gdbus-codegen linux command man page (original) (raw)

is used to generate code and/or documentation for one or more D-Bus interfaces. The tool reads m[blue]D-Bus Introspection XMLm[][1]files and generates output files. The tool currently supports generating C code (via--generate-c-code) and Docbook XML (via--generate-docbook).

GENERATING C CODE

When generating C code, a #GInterface -derived type is generated for each D-Bus interface. Additionally, for every generated type,FooBar, two concrete instantiable types,FooBarProxyandFooBarSkeleton, implementing said interface are also generated. The former is derived from #GDBusProxy and intended for use on the client side while the latter is derived from the #GDBusInterfaceSkeleton type making it easy to export on a #GDBusConnection either directly or via a #GDBusObjectManagerServer instance.

The name of each generated C type is derived from the D-Bus interface name stripped with the prefix given with--interface-prefixand with the dots removed and initial characters capitalized. For example, for the D-Bus interface com.acme.Coyote the name used is ComAcmeCoyote. For the D-Bus interface org.project.Bar.Frobnicator with--interface-prefixorg.project., the name used is BarFrobnicator.

For methods, signals and properties, if not specified, the name defaults to the name of the method, signal or property.

Two forms of the name are used - the CamelCase form and the lower-case form. The CamelCase form is used for the #GType and struct name, while lower-case form is used in function names. The lower-case form is calculated by converting from CamelCase to lower-case and inserting underscores at word boundaries (using certain heuristics).

If the value given by the org.gtk.GDBus.C.Name annotation or the--c-namespaceoption contains an underscore (sometimes called_Ugly_Case_), then the camel-case name is derived by removing all underscores, and the lower-case name is derived by lower-casing the string. This is useful in some situations where abbreviations are used. For example, if the annotation is used on the interface net.MyCorp.MyApp.iSCSITarget with the value iSCSI_Target the CamelCase form is iSCSITarget while the lower-case form is iscsi_target. If the annotation is used on the method EjectTheiPod with the value Eject_The_iPod, the lower-case form is eject_the_ipod.

GENERATING DOCBOOK DOCUMENTATION

Each generated Docbook XML file (see the--generate-docbookoption for details) is a m[blue]RefEntrym[][2]article describing the D-Bus interface.

OPTIONS

The following options are supported:

-h, --help

Show help and exit.

--xml-files FILE

The D-Bus introspection XML file.

--interface-prefix org.project.Prefix.

A prefix to strip from all D-Bus interface names when calculating the typename for the C binding and the Docbook m[blue]sortas attributem[][3].

--generate-docbook OUTFILES

Generate Docbook Documentation for each D-Bus interface and put it in OUTFILES-NAME.xml where NAME is a place-holder for the interface name, e.g. net.Corp.FooBar and so on.

--generate-c-code OUTFILES

Generate C code for all D-Bus interfaces and put it in OUTFILES.c and OUTFILES.h.

--c-namespace YourProject

The namespace to use for generated C code. This is expected to be in m[blue]CamelCasem[][4]or_Ugly_Case_(see above).

--c-generate-object-manager

If this option is passed, suitable #GDBusObject, #GDBusObjectProxy, #GDBusObjectSkeleton and #GDBusObjectManagerClient subclasses are generated.

--annotate ELEMENT KEY VALUE

Used to inject D-Bus annotations into the given XML files. It can be used with interfaces, methods, signals, properties and arguments in the following way:

gdbus-codegen --c-namespace MyApp
--generate-c-code myapp-generated
--annotate "org.project.InterfaceName"
org.gtk.GDBus.C.Name MyFrobnicator
--annotate "org.project.InterfaceName:Property"
bar bat
--annotate "org.project.InterfaceName.Method()"
org.freedesktop.DBus.Deprecated true
--annotate "org.project.InterfaceName.Method()[arg_name]"
snake hiss
--annotate "org.project.InterfaceName::Signal"
cat meow
--annotate "org.project.InterfaceName::Signal[arg_name]"
dog wuff
myapp-dbus-interfaces.xml

Any UTF-8 string can be used for_KEY_and_VALUE_.

SUPPORTED D-BUS ANNOTATIONS

The following D-Bus annotations are supported bygdbus-codegen:

org.freedesktop.DBus.Deprecated

Can be used on any , , and element to specify that the element is deprecated if its value is true. Note that this annotation is defined in the m[blue]D-Bus specificationm[][1]and can only assume the values true and false. In particular, you cannot specify the version that the element was deprecated in nor any helpful deprecation message. Such information should be added to the element documentation instead.

When generating C code, this annotation is used to add #G_GNUC_DEPRECATED to generated functions for the element.

When generating Docbook XML, a deprecation warning will appear along the documentation for the element.

org.gtk.GDBus.Since

Can be used on any , , and element to specify the version (any free-form string but compared using a version-aware sort function) the element appeared in.

When generating C code, this field is used to ensure function pointer order for preserving ABI/API, see the section called "STABILITY GUARANTEES".

When generating Docbook XML, the value of this tag appears in the documentation.

org.gtk.GDBus.DocString

A string with Docbook content for documentation. This annotation can be used on , , , and elements.

org.gtk.GDBus.DocString.Short

A string with Docbook content for short/brief documentation. This annotation can only be used on elements.

org.gtk.GDBus.C.Name

Can be used on any , , and element to specify the name to use when generating C code. The value is expected to be in m[blue]CamelCasem[][4]or_Ugly_Case_(see above).

org.gtk.GDBus.C.ForceGVariant

If set to a non-empty string, a #GVariant instance will be used instead of the natural C type. This annotation can be used on any and element.

org.gtk.GDBus.C.UnixFD

If set to a non-empty string, the generated code will include parameters to exchange file descriptors using the #GUnixFDList type. This annotation can be used on elements.

As an easier alternative to using the org.gtk.GDBus.DocString annotation, note that parser used bygdbus-codegenparses XML comments in a way similar to m[blue]gtk-docm[][5]:

Note that @since can be used in any inline documentation bit (e.g. for interfaces, methods, signals and properties) to set the org.gtk.GDBus.Since annotation. For the org.gtk.GDBus.DocString annotation (and inline comments), note that substrings of the form #net.Corp.Bar, net.Corp.Bar.FooMethod(), #net.Corp.Bar::BarSignal and #net.Corp.InlineDocs:BazProperty are all expanded to links to the respective interface, method, signal and property. Additionally, substrings starting with @ and % characters are rendered as m[blue]parameterm[][6]and m[blue]constantm[][7]respectively.

If both XML comments and org.gtk.GDBus.DocString or org.gtk.GDBus.DocString.Short annotations are present, the latter wins.

EXAMPLE

Consider the following D-Bus Introspection XML.

<signal name="Notification">
  <arg name="icon_blob" type="ay"/>
  <arg name="height" type="i"/>
  <arg name="messages" type="as"/>
</signal>

<property name="Verbose" type="b" access="readwrite"/>

Ifgdbus-codegenis used on this file like this:

gdbus-codegen --generate-c-code myapp-generated
--c-namespace MyApp
--interface-prefix net.corp.MyApp.
net.Corp.MyApp.Frobber.xml

two files called myapp-generated.[ch] are generated. The files provide an abstract #GTypeInterface -derived type calledMyAppFrobberas well as two instantiable types with the same name but suffixed withProxyandSkeleton. The generated file, roughly, contains the following facilities:

/* GType macros for the three generated types */ #define MY_APP_TYPE_FROBBER (my_app_frobber_get_type ()) #define MY_APP_TYPE_FROBBER_SKELETON (my_app_frobber_skeleton_get_type ()) #define MY_APP_TYPE_FROBBER_PROXY (my_app_frobber_proxy_get_type ())

typedef struct _MyAppFrobber MyAppFrobber; /* Dummy typedef */

typedef struct { GTypeInterface parent_iface;

/* Signal handler for the ::notification signal */ void (*notification) (MyAppFrobber *proxy, GVariant icon_blob, gint height, const gchar const *messages);

/* Signal handler for the ::handle-hello-world signal */ gboolean (*handle_hello_world) (MyAppFrobber *proxy, GDBusMethodInvocation *invocation, const gchar *greeting); } MyAppFrobberIface;

/* Asynchronously calls HelloWorld() */ void my_app_frobber_call_hello_world (MyAppFrobber *proxy, const gchar *greeting, GCancellable *cancellable, GAsyncReadyCallback callback, gpointer user_data); gboolean my_app_frobber_call_hello_world_finish (MyAppFrobber *proxy, gchar **out_response, GAsyncResult *res, GError **error);

/* Synchronously calls HelloWorld(). Blocks calling thread. */ gboolean my_app_frobber_call_hello_world_sync (MyAppFrobber *proxy, const gchar *greeting, gchar **out_response, GCancellable *cancellable, GError **error);

/* Completes handling the HelloWorld() method call */ void my_app_frobber_complete_hello_world (MyAppFrobber *object, GDBusMethodInvocation *invocation, const gchar *response);

/* Emits the ::notification signal / Notification() D-Bus signal */ void my_app_frobber_emit_notification (MyAppFrobber *object, GVariant icon_blob, gint height, const gchar const *messages);

/* Gets the :verbose GObject property / Verbose D-Bus property.

Does no blocking I/O. */ gboolean my_app_frobber_get_verbose (MyAppFrobber *object);

/* Sets the :verbose GObject property / Verbose D-Bus property.

Does no blocking I/O. */ void my_app_frobber_set_verbose (MyAppFrobber *object, gboolean value);

/* Gets the interface info */ GDBusInterfaceInfo *my_app_frobber_interface_info (void);

/* Creates a new skeleton object, ready to be exported */ MyAppFrobber *my_app_frobber_skeleton_new (void);

/* Client-side proxy constructors. *

Additionally, _new_for_bus(), _new_for_bus_finish() and
_new_for_bus_sync() proxy constructors are also generated. */ void my_app_frobber_proxy_new (GDBusConnection *connection, GDBusProxyFlags flags, const gchar *name, const gchar *object_path, GCancellable *cancellable, GAsyncReadyCallback callback, gpointer user_data);

MyAppFrobber * my_app_frobber_proxy_new_finish (GAsyncResult *res, GError **error); MyAppFrobber * my_app_frobber_proxy_new_sync (GDBusConnection *connection, GDBusProxyFlags flags, const gchar *name, const gchar *object_path, GCancellable *cancellable, GError **error);

Thus, for every D-Bus method, there will be three C functions for calling the method, one #GObject signal for handling an incoming call and one C function for completing an incoming call. For every D-Bus signal, there's one #GObject signal and one C function for emitting it. For every D-Bus property, two C functions are generated (one setter, one getter) and one #GObject property. The following table summarizes the generated facilities and where they are applicable:

| | Client | Server | | | -------------------- | ------------------------------------------------- | ----------------------------------------------------------------------------------------------------------------------- | | Types | Use MyAppFrobberProxy | Any type implementing the MyAppFrobber interface | | Methods | Use m_a_f_hello_world() to call. | Receive via the handle_hello_world() signal handler. Complete the call with m_a_f_complete_hello_world() | | Signals | Connect to the ::notification GObject signal. | Use m_a_f_emit_notification() to emit signal. | | Properties (Reading) | Use m_a_f_get_verbose() or :verbose. | Implement #GObject's get_property() vfunc. | | Properties (writing) | Use m_a_f_set_verbose() or :verbose. | Implement #GObject's set_property() vfunc. |

Client-side usage

You can use the generated proxy type with the generated constructors:

MyAppFrobber *proxy;
GError *error;

error = NULL;
proxy = my_app_frobber_proxy_new_for_bus_sync (
            G_BUS_TYPE_SESSION,
            G_DBUS_PROXY_FLAGS_NONE,
            "net.Corp.MyApp",              /* bus name */
            "/net/Corp/MyApp/SomeFrobber", /* object */
            NULL,                          /* GCancellable* */
            &error);
/* do stuff with proxy */
g_object_unref (proxy);

Instead of using the generic #GDBusProxy facilities, one can use the generated methods such asmy_app_frobber_call_hello_world()to invoke thenet.Corp.MyApp.Frobber.HelloWorld()D-Bus method, connect to the the::notificationGObject signal to receive thenet.Corp.MyApp.Frobber::NoticationD-Bus signal and get/set the_net.Corp.MyApp.Frobber:Verbose_D-Bus Property using either the GObject property_:verbose_or the**my_app_get_verbose()andmy_app_set_verbose()**methods. Use the standard #GObject::notify signal to listen to property changes.

Note that all property access is via #GDBusProxy 's property cache so no I/O is ever done when reading properties. Also note that setting a property will cause the m[blue]org.freedesktop.DBus.Properties.Setm[][8]method to be called on the remote object. This call, however, is asynchronous so setting a property won't block. Further, the change is delayed and no error checking is possible.

Server-side usage

The generatedMyAppFrobberinterface is designed so it is easy to implement it in a #GObject subclass. For example, to handleHelloWorld()method invocations, set the vfunc forhandle_hello_hello_world()in theMyAppFrobberIfacestructure. Similary, to handle the_net.Corp.MyApp.Frobber:Verbose_property override the_:verbose_#GObject property from the subclass. To emit a signal, use e.g.**my_app_emit_signal()**or g_signal_emit_by_name().

Instead of subclassing, it is often easier to use the generatedMyAppFrobberSkeletonsubclass. To handle incoming method calls, use**g_signal_connect()with the::handle-*signals and instead of overriding #GObject 'sget_property()andset_property()**vfuncs, use g_object_get() and g_object_set() or the generated property getters and setters (the generated class has an internal property bag implementation).

static gboolean on_handle_hello_world (MyAppFrobber *interface, GDBusMethodInvocation *invocation, const gchar *greeting, gpointer user_data) { if (g_strcmp0 (greeting, "Boo") != 0) { gchar *response; response = g_strdup_printf ("Word! You said `%s'.", greeting); my_app_complete_hello_world (interface, invocation, response); g_free (response); } else { g_dbus_method_invocation_return_error (invocation, MY_APP_ERROR, MY_APP_ERROR_NO_WHINING, "Hey, %s, there will be no whining!", g_dbus_method_invocation_get_sender (invocation)); } return TRUE; }

[...]

interface = my_app_frobber_skeleton_new (); my_app_frobber_set_verbose (interface, TRUE);

g_signal_connect (interface, "handle-hello-world", G_CALLBACK (on_handle_hello_world), some_user_data);

[...]

error = NULL; if (!g_dbus_interface_skeleton_export (G_DBUS_INTERFACE_SKELETON (interface), connection, "/path/of/dbus_object", &error)) { /* handle error */ }

To facilitate atomic changesets (multiple properties changing at the same time), #GObject::notify signals are queued up when received. The queue is drained in an idle handler (which is called from the thread-default main loop of the thread where the skeleton object was contructed) and will cause emissions of the m[blue]org.freedesktop.DBus.Properties::PropertiesChangedm[][8]signal with all the properties that have changed. Use g_dbus_interface_skeleton_flush() or g_dbus_object_skeleton_flush() to empty the queue immediately. Use g_object_freeze_notify() and g_object_thaw_notify() for atomic changesets if on a different thread.

C TYPE MAPPING

Scalar types (type-strings and and and gchar*, gchar** and so on. Everything else is mapped to the #GVariant type.

This automatic mapping can be turned off by using the annotation org.gtk.GDBus.C.ForceGVariant - if used then a #GVariant is always exchanged instead of the corresponding native C type. This annotation may be convenient to use when using bytestrings (type-string

STABILITY GUARANTEES

The generated C functions are guaranteed to not change their ABI that is, if a method, signal or property does not change its signature in the introspection XML, the generated C functions will not change its C ABI either. The ABI of the generated instance and class structures will be preserved as well.

The ABI of the generated #GType s will be preserved only if the org.gtk.GDBus.Since annotation is used judiciously --- this is because the VTable for the #GInterface relies on functions pointers for signal handlers. Specifically, if a D-Bus method, property or signal or is added to a D-Bus interface, then ABI of the generated #GInterface type is preserved if, and only if, each added method, property signal is annotated with they org.gtk.GDBus.Since annotation using a greater version number than previous versions.

The generated C code currently happens to be annotated with m[blue]gtk-docm[][5]/ m[blue]GObject Introspectionm[][9]comments / annotations. The layout and contents might change in the future so no guarantees about e.g. SECTION usage etc. is given.

While the generated Docbook for D-Bus interfaces isn't expected to change, no guarantees are given at this point.

It is important to note that the generated code should not be checked into revision control systems, nor it should be included in distributed source archives.

BUGS

Please send bug reports to either the distribution bug tracker or the upstream bug tracker at m[blue]**https://bugzilla.gnome.org/enter_bug.cgi?product=glib**m[].