(original) (raw)

OpenSSH 7.4 was released on 2016-12-19. It is available from the mirrors listed at https://www.openssh.com/. OpenSSH is a 100% complete SSH protocol 2.0 implementation and includes sftp client and server support. OpenSSH also includes transitional support for the legacy SSH 1.3 and 1.5 protocols that may be enabled at compile-time. Once again, we would like to thank the OpenSSH community for their continued support of the project, especially those who contributed code or patches, reported bugs, tested snapshots or donated to the project. More information on donations may be found at: http://www.openssh.com/donations.html Future deprecation notice ========================= We plan on retiring more legacy cryptography in future releases, specifically: * In approximately August 2017, removing remaining support for the SSH v.1 protocol (client-only and currently compile-time disabled). * In the same release, removing support for Blowfish and RC4 ciphers and the RIPE-MD160 HMAC. (These are currently run-time disabled). * Refusing all RSA keys smaller than 1024 bits (the current minimum is 768 bits) * The next release of OpenSSH will remove support for running sshd(8) with privilege separation disabled. * The next release of portable OpenSSH will remove support for OpenSSL version prior to 1.0.1. This list reflects our current intentions, but please check the final release notes for future releases. Potentially-incompatible changes ================================ This release includes a number of changes that may affect existing configurations: * This release removes server support for the SSH v.1 protocol. * ssh(1): Remove 3des-cbc from the client's default proposal. 64-bit block ciphers are not safe in 2016 and we don't want to wait until attacks like SWEET32 are extended to SSH. As 3des-cbc was the only mandatory cipher in the SSH RFCs, this may cause problems connecting to older devices using the default configuration, but it's highly likely that such devices already need explicit configuration for key exchange and hostkey algorithms already anyway. * sshd(8): Remove support for pre-authentication compression. Doing compression early in the protocol probably seemed reasonable in the 1990s, but today it's clearly a bad idea in terms of both cryptography (cf. multiple compression oracle attacks in TLS) and attack surface. Pre-auth compression support has been disabled by default for >10 years. Support remains in the client. * ssh-agent will refuse to load PKCS#11 modules outside a whitelist of trusted paths by default. The path whitelist may be specified at run-time. * sshd(8): When a forced-command appears in both a certificate and an authorized keys/principals command= restriction, sshd will now refuse to accept the certificate unless they are identical. The previous (documented) behaviour of having the certificate forced-command override the other could be a bit confusing and error-prone. * sshd(8): Remove the UseLogin configuration directive and support for having /bin/login manage login sessions. Changes since OpenSSH 7.3 ========================= This is primarily a bugfix release. Security -------- * ssh-agent(1): Will now refuse to load PKCS#11 modules from paths outside a trusted whitelist (run-time configurable). Requests to load modules could be passed via agent forwarding and an attacker could attempt to load a hostile PKCS#11 module across the forwarded agent channel: PKCS#11 modules are shared libraries, so this would result in code execution on the system running the ssh-agent if the attacker has control of the forwarded agent-socket (on the host running the sshd server) and the ability to write to the filesystem of the host running ssh-agent (usually the host running the ssh client). Reported by Jann Horn of Project Zero. * sshd(8): When privilege separation is disabled, forwarded Unix- domain sockets would be created by sshd(8) with the privileges of 'root' instead of the authenticated user. This release refuses Unix-domain socket forwarding when privilege separation is disabled (Privilege separation has been enabled by default for 14 years). Reported by Jann Horn of Project Zero. * sshd(8): Avoid theoretical leak of host private key material to privilege-separated child processes via realloc() when reading keys. No such leak was observed in practice for normal-sized keys, nor does a leak to the child processes directly expose key material to unprivileged users. Reported by Jann Horn of Project Zero. * sshd(8): The shared memory manager used by pre-authentication compression support had a bounds checks that could be elided by some optimising compilers. Additionally, this memory manager was incorrectly accessible when pre-authentication compression was disabled. This could potentially allow attacks against the privileged monitor process from the sandboxed privilege-separation process (a compromise of the latter would be required first). This release removes support for pre-authentication compression from sshd(8). Reported by Guido Vranken using the Stack unstable optimisation identification tool (http://css.csail.mit.edu/stack/) * sshd(8): Fix denial-of-service condition where an attacker who sends multiple KEXINIT messages may consume up to 128MB per connection. Reported by Shi Lei of Gear Team, Qihoo 360. * sshd(8): Validate address ranges for AllowUser and DenyUsers directives at configuration load time and refuse to accept invalid ones. It was previously possible to specify invalid CIDR address ranges (e.g. user@127.1.2.3/55) and these would always match, possibly resulting in granting access where it was not intended. Reported by Laurence Parry. New Features ------------ * ssh(1): Add a proxy multiplexing mode to ssh(1) inspired by the version in PuTTY by Simon Tatham. This allows a multiplexing client to communicate with the master process using a subset of the SSH packet and channels protocol over a Unix-domain socket, with the main process acting as a proxy that translates channel IDs, etc. This allows multiplexing mode to run on systems that lack file- descriptor passing (used by current multiplexing code) and potentially, in conjunction with Unix-domain socket forwarding, with the client and multiplexing master process on different machines. Multiplexing proxy mode may be invoked using "ssh -O proxy ..." * sshd(8): Add a sshd_config DisableForwarding option that disables X11, agent, TCP, tunnel and Unix domain socket forwarding, as well as anything else we might implement in the future. Like the 'restrict' authorized_keys flag, this is intended to be a simple and future-proof way of restricting an account. * sshd(8), ssh(1): Support the "curve25519-sha256" key exchange method. This is identical to the currently-supported method named "curve25519-sha256@libssh.org". * sshd(8): Improve handling of SIGHUP by checking to see if sshd is already daemonised at startup and skipping the call to daemon(3) if it is. This ensures that a SIGHUP restart of sshd(8) will retain the same process-ID as the initial execution. sshd(8) will also now unlink the PidFile prior to SIGHUP restart and re-create it after a successful restart, rather than leaving a stale file in the case of a configuration error. bz#2641 * sshd(8): Allow ClientAliveInterval and ClientAliveCountMax directives to appear in sshd_config Match blocks. * sshd(8): Add %-escapes to AuthorizedPrincipalsCommand to match those supported by AuthorizedKeysCommand (key, key type, fingerprint, etc.) and a few more to provide access to the contents of the certificate being offered. * Added regression tests for string matching, address matching and string sanitisation functions. * Improved the key exchange fuzzer harness. Bugfixes -------- * ssh(1): Allow IdentityFile to successfully load and use certificates that have no corresponding bare public key. bz#2617 certificate id_rsa-cert.pub (and no id_rsa.pub). * ssh(1): Fix public key authentication when multiple authentication is in use and publickey is not just the first method attempted. bz#2642 * regress: Allow the PuTTY interop tests to run unattended. bz#2639 * ssh-agent(1), ssh(1): improve reporting when attempting to load keys from PKCS#11 tokens with fewer useless log messages and more detail in debug messages. bz#2610 * ssh(1): When tearing down ControlMaster connections, don't pollute stderr when LogLevel=quiet. * sftp(1): On ^Z wait for underlying ssh(1) to suspend before suspending sftp(1) to ensure that ssh(1) restores the terminal mode correctly if suspended during a password prompt. * ssh(1): Avoid busy-wait when ssh(1) is suspended during a password prompt. * ssh(1), sshd(8): Correctly report errors during sending of ext- info messages. * sshd(8): fix NULL-deref crash if sshd(8) received an out-of- sequence NEWKEYS message. * sshd(8): Correct list of supported signature algorithms sent in the server-sig-algs extension. bz#2547 * sshd(8): Fix sending ext_info message if privsep is disabled. * sshd(8): more strictly enforce the expected ordering of privilege separation monitor calls used for authentication and allow them only when their respective authentication methods are enabled in the configuration * sshd(8): Fix uninitialised optlen in getsockopt() call; harmless on Unix/BSD but potentially crashy on Cygwin. * Fix false positive reports caused by explicit_bzero(3) not being recognised as a memory initialiser when compiled with -fsanitize-memory. * sshd_config(5): Use 2001:db8::/32, the official IPv6 subnet for configuration examples. Portability ----------- * On environments configured with Turkish locales, fall back to the C/POSIX locale to avoid errors in configuration parsing caused by that locale's unique handling of the letters 'i' and 'I'. bz#2643 * sftp-server(8), ssh-agent(1): Deny ptrace on OS X using ptrace(PT_DENY_ATTACH, ..) * ssh(1), sshd(8): Unbreak AES-CTR ciphers on old (~0.9.8) OpenSSL. * Fix compilation for libcrypto compiled without RIPEMD160 support. * contrib: Add a gnome-ssh-askpass3 with GTK+3 support. bz#2640 * sshd(8): Improve PRNG reseeding across privilege separation and force libcrypto to obtain a high-quality seed before chroot or sandboxing. * All: Explicitly test for broken strnvis. NetBSD added an strnvis and unfortunately made it incompatible with the existing one in OpenBSD and Linux's libbsd (the former having existed for over ten years). Try to detect this mess, and assume the only safe option if we're cross compiling. Checksums: ========== - SHA1 (openssh-7.4.tar.gz) = 1e2073f95d5ead8f2814b4b6c0700bcd533c410f - SHA1 (openssh-7.4p1.tar.gz) = 2330bbf82ed08cf3ac70e0acf00186ef3eeb97e0 - SHA256 (openssh-7.4.tar.gz) = +GEXh7Xr2J87cq1uA97hF9e+3lfOQ2LKxXGdmFXREf0 - SHA256 (openssh-7.4p1.tar.gz) = Gx/EoU4gJCkxgZJO0khy5vLgYpPz6JJqN2uK7EgfGdE= Please note that the SHA256 signatures are base64 encoded and not hexadecimal (which is the default for most checksum tools). The PGP key used to sign the releases is available as RELEASE_KEY.asc from the mirror sites. Reporting Bugs: =============== - Please read http://www.openssh.com/report.html Security bugs should be reported directly to openssh@openssh.com OpenSSH is brought to you by Markus Friedl, Niels Provos, Theo de Raadt, Kevin Steves, Damien Miller, Darren Tucker, Jason McIntyre, Tim Rice and Ben Lindstrom.