Internal Dose Analysis for Radiation Worker in Cancer Therapy Based on Boron Neutron Capture Therapy with Neutron Source Cyclotron 30 MeV Using Monte Carlo N Particle Extended Simulator (original) (raw)
Related papers
Indonesian Journal of Physics and Nuclear Applications, 2019
Based Studies were carried out to analyze the internal dose of radiation for workers at Boron Neutron Capture Therapy (BNCT) facility base on Cyclotron 30 MeV with BSA and a room that was actually designed before. This internal dose analyzation included interaction between neutrons and air. The air contained N2 (72%), O2 (20%), Ar (0.93%), CO2, Neon, Kripton, Xenon, Helium and Methane. That internal dose to the worker should be below the dose limit for radiation workers which is an amount of 20 mSv/years. From the particles that are present in the air, only Nitrogen and Argon can change into radioactive element. Nitrogen-14 activated to Carbon-14, Nitrogen-15 activated to Nitrogen-16, and Argon-40 activated to Argon-41. Calculation using tally facility in Monte Carlo N Particle version Extended (MCNPX) program for calculated Neutron flux in the air 3.16x107 Neutron/cm2s. The room design in the cancer facility has a measurement of 200 cm in length, 200 cm in width, and 166.40 cm in h...
2016
A dosimetry study of in vitro and in vivo trials system in thermal column of Kartini Reactor for Boron Neutron Capture Therapy (BNCT) facility has been conducted by using the Monte Carlo N-Particle Extended (MCNPX) software. Source of neutron originated from the 100 kW reactor which has been modified by the previous researcher. Models have been made by using simple geometries to represent tissues. Models of in vitro have been made by 4 spheres each has 1 cm diameter to represent tumour, whereas in vivo by 4 cylinders each has 6 cm length, 3 cm diameter, and breast soft tissue material with 1 cm sphere each located in the center of the cylinders to represent models of mouse with tumour. An increase in value of the boron concentration will increase the value of dose rate as well, then the exposure time should be shorter. The exposure times (in minutes) of in vitro trials for 20, 25, 30, 50, 75, 100, 125, and 150 μg boron/g tissues are 117.77, 117.77, 117.07, 115.69, 114.02, 112.39, 11...
Indonesian Journal of Physics and Nuclear Applications, 2018
Boron Neutron Capture Therapy (BNCT) on radial piercing beam port Kartini nuclear reactor by MCNPX simulation method has been done in the National Nuclear Energy Agency Yogyakarta. BNCT is a type of therapy alternative that uses nuclear reaction 10 B (n, α) 7 Li to produce 2.79 MeV total kinetic energy. To be eligible IAEA conducted a study of design improvements and variations on some parameters to optimum condition which are Ni-nat thickness of 1.75 cm as collimator wall, Al 2 S 3 as thick as 29 cm as moderator, Al 2 O 3 0.5 cm thick as filter, Pb and Bi thickness of 4 cm as the end of the gamma shield collimators and Bi thickness of 1.5 cm as the base gamma shield collimators. The total dose was accepted in the tumor tissue 900 × 10-4 Gy/s. Radiation dose on the tumor tissue is 50±3 Gy with time irradiation of 9 minutes and 10 seconds. That dose was given into skin tissue and healthy liver tissue consecutively (6.00±0.05) × 10-2 Gy and (10.00±0.05) × 10-2 Gy. It shows the dose received by healthy tissue is still within safe limits.
JURNAL TEKNOLOGI REAKTOR NUKLIR TRI DASA MEGA
A study to optimize a model of neutron radiation shielding for BNCT facility in the irradiation room has been performed. The collimator used in this study is a predesigned collimator from earlier studies. The model includes the selection of the materials and the thickness of materials used for radiation shield. The radiation shield is required to absorb leaking radiation in order to protect workers at the threshold dose of 20 mSv/year. The considered materials were barite concrete, paraffin, stainless steel 304 and lead. The leaking neutron radiation dose rates have been determined using Monte Carlo N Particle Version Extended (MCNPX) with a radiation dose limit rate that is less than 10 µSv/hour. This dose limit is in accordance with BAPETEN regulation related the threshold dose for workers, in which the working duration is 8 hours per day and 5 days per week. It is recommended that the best model for the irradiation room has a dimension 30 cm width, 30 cm length, 30 cm height and ...
ASEAN Journal on Science and Technology for Development
Cancer is one of the leading causes of death globally, with lung cancer being among the most prevalent. Boron Neutron Capture Therapy (BNCT) is a cancer therapy method that uses the interaction between thermal neutrons and boron-10 which produces a decaying boron-11 particle and emits alpha, lithium 7 and gamma particles. A study was carried out to model an in vivo experiment of rat organisms that have lung cancer. Dimensions of a rat’s body were used in Konijnenberg research. Modeling lung cancer type, non-small cell lung cancer, was used in Monte Carlo N Particle-X. Lung cancer was modeled with a spherical geometry consisting of 3 dimensions: PTV, GTV, and CTV. In this case, the neutron source was from the radial piercing beam port of Kartini Reactor, Yogyakarta. The variation of boron concentration was 20, 25, 30, 35, 40, and 40 µg/g cancer. The output of the MCNP calculation was neutron scattering dose, gamma-ray dose and neutron flux from the reactor. A neutron flux was used to...
Dose Analysis of In Vitro and In Vivo Test for Boron Neutron Capture Therapy (BNCT)
ASEAN Journal on Science and Technology for Development, 2018
The purpose of this study was to determine the in vitro and in vivo doses of boron neutron capture cancer therapy (BNCT) using the SHIELD-HIT12A program. To be able to determine the recoil energy, the research was conducted using the Monte Carlo method. Running data obtained the value of ionization activity and recoil lost. The results showed that in vitro and in vivo doses of BNCT for soft tissue irradiation had a value of 0.312 × 10-2 Sv, which is safe and does not harm healthy body tissue around the cancer cells because it is below the threshold of 1.5 Rem or 15 × 10-3 Sv, in accordance with the provisions of the upper value permitted by the International Commission on Radiation Protection in 1966. While the comparative targets are water, the optimal target absorption dose was obtained at concentrations of 3.232 × 10-3 Gy. The dose of carbon equivalent in water with the type of thermal neutron radiation was 16.16 × 10-3 Sv; this dose is classified as unsafe.
Monte Carlo study of neutron-ambient dose equivalent to patient in treatment room
Applied Radiation and Isotopes, 2016
This paper presents an analytical method for the calculation of the neutron ambient dose equivalent H* (10) regarding patients, whereby the different concrete types that are used in the surrounding walls of the treatment room are considered. This work has been performed according to a detailed simulation of the Varian 2300C/D linear accelerator head that is operated at 18 MV, and silver activation counter as a neutron detector, for which the Monte Carlo MCNPX 2.6 code is used, with and without the treatment room walls. The results show that, when compared to the neutrons that leak from the LINAC, both the scattered and thermal neutrons are the major factors that comprise the out-of field neutron dose. The scattering factors for the limonite-steel, magnetite-steel, and ordinary concretes have been calculated as 0.91 ± 0.09, 1.08 ± 0.10, and 0.371 ± 0.01, respectively, while the corresponding thermal factors are 34.22 ± 3.84, 23.44 ± 1.62, and 52.28 ± 1.99, respectively (both the scattering and thermal factors are for the isocenter region); moreover, the treatment room is composed of magnetite-steel and limonite-steel concretes, so the neutron doses to the patient are 1.79 times and 1.62 times greater than that from an ordinary concrete composition. The results also confirm that the scattering and thermal factors do not depend on the details of the chosen linear accelerator head model. It is anticipated that the results of the present work will be of great interest to the manufacturers of medical linear accelerators.
Dosimetry and dose planning in boron neutron capture therapy : Monte Carlo studies
2012
Boron neutron capture therapy (BNCT) is a biologically targeted radiotherapy modality. So far, 249 cancer patients have received BNCT at the Finnish Research Reactor 1 (FiR 1) in Finland. The effectiveness and safety of radiotherapy are dependent on the radiation dose delivered to the tumor and healthy tissues, and on the accuracy of the doses. At FiR 1, patient dose calculations are performed with the Monte Carlo (MC) -based treatmentplanning system (TPS), Simulation Environment for Radiotherapy Applications (SERA). Initially, BNCT was applied to head and neck cancer, brain tumors, and malignant melanoma. To evaluate the applicability of the new target tumors for BNCT, calculation dosimetry studies are needed. So far, clinical BNCT has been performed with the neutrons from a nuclear reactor, while an accelerator based neutron sources applicable for hospital operation would be preferable. In this thesis, BNCT patient dose calculation practice in Finland was evaluated against referen...