KickRom-Progger Flash Rom programming device v2 - Alinea Computer (original) (raw)

Contact
Legal Notice
Checkout
You do not have any products in your shopping cart yet.

For a larger view click on the thumbnail

Zero-force base (high quality)

25-pin serial cable (2 m)

incl. Joyport Power Adapter

Stock: Product available

Add to cart

Product no.: flashv2

Reviews: (0)

Manufacturer: Alinea Computer

Print datasheet

Products description

With the KickRom-Progger v2 you can program/read out Flash-Rom (27C400 emulators) components in version 1.0 (pin header must be turned accordingly) up to 2.0 from Alinea Computer as well as read out commercially available 27C400 components. The programming device can be operated directly on your Amiga via the serial interface. In addition to the serial interface, the programmer can also be connected to any computer via USB. The programmer is operated via its own firmware, which is controlled from the computer via a terminal programme and can therefore be run on virtually any platform. From V2 onwards, the Progger has a USB-C socket for data transfer and power supply instead of a MicroUSB interface.

The device is the world's first programmer that can burn its own Kickstart roms directly on the Amiga.

Features

Programs Flash-Rom (27C400 emulators) devices of the brand Alinea Computer version 1.0 to 2.0
Can read flash roms, commercially available 27C400 and compatible devices
Programmer can be operated on USB (USB-C port )and on a RS-232 (serial interface) (switchable via the jumper)
Programmer is controlled with terminal programme. Can therefore be used on virtually any platform
Depending on the performance of the Amiga/computer, different transfer rates (from 9,600 to 921,600 bps) can be set. Only a maximum of 115,200 bps is possible via the Amiga's serial interface.
Control software is available in German and English
Bin and Rom files programmable (byteswap is performed for Rom files)
As of V2, the Y modem is also supported in addition to the X modem protocol. The programming device has the following additional capabilities with the Y modem protocol:
- File size of the file to be programmed is checked before the programming process
- Support for packet sizes of 1024 bytes. This enables faster transmission.
- All 4 blocks can be read out directly and are automatically divided into four files and named according to the block numbers (rom_x.bin).
- All 4 blocks can be written directly to the respective block by naming the block number in the file name (file_[1-4]).
- A byte swap is automatically performed for .rom based on the file extension
Firmware can be updated by the user via serial interface

System requirements

Minimum for Amiga computers: 68000 processor and 1 MB Ram and serial interface
Recommended configuration for Amiga computers: 68020 processor and 4 MB Ram or higher with a desired maximum transfer speed of full 115,200 Bps
Optional: interface card for transfers with less processor load
Alternatively: Computer with USB interface (up to 921,600 Bps possible with USB)
5V power supply or joyport power adapter (selectable above) with cable and USB-C connector to power the unit
Terminal programme (Ncom is recommended on the Amiga, as Y-modem mode works when reading the blocks, unfortunately writing is only possible individually)

Included

Programmer v2
Printed case
Individual colours of the case can be printed as a 3D model yourself
8-pin ribbon cable to connect to the flash roms
Manual
Optional: Zero-force socket (selectable above)
Optional: 25-pin serial extension cable (selectable above, needed for Big Box Amigas)
Optional: Joyport power adapter with USB-C cable (selectable above)
Optional: 5V power adapter with USB-C connector (cable selectable above)

2 years warranty

References

Hardware Design: https://gitlab.com/rwahler1/kicad/Amiga_27C400_Programmer.git

Software: https://gitlab.com/rwahler1/code/Attiny1606_27C400_Programmer.git
Changelog: https://gitlab.com/rwahler1/code/Attiny1606_27C400_Programmer/-/blob/master/changelog.txt
Firmware Update Tool: https://gitlab.com/rwahler1/code/avruploader

Case 3D model: www.thingiverse.com/thing:6260117