Analysis of a micro-cogeneration system using hybrid solar/gas collectors (original) (raw)
Related papers
Evaluation of a Hybrid Solar/Gas Combined Heat and Power Small System
The use of solar thermal collectors for electricity production is a way to contribute to the Portuguese objective of reaching 39% of electricity production from renewable energy sources, until 2010. This is also in accordance with the objectives of the European Union and the Kyoto Protocol.
Preliminary thermal analysis of a solar assisted micro- cogeneration system
In this work, three solar assisted thermodynamic cycles for a microcogeneration system are studied. The thermodynamic cycles are based on the organic Rankine cycle (ORC) and the operating temperatures of solar thermal collectors are 80ºC, 100ºC-150ºC and 200º-250ºC, for cycles 1, 2 and 3, respectively. Several researchers have investigated the application and performance of ORCs. They have shown that organic fluids can be used to generate power using low-temperature energy sources (solar or waste heat). The main work objective is the modelling of the selected cycles for optimisation according to the temperature range.
Microcogeneration with Stirling Engine and Solar Power: Energetic Balance in Mediterranean Climate
Journal of Energy and Power Engineering
This paper analyzes the viability of a new microcogeneration system with a Stirling engine micro-CHP (combined heat and power) and renewable solar energy: thermal and photovoltaic system, using accumulation system for hot water and ion lithium batteries for electricity. A weather station gives real meteorological parameters for Mediterranean climate (Málaga, Spain). A control unit permits to have a full automated system, which works according to a flowchart. This controller also allows theorizing a demand profile curve of daily consumption, typical for this or other climates. Many studies analyse different kinds of combined systems by simulating or making the real installation to obtain results for either microcogeneration or solar power, but not together, e.g. central heating applications to obtain a constant consumption of hot water. This new system shows a new combination of resources (natural gas in Stirling and solar energy systems), and the implementation allows doing experiments with different profiles of consumption to have real, non-theoretical, results. The control system is self-governing: it connects the different supplies of energy (solar thermal, photovoltaic, Stirling or batteries) depending on the demand, this demand can be changed by simulating any profile: domestic (heat and power), business, low thermal demand, low electricity demand, etc.
Environments
In this paper, the smart management of buildings energy use by means of an innovative renewable micro-cogeneration system is investigated. The system consists of a concentrated linear Fresnel reflectors solar field coupled with a phase change material thermal energy storage tank and a 2 kWe/18 kWth organic Rankine cycle (ORC) system. The microsolar ORC was designed to supply both electricity and thermal energy demand to residential dwellings to reduce their primary energy use. In this analysis, the achievable energy and operational cost savings through the proposed plant with respect to traditional technologies (i.e., condensing boilers and electricity grid) were assessed by means of simulations. The influence of the climate and latitude of the installation was taken into account to assess the performance and the potential of such system across Europe and specifically in Spain, Italy, France, Germany, U.K., and Sweden. Results show that the proposed plant can satisfy about 80% of th...
Applied Energy, 2016
The aim of this paper is to assess the performance of several designs of hybrid systems composed of solar thermal collectors, photovoltaic panels and natural gas Internal Combustion Engines. The software TRNSYS 17 has been used to perform all the calculations and data processing, as well as an optimisation of the tank volumes through an add-in coupled with the GENOPT® software. The study is carried out by analysing the behaviour of the designed systems and the conventional case in five different locations of Spain with diverse climatic characteristics, evaluating the same building in all cases. Regulators, manufacturers and energy service engineers are the most interested in these results. Two major contributions in this paper are the calculations of primary energy consumption and emissions and the inclusion of a Life Cycle Cost analysis. A table which shows the order of preference regarding those criteria for each considered case study is also included. This was fulfilled in the interest of comparing between the different configurations and climatic zones so as to obtain conclusions on each of them. The study also illustrates a sensibility analysis regarding energy prices. Finally, the exhaustive literature review, the novel electricity consumption profile of the building and the illustration of the influence of the cogeneration engine working hours are also valuable outputs of this paper, developed in order to address the knowledge gap and the ongoing challenges in the field of distributed generation.
Energies
With the increase in oil prices, developing nations end up paying expensive electricity and heating bill. This leading study investigates the experimental development of a new energy-saving system by integrating a solar water heater and solar cooling absorption cycle with a conventional boiler for domestic hot water and heating purposes. The heating and cooling load calculations for space heating of the building were calculated using TRNSYS 14.1 computer software and the results were used in calculating the energy-saving value. A 65 flat plate solar collector-chiller system with a total surface area of 130 m2 was integrated with the boiler and used to supply heating and cooling for a three-story building (1500 m2) in Al Bayt University, Jordan. The integrated system helped to save energy, reduced the emission of CO2 into the atmosphere, supplied hot water, and space heating/cooling requirements to the building year-round, and reduced the overall energy cost of heating and cooling by...
Volume 1: Fuels, Combustion, and Material Handling; Combustion Turbines Combined Cycles; Boilers and Heat Recovery Steam Generators; Virtual Plant and Cyber-Physical Systems; Plant Development and Construction; Renewable Energy Systems, 2018
The small solar thermal power plant is being developed with funding from EU Horizon 2020 Program. The plant is configured around a 2-kWel Organic Rankine Cycle turbine and solar field, made of Fresnel mirrors. The solar field is used to heat thermal oil to the temperature of about 240 o C. This thermal energy is used to run the Organic Rankine Cycle turbine and the heat rejected in its condenser (about 18-kWth) is utilized for hot water production and living space heating. The plant is equipped with a latent heat thermal storage to extend its operation by about 4 hours during the evening building occupancy period. The phase change material used is Solar salt with the melting/solidification point at about 220 o C. The total mass of the PCM is about 3,800 kg and the thermal storage capacity is about 100 kWh. The operation of the plant is monitored by a central controller unit. The main components of the plant are being manufactured and laboratory tested with the aim to assemble the plant at the demonstration site, located in Catalonia, Spain. At the first stage of investigations the ORC turbine will be directly integrated with the solar filed to evaluate their joint performance. During the second stage of tests, the Latent Heat Thermal Storage will be incorporated into the plant and its performance during the charging and discharging processes will be investigated. It is planned that the continuous filed tests of the whole plant will be performed during the 2018-2019 period.
Comparison between a solar system and a fuel boiler for greenhouse air-conditioning
Desalination, 2004
The object of this study was to compare economically a solar system for greenhouse conditioning in order to maintain the greenhouse air temperature at 12°C at night during the coldest months with a conventional heating system. The solar system consists of a polypropylene capillary heat exchanger; it also has two batteries of plaits respectively suspended in the air and buried into the ground of the greenhouse. During the day, the air-suspended exchangers recover solar energy in excess of the needs of the plants. This recovered energy is then stored into the greenhouse ground through the buried exchangers. At night the stored thermal energy is brought back by the suspended exchangers to heat the greenhouse air. The conventional heating system used in this comparative study is a 15 kW fuel boiler. The results show that the solar system was less powerful than the conventional system during some days of December and January. However, during the other months, it allowed better comfort in the greenhouse. It heats during the night and especially avoids overheating during the day that is very unfavourable to plant growth. Finally, the solar system gave an annual profit of fossil energy of 360 kWh.m !2 for the greenhouse. In Tunisia, there are 1400 hectares of greenhouses, and this system can provide energy savings of 5×10 9 kWh/y.
2019
This paper proposes the configuration of an Organic Rankine Cycle (ORC) coupled to a 13 solar domestic hot water system (SDHWS), with the purpose of analyzing the cogeneration 14 capacity of the system. A simulation of the SDHWS was conducted at different temperatures, 15 observing its performance to determine the amounts of useable heat generated by the solar 16 collector; thus, from an energy balance, the amount of heat that may be used by the ORC could be 17 determined. The working fluid that would be suitable for the temperatures and pressures given in 18 the system were selected. The best fluid for the given conditions of superheated vapor at 120 °C 19 and 604 kPa and a condensation temperature of 60 °C and 115 kPa was acetone. The main 20 parameters for the expander thermodynamic design that may be used in such ORC were obtained 21 with the possibility of generating 443 kWh of annual electric energy, with 6.65 % global efficiency 22 of solar to electric power, or an overall ef...
Energies
This paper performs technical, economic and environmental feasibility analyses of two different solar cogeneration plants, consisting of a solar system (a parabolic trough collector field coupled with thermal energy storage), an Organic Rankine Cycle (ORC), and mechanical chillers, that should cover the electrical and cooling demands of a commercial center located in Zaragoza (Spain). System A is hybridized with an auxiliary biomass boiler that complements the solar system’s thermal production, providing a constant heat supply to the ORC, which operates at full load during the operating hours of the solar system. In contrast, system B is not hybridized with biomass, so the ORC is fully driven by the solar system, operating at partial load according to the solar resource availability. Both systems are connected to the electrical grid, allowing electricity purchases and sales when needed. The design procedure involves the sizing of the equipment as well as the modelling of the hourly ...