Angle Seat Valves - KAV - Kingston Valves (original) (raw)
Angle Seat Valves for Demanding Applications.
Pneumatically actuated 2/2 way angle seat valve
The externally piloted angle seat valve is operated with a single or double–acting piston actuator. The durable aluminum alloy actuator is suitable for most general service applications. The KAV achieves high flow rates due to the angle valve flow path design, which also minimizes pressure drop through the valve.
- High Cycle-Life
- Visual Indicator
- Robust Seat & Stem
- Actuator Head Rotates 360°
- Integrated Pneumatic Actuator
- Suitable for General Service Applications
Typical Applications
Sterilization/Autoclaves | Steam Applications | Keg Cleaners | Air Drying Equipment | Process Control Applications | Laundry Equipment | Textile Dying & Drying | Air Separation | Filling Operations | Packaging | Refrigeration | Pneumatic Transport | Rubber Processing | Ceramics Processing | Automobile Assembly | Shoemaking | Road Maintenance | Ultrasonic Filtration | Pharmaceutical Manufacturing | Feed Processing | Industrial Compressors | Powder Metallurgy | Nitrogen Generators | Resin Chemical Processing | Wastewater Treatment
Port Size | 3/8” to 2-1/2” NPT |
---|---|
Body Materials | 304 Stainless Steel: standard316 Stainless Steel: on request |
Actuator Material | Aluminum Alloy: standardPlastic: _on request_304 Stainless Steel: on request |
Seal Material | PTFE standard, FKM _on request_PTFE standard, FKM _on request_FKM standard, NBR on request |
Media | Air, Gas, Steam, and Liquid |
Temperature | -20°F to 400°F |
Viscosity | Maximum .93 in2/s |
Operating Pressure | Up to 232 psi maximum |
Max. Actuator Pressure | See Chart Below |
Tri-Clamp | Available Upon Request |
Butt Weld | Available Upon Request |
ANSI Flanged | Available Upon Request |
ORIFICE DIAMETER | PORT SIZE (NPT) | L | HEX | H | D | ACTUATOR (mm) |
---|---|---|---|---|---|---|
10mm | 3/8″ | 2.20 | 0.83 | 6.10 | 2.00 | 40 |
15mm | 1/2” | 2.80 | 1.00 | 6.70 | 2.00 | 40 |
20mm | 3/4” | 3.00 | 1.30 | 7.30 | 2.40 | 50 |
25mm | 1” | 3.50 | 1.60 | 7.70 | 2.40 | 50 |
32mm | 1-1/4” | 4.60 | 2.00 | 9.30 | 3.00 | 63 |
40mm | 1-1/2” | 4.60 | 2.20 | 9.80 | 3.60 | 80 |
50mm | 2” | 5.40 | 2.70 | 10.40 | 3.60 | 80 |
65mm | 2-1/2” | 6.60 | 3.30 | 12.00 | 4.60 | 100 |
1 | Body | 13 | Body Seal PTFE |
---|---|---|---|
2 | Disc Retainer | 14 | Threaded Connector |
3 | Lock Washer | 15 | Retaining Ring |
4 | Disc Washer | 16 | O-Ring NBR |
5 | Disc PTFE | 17 | Piston |
6 | Disc Holder | 18 | U-Seal NBR |
7 | Pin | 19 | Actuator Spring |
8 | Stem | 20 | Piston |
9 | Shaft Seal | 21 | Indicator |
10 | Seal Washer | 22 | Actuator |
11 | Shaft Spring | 23 | Indicator Window |
12 | Shaft Seal | 24 | O-Ring NBR |
OPERATING PRESSURE REQUIREMENTS
Normally Closed, Above the Seat
Normally Closed, Under the Seat
Normally Open, Above the Seat
Normally Open, Under the Seat
Operating Pressure Chart
Normally Closed, Above the Seat
Normally Closed, Under the Seat
Normally Open, Above the Seat
Normally Open, Under the Seat
Operating Pressure Chart