Density-Based Optimization of the Laser Powder Bed Fusion Process Based on a Modelling Framework (original) (raw)
Related papers
International Journal of Fatigue, 2021
This study investigates the possibility of correlating specimen property to part performance for laser beam powder bed fusion (LB-PBF) additive manufacturing by altering the process parameters in order to create similar thermal histories experienced during fabrication. In particular, the effects of altering scanning speed on LB-PBF 17-4 precipitation hardening (PH) stainless steel (SS) parts with different geometries on the thermal history, as well as the resultant defect formation, microstructure, and fatigue behavior are studied. It was found that parts with different geometries, all fabricated using the same manufacturer recommended process parameters, exhibited different fatigue strengths, which challenges the specimen property to part performance correlation. Melt pool analysis revealed that altering scanning speed can affect the melt pool characteristics including its depth and overlap depth. Increasing the input energy within the process window, by decreasing the scanning speed during fabrication, was seen to result in deeper melt pools and melt pool overlaps, and consequently, less volumetric defects, specifically lack of fusion, in the material. Therefore, the scanning speed was adjusted for different geometries to result in similar melt pool characteristics, as an indicator of the thermal history experienced during fabrication, which also resulted in these parts having similar porosity. Accordingly, fatigue lives of parts fabricated with adjusted process parameters were observed to be within a similar range. While many other factors may be involved, the findings of this research indicate that maintaining a similar thermal history by altering the process parameters is critical in establishing reliable relationships between specimen property and part performance in additive manufacturing.
Additive manufacturing, 2021
Additive manufacturing (AM) has gained considerable academic and industrial interest due to its ability to produce parts with complex geometries with the potential for local microstructural control. However, due to the large number of material and process variables associated with AM, optimization of alloying compositions and process parameters to achieve desired properties is an arduous task. There is a fundamental gap in understanding how changes in process variables, and alloy composition and thermodynamics affect additively manufactured parts. The present systematic study sheds light on the effects of alloying composition and corresponding phase diagram features on the printability and solidification microstructures of four binary nickel-based alloys, namely, Ni-20at.% Cu, Ni-5at.% Al, Ni-5at.% Zr, and Ni-8.8 at.% Zr. These compositions are selected to represent binary isomorphous, weak solute partitioning, strong solute partitioning, and eutectic alloying conditions, respective...
Journal of Materials Research
The widespread adoption of additive manufacturing (AM) in different industries has accelerated the need for quality control of these AM parts. Some of the complex and labor-intensive challenges associated with qualification and certification of AM parts are addressed by modeling and monitoring process conditions. Quantifying melt-track process conditions remains a significant computational challenge due to the large-scale differential between melt pool and part volumes. This work explores a novel point field (PF) driven AM model-based process metric (AM-PM) approach for calculating melt track resolved process conditions with maximal computational speed. A cylindrical Ti-6Al-4V test article with 16 equiangular zones having varied process parameters was built. The melt-track resolved AM-PMs were calculated and mapped to porosity existence for the 5.8-million-point PF of the test article. AM-PMs were calculated in 6.5 min, ~ 665 × faster than a similarly sized finite element calculatio...
2020
Laser Powder Bed Fusion (LPBF), like many other additive manufacturing techniques, offers flexibility in design expected to become a disruption to the manufacturing industry. The current cost of LPBF process does not favor a try-and-error way of research; which makes modelling and simulation a field of superior importance in that area of engineering. In this work, various methods used to overcome challenges in modeling at different levels of approximation of LPBF process are reviewed. Recent efforts made towards a reliable and computationally effective model to simulate LPBF process using Finite Element (FE) codes are presented. A combination of Ray-Tracing technique, the solution of the Radiation Transfer Equation and absorption measurements has been used to establish an analytical equation; which gives a more accurate approximation of laser energy deposition in powder-substrate configuration. When this new analytical energy deposition model is used in in FE simulation, with other physics carefully set, it enables to get reliable cooling curves and melt track morphology that agree well with experimental observations. The use of more computationally effective approximation, without explicit topological changes, allows to simulate wider geometries and longer scanning time leading to many applications in real engineering world. Different applications are herein presented including: prediction of printing quality through the simulated overlapping of consecutive melt tracks, simulation of LPBF of a mixture of materials and estimation of martensite inclusion in printed steel.
Targeted rework of powder bed fusion additive manufacturing
2018
There is a clear industrial pull to fabricate high value components using premium high temperature aerospace materials by additive manufacturing. Inconveniently, the same materials’ properties which allow them to perform well in service render them difficult to process via powder bed fusion. Current build systems are characterised by high defect rates and erratic microstructure, leading to components with inferior mechanical properties. Given the high specific costs in powder bed fusion manufacture there is a real and apparent need to minimise component scrappage due to these defects. Here a method is proposed to make good the defects that will inevitably be produced in current class laser processing of metallic powders. This study investigates the use of spatially resolved acoustic spectroscopy (SRAS) scan data to inform repair strategies within a commercial selective laser melting machine. Using the common aerospace nickel superalloys, Inconel 718 and CM247-LC, localised remelting...
The International Journal of Advanced Manufacturing Technology, 2020
An important quality-related aspect of metal-based additive manufacturing (AM) parts is the existence of thermal stresses and deformations. To address this issue, a 3D thermal simulation approach for powder bed fusion (PBF) processes has been developed, along with the definition of an index that encapsulates the intensity of the non-uniformity of the thermal field. The proposed approach delivers sufficient and computationally low-cost results regarding the intensity of the expected thermal stresses and deformations. A case study of eighteen parts is presented, in which eight different scanning strategies are tested to identify the optimum scanning strategy in terms of thermal stresses and deformations. Finally, the impact of different design elements on the importance of the scanning strategy selection in terms of thermal stresses and deformations is discussed. Both the developed model and the index have been benchmarked using experimental and computational data.
2021
The powder bed fusion (PBF) metal additive manufacturing (AM) method uses an energy source like a laser to melt the metal powders. The laser can locally melt the metal powders and creates a solid structure as it moves. The complexity of the heat distribution in laser PBF metal AM is one of the main features that need to be accurately addressed and understood to design and manage an optimized printing process. In this research, the dependency of local thermal rates and gradients on print after solidification (in the heat-affected zone) was numerically simulated and studied to provide information for designing the print process. The simulation results were validated by independent experimental results. The simulation shows that the local thermal rates are higher at higher laser power and scan speed. Also, the local thermal gradients increase if the laser power increases. The effect of scan speed on the thermal gradients is opposite during heating versus cooling times. Increasing the s...
Additive Manufacturing, 2019
Additive manufacturing that allows layer by layer shaping of complex structures is of rapidly increasing interest in production technology. A particularly rapid prototyping technique of additive manufacturing is laser beam melting (LBM). This 3D printing method is based on a powder bed fusion technique, using a high-powered laser to melt and consolidate metallic powders. The process needs a tightly controlled atmosphere of inert gas, which requires a confined space of a building chamber. This and more process related factors like elevated temperatures, laser radiation or the resulting light intensity caused by the melting of metals, make a closed-loop quality control very ambitious. In this paper, we propose a new in-process approach for quality control with high precision metrology based on structured light. The precise layer by layer dimensional measurement of both the printed part and the powder deposition, allows for process assessment in-or off-line.
Procedia structural integrity, 2019
The main concern deriving from the Selective Laser Melting technique is attaining a fully dense part out of the interconnected tracks. The right choice of process parameters is of fundamental importance to get a porosity free component. In this work a model has been developed simulating the printing process with the aim of creating a simple numerical tool for designing processing windows suitable to metal alloys of any composition. The applied simplified approach makes the model use as much practical as possible, while keeping the physical description representative. The model has been calibrated fitting experimental measures of track width, depth and cross sectional area taken from three literature sources, referring to: Ti6Al4V, Inconel 625 and Al7050. Effective liquid pool thermal conductivity, laser absorptivity and depth of application of laser energy are the fitting parameters. Laser absorptivity and depth of application of laser energy result to rise almost linearly with increasing specific energy; the slopes of the three analyzed alloys result very close to each other. The obtained results give confidence about the possibility of using the model as a predicting tool after further calibration on a wider range of metal alloys.
An integrated design methodology for components produced by laser powder bed fusion (L-PBF) process
Virtual and Physical Prototyping, 2018
Laser powder bed fusion (L-PBF) is an additive manufacturing (AM) process that allows to build full dense metal complex part. However, despite the obvious benefits of L-PBF process, it is affected by specific technological drawbacks and it suffers from issues regarding design support tools. In order to fully exploit the advantages of L-PBF, it is necessary to know the technological constraints, such as material availability and the need to minimise the support structures. In this paper, an integrated design procedure that involves topology optimisation, design for laser powder bed fusion rules and finishing requirements is presented in order to define practical guidelines for successful AM of metal parts. The procedure is tested using a case study to prove the effectiveness of the proposed approach.