Optimization of Seismic Isolation Systems with Viscous Fluid Dampers Using Genetic Algorithms (original) (raw)
Related papers
A NEW ADDED DAMPING RUBBER ISOLATOR (ADRI): EXPERIMENTAL TESTS AND NUMERICAL SIMULATIONS
A new rubber-based isolation device, with added damping capacity, is proposed. Similarly to the LRB's (Lead Rubber Bearings) or HDRB's (High Damping Rubber Bearings), the proposed solution combines, in a single compact device, the functions of supporting vertical loads, providing horizontal flexibility and restoring force together with the function of dissipate a great amount of energy. On the other hand, the proposed device shows a series of advantages with respect to LRB's and HDRB's, which are herein properly discussed. A comprehensive program of experimental tests was carried out at the Structural Laboratory of the University of Basilicata, to characterize the mechanical behaviour of the new Added viscous Damping-Rubber-Isolator (ADRI). Several non linear numerical analysis were then carried out, in order to investigate the effectiveness of ADRI in reducing the response of seismically isolated bridges. In this paper the main results of both experimental tests and...
Structural Optimization of Vibration Isolation Devices for High Performances
2008
This paper is a summary of the large study regarding the isolation performances improvement of the vibration isolation devices. The main area of this study was framed by the passive isolation, using different structural configurations, based on the compressing and torsion rubber elements. First, it is present the few theoretical aspects regarding the dynamic analysis of the passive elastic anti-vibrational devices and their isolation degree evaluation. It have to be mentioned that in this paper there are presented only the final structural configurations of passive isolation devices, obtained by a selection procedure based on the numerical simulation and instrumental tests of dynamic behaviour for each type. Taking into account the structure of the basic compressing and torsion elastic elements, their working principle, and their functional restraints, there was tested a lot of possible configurations, both from the structural, and from the functional points of view. Through the com...
Journal of Civil Engineering and Management, 2013
ABSTRACT This work presents the development and implementation of the Multiple Regression Analysis (MRA) model to Seismic-Isolation (SI) systems consisting of Natural Rubber Bearings and Viscous Fluid Dampers subject to Near-Field (NF) earthquake ground motion. A model representing a realistic five-story base-isolated building is used. Several damper properties are used in creating an array of feasible combinations for the SI system. Two ensembles of seven NF earthquake records are utilized representing two seismic hazard levels. The key response parameters investigated are the Total Maximum Displacement, the Peak Damper Force and the Top Story Acceleration Ratio of the isolated structure compared to the fixed-base structure. Mathematical models for the key response parameters are established via MRA. The MRA models produced acceptable results with significantly less computation. This is demonstrated via a practical example of how the MRA models would be incorporated in the design process, especially at the preliminary stages.
Numerical Modelling of Rubber Vibration Isolators: identification of material parameters
2004
Rubber vibration isolators are used for vibration isolation of engines at high frequencies. To make a good prediction regarding the characteristics of a vibration isolator in the design process, numerical models can be used. However, for a reliable prediction of the dynamic behavior of the isolator, the rubber material parameters have to be known. In practice the material parameters have to be determined with help of experiments. Normally a Dynamic Mechanical Analyzer (DMA) is used to measure the dynamic material properties of test samples of the rubber. However, test samples of the rubber part of the mount are often not available. For this reason a procedure is developed to determine the parameters that describe the material behavior of an isolator with the help of measurements of the entire isolator. Two measurements are used: a static force-displacement and a dynamic transfer stiffness measurement. A finite element model (ABAQUS) of the mount is made and the material parameters a...
Estimation of damping capacity of rubber vibration isolators under harmonic excitation
2016
The elastomeric compensation device mounted between the vibrating base and protecting object is the main element of any the passive vibration protection system. Rubber and rubber-like materials (elastomers) are the most suitable material for such devices due to their capability of absorbing input energy much better than other construction materials. In this paper rubber absorber of prismatic form with parallel flat ends under axial harmonic kinematic excitation is considered. For the estimation of damping properties of the rubber vibroabsorber two approaches are applied: using the mechanical models based on combination of elastic and viscous elements and using analytical representation of integral equations of creep and relaxation. In this article Maxwell and Burgers mechanical models and Rabotnov’s kernel for analytical representation are used. Damping properties are expressed by the ratio of amplitude of the driving vibration to the amplitude of the forced oscillations of object. ...