoplastic polymer composites
JOSE SANTO
Composites Part B: Engineering, 2020
View PDFchevron_right
Temperature Mapping of 3D Printed Polymer Plates: Experimental and Numerical Study
Dimitrios Karalekas
Sensors, 2017
View PDFchevron_right
A numerical study of the effect of viscoelastic stresses in fused filament fabrication
Grétar Tryggvason
Computer Methods in Applied Mechanics and Engineering, 2019
View PDFchevron_right
The Effect of Deposition Conditions on Adhesion Strength of Ti and Ti6Al4V Cold Spray Splats
Jeangabriel Legoux
Journal of Thermal Spray Technology, 2012
View PDFchevron_right
Experimental study of PLA thermal behavior during fused filament fabrication
Fernando Duarte
Journal of Applied Polymer Science, 2020
View PDFchevron_right
A study on extruded filament bonding in fused filament fabrication
O. Carneiro
Rapid Prototyping Journal, 2018
View PDFchevron_right
Simulations of fused filament fabrication using a front tracking method
Grétar Tryggvason
International Journal of Heat and Mass Transfer, 2019
View PDFchevron_right
Analysis on fused deposition modelling performance
Nur Saaidah
Journal of Zhejiang University Science, 2010
View PDFchevron_right
Sensing In-Situ Temperatures by Coordinates in Fused Filament Fabrication for Identifying Interlayer Anisotropic Mechanical Properties and Enabling Post-Fem Analysis
Ole S. Nesheim
Proceedings of the Design Society, 2023
View PDFchevron_right
Geometrical and mechanical performance of multi-material fused deposition modelling
Yudan Whulanza
IOP Conference Series: Materials Science and Engineering, 2019
View PDFchevron_right
Fused Deposition Modelling
Vibhor Aggarwal
View PDFchevron_right