The evaluation of the elasto-plastic behavior in case of the honed steel pipes subjected to variable internal pressure (original) (raw)

IOP Conference Series: Materials Science and Engineering, 2016

Abstract

The paper analyses the elasto-plastic behavior of ten samples of E355 steel pipe of the same inner diameter, but with wall thickness ranging between 1.100 and 2.500 mm and length about 100 mm. The samples were subjected to variable internal pressure which was increased from 0 to 600-800 bar (up to the breaking of the pipe), being used the hydraulic oil, type HM46. The outer diameter of the tested pipes was measured successive for each increase of pressure with 100 bars, thus being determined the flow curve of the pipe material characterized by the elasto-plastic behavior and a tenacious failure. It was found that thin pipes, with the ratio between the inner and outer diameter less than 1.1, shows a different flow curve compare to pipes with thick walls, having the ratio between the inner and outer diameter greater than 1.1, the deformations being about two times higher. The rheological models of each type of pipes were identified.

Rozina Steigmann hasn't uploaded this paper.

Let Rozina know you want this paper to be uploaded.

Ask for this paper to be uploaded.