Analysis of Exhaust Gas Emission in the Marine Two-Stroke Slow-Speed Diesel Engine (original) (raw)
Related papers
Optimization of Ship Propulsion Diesel Engine to Fulfill the New Requirements for Exhaust Emissions
Impacts of exhaust gas emissions on the environment and air pollution from ships have received considerable attention in the past few decades. Due to the characteristics of the combustion process, typical for large marine two-stroke low-speed engines, and the use of residual fossil fuels, the world's fleet emits into the atmosphere significant amount of pollutants such as nitrogen oxides (NO x), carbon monoxide (CO), carbon dioxide (CO 2), hydrocarbons (HC), sulphur oxides (SO x) and carbon particles (PM). Impact assessment of the process of their formation, emitted amounts and the influence of emission are important factors for decision making in regulation development and also for engine designers who aim to improve low-speed two-stroke marine engines, for further tightening of regulations regarding limiting emissions. This paper consists of three parts: the first section describes the injection and combustion process in lowspeed two-stroke marine engines, the second part describes the formation of the exhaust gas emissions as a product of the combustion process and the third part, in which the known techniques to reduce harmful emissions that are currently used in low-speed two-stroke marine engines are described. 1
Journal of Mechanical Science and Technology, 2008
Taking into account the complexity and cost of a direct experimental approach, the recourse to simulation, which can also predict inaccessible information by measurement, offers an effective and fast alternative to apprehend the problem of pollutant emissions from internal combustion engines. An analytical model based on detailed chemical kinetics employed to calculate the pollutant emissions of a marine Diesel engine in general gave satisfactory results compared to experimentally measured results. Especially, the nitric oxide (NO) emission values were found to be higher than the limiting values tolerated by the International Maritime Organization (IMO). Thus, this study was undertaken to reduce to the maximum these emissions. The reduction of pollutant emissions is apprehended with exhaust gas recirculation (EGR).
Maritime Technology and Engineering III, 2016
In this work, the thermal performance characteristics and emissions of VCR, one cylinder compression ignition (CI) engine fuelled with a mixture of two biodiesel in a blend with diesel has been assessed by using artificial neural network (ANN). Further, the two biodiesel considered are Pongamia and Jatropha mixed in different volume ratio, i.e. 25:75, 50:50, 75:25 these mixtures are called M1, M2, and M3. The mixtures are used to prepare the various blends operated with diesel fuel, which are utilized in the experimentation. The engine experimental data required for the training and validation of ANN model are obtained through the VCR engine operated with pure diesel and blends of two biodiesel mixture as a fuel at different load and compression ratio. To train the ANN model, mixture ratio, blend ratio, load and compression ratio (CR), are selected as the inputs and output variables are brake specific fuel consumption (BSFC), exhaust gas temperature (EGT), brake thermal efficiency (BTE), carbon monoxide (CO), hydrocarbons (HC), nitrogen oxides (NO x), smoke density. Different architectures of ANN are trained by varying the number of hidden neurons in the hidden layer and corresponds to the minimum mean square error (MSE) for validation data for selecting the optimum architecture to estimate the parameters. The thermal performance and emissions of VCR engine estimated by using proposed ANN model are found to be quite close to experimental values with reasonable accuracy as the correlation coefficient is ranging from 0.97 to 0.99.
Revista de Chimie, 2019
Maritime University of Constanta, Faculty of Naval Electromechanics, 104 Mircea cel Batran Str., 900663, Constanta, Romania Combustion inside diesel engine cylinders is the critical factor that controls the emission and combustion gases. Fuel injection in the engine cylinder is the decisive factor in the combustion of diesel engines and, consequently, combustion can be effectively controlled if the fuel injection process is efficiently controlled. From this perspective, the simulation of the complex processes of fuel injection in diesel engines in various situations can make a positive contribution to the optimization of marine propulsion systems. Also, correct dimensioning of the injection system components and its optimization and, implicitly, the combustion parameters, can have positive results in the context of reducing the impact of combustion gases of internal combustion engines, on the greenhouse effect and global warming.
Model simulation of high power diesel engine exhaust gas pollutants
This paper tried to simulate the combustion inside the marine diesel engine using the newest computer methods and technologies with the result of a diverse and rich palette of solutions, extremely useful for the study and prediction of complex phenomena of the fuel combustion.
Low-Speed Marine Diesel Engine Modeling for NOx Prediction in Exhaust Gases
Energies, 2021
Knowing the process of generating exhaust emissions and the determination of influential parameters are important factors in improving two-stroke slow-speed marine engines, particularly for further reductions in fuel consumption and stringent regulations on the limitation of nitrogen oxide emissions. In this article, a model of a marine low-speed two-stroke diesel engine has been developed. Experimental and numerical analyses of the nitrogen monoxide formations were carried out. When measuring the concentration of nitrogen oxides in the exhaust emissions, the amount of nitrogen dioxide (NO2) is usually measured, because nitrogen monoxide is very unstable, and due to the large amount of oxygen in the exhaust gases, it is rapidly converted into nitrogen dioxide and its amount is included in the total emission of nitrogen oxides. In this paper, the most significant parameters for the formation of nitrogen monoxide have been determined. Model validation was performed based on measured c...
Marine Diesel Engine Exhaust Emissions Measured in Ship’s Dynamic Operating Conditions
Sensors, 2020
The paper presents the results of research on measuring the emissions from marine diesel engines in dynamic states. The problem is as follows: How to measure emissions of the composition of exhaust gases on board a ship, without direct measurement of fuel consumption and an air flow to marine diesel engine, during maneuvering the ship in the port area. The authors proposed a measurement methodology using an exhaust gas analyzer with simultaneous recording of the load indicator, engine speed, inclinometer, and Global Positioning System (GPS) data. Fuel consumption was calculated based on mean indicated pressure (MIP) tests. Recorded data were processed in the LabView systems engineering software. A simple neural network algorithm was used to model the concentrations of ingredients contained in engine exhaust gases during dynamic states. Using the recorded data, it is possible to calculate the emissions of the composition of exhaust gases from the marine diesel engine and calculate th...
Advances in Mechanical Engineering, 2009
Taking into account the complexity and cost of a direct experimental approach, the recourse to simulation, which can also predict inaccessible information by measurement, offers an effective and fast alternative to apprehend the problem of pollutant emissions from internal combustion engines. An analytical model based on detailed chemical kinetics employed to calculate the pollutant emissions of a marine Diesel engine in general gave satisfactory results compared to experimentally measured results. Especially, the nitric oxide (NO) emission values were found to be higher than the limiting values tolerated by the International Maritime Organization (IMO). Thus, this study was undertaken to reduce to the maximum these emissions. The reduction of pollutant emissions is apprehended with exhaust gas recirculation (EGR).
Possibilities to Reduce Pollutant Emissions in Naval Diesel Engines
Mechanical Testing and Diagnosis
The combustion process is, by far, the most important and complex process that takes place in engines. Its importance is given by the fact that it provides the flow of energy used in the engine and is the source of all pollutant emissions, the efficiency of the engine being directly influenced by it. The mechanisms of combustion are particularly complex and are not fully known even today, the most difficult problem being the mechanisms of mixture formation and the chemistry of the combustion process. Over time, depending on the evolution of knowledge in the field and computer technology, various mathematical models have been developed, which have. Emission estimation and theoretical verification, in the first phase, of the solutions applicable to in-service enginescould greatly reduce research and production costs, given that there are a variety of engines onboard ships and measurements in operation are very difficult.
Analyse of marine diesel engine performance
Journal of Polish CIMAC, 2012
Ships safety and economic efficiency depends on the main and auxiliary diesel engines technical condition and technical operation. The probability of failure and a sudden stop of diesel at sea would be minimized if the routine monitoring of parameters is done and found defects removed on time. The purpose of this control is the even distribution of load between the cylinders under the condition of fuel equipment and main diesel systems normal state. The power plant capacity, fuel efficiency and compliance with MARPOL environmental restrictions depend on it. In this report we will discuss the survey methods of the ship’s diesels working process, which improve their efficiency. Use of such methods will enrich the information capability and modeling quality of the PC based Engine Room simulators.