Efficient Production of Phosphorene Nanosheets via Shear Stress Mediated Exfoliation for Low‐Temperature Perovskite Solar Cells (original) (raw)
Related papers
Black phosphorus (BP) has recently attracted intense research interest due to its unique thickness-dependent and anisotropic electronic and photonic properties, and has shown promising potential in nanophotonic, nanoelectronics and energy storage applications. However, the application of BP in practical devices is hindered by its high commercial cost. To further reduce the cost and accelerate the development of BP, a highly efficient preparation strategy for low-cost BP must be found. Herein, we report such a method via a modified chemical vapor transport (CVT) method by replacing high-purity red phosphorus (RP) with a low-purity precursor counterpart. We show that this method can drastically reduce the cost of manufacturing by several orders of magnitude. Furthermore, the BP produced using low-cost RP shows nearly the same crystal quality, high purity, local chemical structure, and electronic properties, compared with those of the high-cost BP prepared by the traditional CVT method. Most importantly, exfoliated phosphorene nanosheets prepared from the low-cost BP exhibit promising hydrogen evolution reaction (HER) activity. Owing to the high quality and high conversion efficiency, the low-cost BP holds promising potential in future scientific research and industrial applications.
ACS Applied Nano Materials, 2021
Bidimensional (2D) materials are nowadays being developed as outstanding candidates for electronic and optoelectronic components and devices. Targeted applications include sensing, energy conversion, and storage. Phosphorene is one of the most promising systems in this context, but its high reactivity under atmospheric conditions and its small-area/labscale deposition techniques have hampered the introduction of this material in real-world applications so far. However, phosphorene oxides in the form of low-dimensional structures (2D PO x) should behave as an electroresponsive material according to recent theoretical studies. In the present work, we introduce electrospraying for the deposition of stoichiometric and large-area 2D PO x nanoflakes starting from a suspension of liquid-phase-exfoliated phosphorene. We obtained 2D PO x nanostructures with a mean surface area two orders of magnitude larger than phosphorene structures obtained with standard mechanical and liquid exfoliation techniques. X-ray spectroscopy and high-resolution electron microscopy confirmed the P 2 O 5-like crystallographic structure of the electrosprayed flakes. Finally, we experimentally demonstrated for the first time the electromechanical responsivity of the 2D P 2 O 5 nanoflakes, through piezoresponse force microscopy (PFM). This work sheds light on the possible implementation of phosphorus oxide-based 2D nanomaterials in the value chain of fabrication and engineering of devices, which might be easily scaled up for energy-harvesting/conversion applications.
A Perspective on Recent Advances in Phosphorene Functionalization and Its Applications in Devices
European Journal of Inorganic Chemistry, 2018
Phosphorene, the 2D material derived from black phosphorus, has recently attracted a lot of interest for its properties, suitable for applications in material science. In particular, the physical features and the prominent chemical reactivity on its surface render this nanolayered substrate particularly promising for electrical and optoelectronic applications. In addition, being a new potential ligand for metals, it opens the way for a new role of the inorganic chemistry in the 2D world, with special reference to the field of catalysis. The aim of this review is to summarize the state of the art in this subject and to present our most recent results in preparation, functionalization and use of phosphorene and its decorated derivatives. In particular, we discuss several key points, which are currently under investigation: the synthesis, the characterization by theoretical calculations, the high pressure behaviour of black phosphorus, as well as decoration with nanoparticles and encapsulation in polymers. Finally, device fabrication and electrical transport measurements are overviewed on the basis of recent literature and new results collected in our laboratories.
A Perspective on Recent Advances in Phosphorene Functionalization and its Application in Devices
European Journal of Inorganic Chemistry
Phosphorene, the 2D material derived from black phosphorus, has recently attracted a lot of interest for its properties, suitable for applications in material science. In particular, the physical features and the prominent chemical reactivity on its surface render this nanolayered substrate particularly promising for electrical and optoelectronic applications. In addition, being a new potential ligand for metals, it opens the way for a new role of the inorganic chemistry in the 2D world, with special reference to the field of catalysis. The aim of this review is to summarize the state of the art in this subject and to present our most recent results in preparation, functionalization and use of phosphorene and its decorated derivatives. In particular, we discuss several key points, which are currently under investigation: the synthesis, the characterization by theoretical calculations, the high pressure behaviour of black phosphorus, as well as decoration with nanoparticles and encapsulation in polymers. Finally, device fabrication and electrical transport measurements are overviewed on the basis of recent literature and new results collected in our laboratories.
A Ray of Hope for Future Technology: Phosphorene
Indian Journal of Science and Technology, 2017
In the recent times, two dimensional layered single crystals attracted huge attention to their tunable mechanical, optical and electronic properties which have potential applications in future nanoelectronics and optoelectronics for large scale integration in low power technology. Phosphorene, the single- or few layer form of black phosphorus, was lately investigated as a two dimension layered material with motivating promising applications in the field of nanoelectronics and optoelectronics. However, there is still a need for developing its fundamental properties, design schemes and growth techniques. In this context, we review about the recent progress in phosphorene studies, primarily on the fabrication process, properties, forthcoming applications and challenges. In this article, the anisotropic properties (electronic, optoelectronic, thermoelectric and mechanical) of phosphorene, due to its puckered structure is also highlighted. The extraordinary properties of phosphorene make it a future material for designing and fabrication of nanodevices, and more fundamental and technological developments can be established in the near future.
arXiv (Cornell University), 2014
Thin layers of black phosphorus have recently raised interest for their two-dimensional (2D) semiconducting properties, such as tunable direct bandgap and high carrier mobilities. This lamellar crystal of P atoms stacked together by weak van der Waals forces can be exfoliated down to the stratophosphane monolayer (also called phosphorene) using procedures similar to those used for graphene. Properties of this 2D material are however challenging to probe due to a fast and ubiquitous degradation upon exposure to ambient conditions. Herein, we investigate the crystal degradation using in-situ Raman and transmission electron spectroscopies and highlight a process involving a photo-induced oxidation reaction with adsorbed oxygen in water. The experimental conditions to prepare and preserve mono-, bi-and multilayers of stratophosphane in their pristine states were determined. Study on these 2D layers provides new insights on the effect of confinement on the chemical reactivity and the vibrational modes of black phosphorus.
Thin layers of black phosphorus have recently raised interest for their two-dimensional semiconducting properties, such as tunable direct bandgap and high carrier mobilities. This lamellar crystal of P atoms stacked together by weak van der Waals forces can be exfoliated down to the stratophosphane monolayer (also called phosphorene) using procedures similar to those used for graphene. Properties of this new material are however challenging to probe due to a fast and ubiquitous degradation upon exposure to ambient conditions. Herein, we investigate the crystal degradation using in-situ Raman and transmission electron spectroscopies and highlight a process involving a photo-induced oxidation reaction with adsorbed oxygen in water. The experimental conditions to prepare and preserve stratophosphane mono-, bi- and multi-layers in their pristine states were determined. Study of these pristine layers provides new insights on the effect of confinement on the chemical reactivity and the vi...