Evaluation of SLS-made PA 12 Under Uniaxial Tensile Test (original) (raw)
Related papers
Evolution of Aerospace Materials: A Review
IRJET, 2022
The choice of materials used to construct an aircraft is of paramount importance due to several factors, such as safety, structural integrity and weight optimization. In this article, the evolution of materials that are particularly used in the aerospace industry since the beginning of last century is reported. This report will review the different materials that have been used in the aerospace industry since its inception. They include, but are not limited to, metals, plastics, composites, ceramics and glasses. With the development of new materials technology, aerospace engineering has quickly become one of the fastest growing industries and it is only set to continue to grow exponentially with innovations like 3D printing and nanotechnology. Alongside other industries like automobile engineering and locomotive manufacturing, aerospace engineering has benefited from such developments which have also helped increase space travel. Research is being conducted on materials that are designed to have excellent properties, including high strength/weight ratio, easy manufacturability, and corrosion and heat resistance. These materials would be suitable for aircrafts and offer a variety of benefits.
Correlation of Process Parameters with Mechanical Properties of Laser Sintered PA12 Parts
Advances in Materials Science and Engineering
Selective laser sintering (SLS) is an additive manufacturing technique that enables the production of customized, complex products. SLS has proven itself a viable prototyping tool and production method for noncritical products. The industry has picked up on the potential of SLS, which raised the question whether it is possible to produce functional products with reproducible mechanical properties for application in critical sectors. Properties of SLS parts highly depend on the applied process settings. Hence, present work examined the influence of key process parameters (preheating temperature, laser power, scan spacing, scan speed, layer thickness, and part build orientation) on the properties (tensile strength, tensile modulus, elongation at break, and part density) of SLS produced parts. A design of experiments (DoE) approach was used to plan the experiments. Test samples according to DIN EN ISO 527-2 were produced on a sintering system (EOSINT P395) using polyamide 12 powder (EO...
Polymers
Poly(dodecano-12-lactam) (commercially known as polyamide “PA12”) is one of the most resourceful materials used in the selective laser sintering (SLS) process due to its chemical and physical properties. The present work examined the influence of two SLS parameters, namely, laser power and hatch orientation, on the tensile, structural, thermal, and morphological properties of the fabricated PA12 parts. The main objective was to evaluate the suitable laser power and hatching orientation with respect to obtaining better final properties. PA12 powders and SLS-printed parts were assessed through their particle size distributions, X-ray diffraction (XRD), Fourier Transform Infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), a scanning electron microscope (SEM), and their tensile properties. The results showed that the significant impact of the laser power while hatching is almost unnoticeable when using a high laser power. A more significant condition of the mechanical...
Optics and Laser Technology, 2017
The mechanical and microstructural investigation of polymer parts (polyamide 12) fabricated by Selective Laser Sintering as part of a Round Robin initiative is presented. The paper focuses on the microstructural analysis of the Round Robin samples and their evaluation regarding their effect on mechanical properties with respect to each other. Therefore optical microscopy on microtomed samples, X-ray computed tomography and Differential Scanning Calorimetry is used to determine the morphology of residual particle cores and of internal pores. The mechanical tensile testing revealed a high variability of the ductility of the samples among the used machines and a distinctive anisotropic mechanical response. Especially the quite brittle characteristic along the building direction has shown to be still a crucial challenge for the process. However, one machine delivered samples with outstanding ductility with total elongation values of about 21% along the building direction and of about 32% planar to the layer. This result was back traced to a distinctive pore and residual particle morphology which is characterized by low pore concentration, the absence of coplanar pore or residual particle arrangements and the highest degree of particle melting measured. Furthermore, the analysis depicts that both features, pores and residual particles, contribute to the mechanical properties significantly and that they are not necessarily linked since they can vary independently in a certain range depending on the machine configuration.
Mechanical behavior of PA12 lattice structures produced by SLS
2021
Dissertação de mestrado integrado em Engenharia de PolímerosTaking into account the rapid technological evolution and the growing demand, for the industrial sector to meet the most diverse needs of the market, Additive Manufacturing (AM) technology appears as a transformative approach to industrial production that enables the creation of lighter, stronger parts and systems. The versatility of this type of technology allows a reduction in production time and energy consumption, as well as, reducing material waste in the production of a product. It is in this last point that the technologies of AM stand out when comparing to the technologies of conventional manufacture. In AM technologies, it is possible to carry out the deposition of material in a controlled manner, where it is really necessary and, at the same time, ensure the necessary mechanical properties to meet the product requirements. Due to its versatility and rapid technological advances, it has become possible to implement...
The International Journal of Advanced Manufacturing Technology, 2023
Polymer products manufactured by additive processes are today increasingly flooding the market. Given that they have broad application ranging from various consumer products to medicine and automotive industry, the products must satisfy certain mechanical properties. In the past studies of selective laser sintering (SLS) for polymer materials, the processing parameter of energy density has been confirmed which affects the tensile properties. Energy density depends on the laser beam speed, laser power and hatch distance; however, in this paper the existing mathematical model has been expanded by the overlay ratio and tests have been conducted how on the basis of the new mathematical model a product with good tensile properties (tensile strength, tensile strength at break, tensile modulus, tensile strain at break) can be manufactured. However, in parameter selection as well, the layer thickness and the manufacturing strategy also play a role, and they may shorten the time and reduce the cost necessary to manufacture a new product from the initial concept to production. The paper also provides a proposal of processing parameters (laser beam speed, laser power and energy density) depending on the manufacturing strategy and layer thickness.
A Review of Properties of Advanced Aerospace Materials
The use of advanced materials has always been a key element in the success of aerospace industry. Aerospace components should have damage tolerance characteristics with high resistance under both static and dynamic loads. To meet the specific requirements, new materials have been necessary to improve and advance aviation. This improvement will come from advances in synthesis/processing of materials. These advanced alloys are more demanding in terms of machinability as their structure and material properties are focused on improved resistance to dwell crack growth, environmental damage and creep strain, as well as higher levels of microstructure stability and high temperature yield stress. Modern machine tools with advanced machining processes are key enablers to achieve overall quality and productivity goals to meet future market requirements. In this paper, properties of advanced materials in general are discussed; specifically advanced materials in aerospace applications.
Modeling of hyperelasticity in polyamide 12 produced by selective laser sintering
Continuum Mechanics and Thermodynamics
Polyamide 12 (PA12) is a core material in many 3D-printing techniques, including selective laser sintering (SLS), and its mechanical characterization helps to better understand behaviors of additively manufactured parts made from this polymer. In this paper, the elastic response of SLS-produced PA12 is shown to be nonlinear. Standard test samples with different orientations with regard to the scanning direction are 3D-printed with the use of PA2200 powder, and their elastic response is investigated under uniaxial tension at different strain rates. Mooney–Rivlin hyperelastic models are proposed to address the observed nonlinear elasticity of the samples. Cyclic response of the specimens is shown to be stabilized after a few transient cycles so the material parameters are determined for trained samples after shakedown in their response. The obtained parameters are found to depend on the loading speed; thus, a rate-dependent hyperelastic constitutive model is presented for PA12 produce...
Journal of Manufacturing Processes, 2019
This study is dedicated to comparing the processes of selective laser sintering (SLS) and multi jet fusion (MJF), and evaluates the morphologies, thermal and mechanical properties of the polyamide 12 (PA12) parts fabricated by these two technologies. The results showed that the PA12 powders used by these two technologies both had approximately elliptical shapes, similar particle sizes, distributions and sintering windows. For the printed parts, the surface roughness of the MJF where detailing agent was applied on was significantly better than the roughness of SLS parts. During the processing, with the powerful instant heating capability of laser, the degree of particle melting in SLS was higher than that of MJF. The mechanical properties of the MJF parts was relatively lower than that of SLS, which could be explained by the lower density of the MJF parts. However, the printing speed of MJF was almost 10 times than that of SLS's by the reason of different processing principles.
In Situ WAXD and SAXS during Tensile Deformation Of Moulded and Sintered Polyamide 12
Polymers
To provide knowledge to improve the mechanical performance of Polyamide 12 (PA12) sintered products, we have studied experimentally the mechanical response and structure development under constant strain rate of compression moulded and laser sintered PA12 by means of in situ small-angle X-ray scattering (SAXS) and wide-angle X-ray diffraction (WAXD) experiments. It is found that at low temperatures, i.e., below the glass transition temperature, the brittle failure of laser sintered samples is determined by the fast formation of voids that originate at the beginning of the macroscopic plastic deformation. This effect appears to be faster at temperatures below room temperature and it is less effective at higher temperatures. When tested at 120 ∘ C, sintered PA12 shows a better mechanical response in terms of yield stress and a comparable strain at break with respect to moulded PA12. This can be explained by considering that sintered samples have slightly thicker crystals that can sust...