Get started with microcontrollers (original) (raw)

This document explains how to train a model and run inference using a microcontroller.

The Hello World example

TheHello Worldexample is designed to demonstrate the absolute basics of using LiteRT for Microcontrollers. We train and run a model that replicates a sine function, i.e., it takes a single number as its input, and outputs the number'ssine value. When deployed to the microcontroller, its predictions are used to either blink LEDs or control an animation.

The end-to-end workflow involves the following steps:

  1. Train a model (in Python): A python file to train, convert and optimize a model for on-device use.
  2. Run inference (in C++ 17): An end-to-end unit test that runs inference on the model using the C++ library.

Get a supported device

The example application we'll be using has been tested on the following devices:

Learn more about supported platforms inLiteRT for Microcontrollers.

Train a model

Usetrain.pyfor hello world model training for sinwave recognition

Run: bazel build tensorflow/lite/micro/examples/hello_world:train bazel-bin/tensorflow/lite/micro/examples/hello_world/train --save_tf_model --save_dir=/tmp/model_created/

Run inference

To run the model on your device, we will walk through the instructions in theREADME.md:

Hello World README.md

The following sections walk through the example'sevaluate_test.cc, unit test which demonstrates how to run inference using LiteRT for Microcontrollers. It loads the model and runs inference several times.

To use the LiteRT for Microcontrollers library, we must include the following header files:

#include "tensorflow/lite/micro/micro_mutable_op_resolver.h"
#include "tensorflow/lite/micro/micro_error_reporter.h"
#include "tensorflow/lite/micro/micro_interpreter.h"
#include "tensorflow/lite/schema/schema_generated.h"
#include "tensorflow/lite/version.h"

The LiteRT for Microcontrollers interpreter expects the model to be provided as a C++ array. The model is defined in model.h and model.cc files. The header is included with the following line:

#include "tensorflow/lite/micro/examples/hello_world/model.h"

In order to create a unit test, we include the LiteRT for Microcontrollers unit test framework by including the following line:

#include "tensorflow/lite/micro/testing/micro_test.h"

The test is defined using the following macros:

TF_LITE_MICRO_TESTS_BEGIN

TF_LITE_MICRO_TEST(LoadModelAndPerformInference) {
  . // add code here
  .
}

TF_LITE_MICRO_TESTS_END

We now discuss the code included in the macro above.

4. Set up logging

To set up logging, a tflite::ErrorReporter pointer is created using a pointer to a tflite::MicroErrorReporter instance:

tflite::MicroErrorReporter micro_error_reporter;
tflite::ErrorReporter* error_reporter = &micro_error_reporter;

This variable will be passed into the interpreter, which allows it to write logs. Since microcontrollers often have a variety of mechanisms for logging, the implementation of tflite::MicroErrorReporter is designed to be customized for your particular device.

5. Load a model

In the following code, the model is instantiated using data from a char array,g_model, which is declared in model.h. We then check the model to ensure its schema version is compatible with the version we are using:

const tflite::Model* model = ::tflite::GetModel(g_model);
if (model->version() != TFLITE_SCHEMA_VERSION) {
  TF_LITE_REPORT_ERROR(error_reporter,
      "Model provided is schema version %d not equal "
      "to supported version %d.\n",
      model->version(), TFLITE_SCHEMA_VERSION);
}

6. Instantiate operations resolver

AMicroMutableOpResolverinstance is declared. This will be used by the interpreter to register and access the operations that are used by the model:

using HelloWorldOpResolver = tflite::MicroMutableOpResolver<1>;

TfLiteStatus RegisterOps(HelloWorldOpResolver& op_resolver) {
  TF_LITE_ENSURE_STATUS(op_resolver.AddFullyConnected());
  return kTfLiteOk;

The MicroMutableOpResolverrequires a template parameter indicating the number of ops that will be registered. The RegisterOps function registers the ops with the resolver.

HelloWorldOpResolver op_resolver;
TF_LITE_ENSURE_STATUS(RegisterOps(op_resolver));

7. Allocate memory

We need to preallocate a certain amount of memory for input, output, and intermediate arrays. This is provided as a uint8_t array of sizetensor_arena_size:

const int tensor_arena_size = 2 * 1024;
uint8_t tensor_arena[tensor_arena_size];

The size required will depend on the model you are using, and may need to be determined by experimentation.

8. Instantiate interpreter

We create a tflite::MicroInterpreter instance, passing in the variables created earlier:

tflite::MicroInterpreter interpreter(model, resolver, tensor_arena,
                                     tensor_arena_size, error_reporter);

9. Allocate tensors

We tell the interpreter to allocate memory from the tensor_arena for the model's tensors:

interpreter.AllocateTensors();

10. Validate input shape

The MicroInterpreter instance can provide us with a pointer to the model's input tensor by calling .input(0), where 0 represents the first (and only) input tensor:

  // Obtain a pointer to the model's input tensor
  TfLiteTensor* input = interpreter.input(0);

We then inspect this tensor to confirm that its shape and type are what we are expecting:

// Make sure the input has the properties we expect
TF_LITE_MICRO_EXPECT_NE(nullptr, input);
// The property "dims" tells us the tensor's shape. It has one element for
// each dimension. Our input is a 2D tensor containing 1 element, so "dims"
// should have size 2.
TF_LITE_MICRO_EXPECT_EQ(2, input->dims->size);
// The value of each element gives the length of the corresponding tensor.
// We should expect two single element tensors (one is contained within the
// other).
TF_LITE_MICRO_EXPECT_EQ(1, input->dims->data[0]);
TF_LITE_MICRO_EXPECT_EQ(1, input->dims->data[1]);
// The input is a 32 bit floating point value
TF_LITE_MICRO_EXPECT_EQ(kTfLiteFloat32, input->type);

The enum value kTfLiteFloat32 is a reference to one of the LiteRT data types, and is defined incommon.h.

11. Provide an input value

To provide an input to the model, we set the contents of the input tensor, as follows:

input->data.f[0] = 0.;

In this case, we input a floating point value representing 0.

12. Run the model

To run the model, we can call Invoke() on our tflite::MicroInterpreterinstance:

TfLiteStatus invoke_status = interpreter.Invoke();
if (invoke_status != kTfLiteOk) {
  TF_LITE_REPORT_ERROR(error_reporter, "Invoke failed\n");
}

We can check the return value, a TfLiteStatus, to determine if the run was successful. The possible values of TfLiteStatus, defined incommon.h, are kTfLiteOk and kTfLiteError.

The following code asserts that the value is kTfLiteOk, meaning inference was successfully run.

TF_LITE_MICRO_EXPECT_EQ(kTfLiteOk, invoke_status);

13. Obtain the output

The model's output tensor can be obtained by calling output(0) on thetflite::MicroInterpreter, where 0 represents the first (and only) output tensor.

In the example, the model's output is a single floating point value contained within a 2D tensor:

TfLiteTensor* output = interpreter.output(0);
TF_LITE_MICRO_EXPECT_EQ(2, output->dims->size);
TF_LITE_MICRO_EXPECT_EQ(1, input->dims->data[0]);
TF_LITE_MICRO_EXPECT_EQ(1, input->dims->data[1]);
TF_LITE_MICRO_EXPECT_EQ(kTfLiteFloat32, output->type);

We can read the value directly from the output tensor and assert that it is what we expect:

// Obtain the output value from the tensor
float value = output->data.f[0];
// Check that the output value is within 0.05 of the expected value
TF_LITE_MICRO_EXPECT_NEAR(0., value, 0.05);

14. Run inference again

The remainder of the code runs inference several more times. In each instance, we assign a value to the input tensor, invoke the interpreter, and read the result from the output tensor:

input->data.f[0] = 1.;
interpreter.Invoke();
value = output->data.f[0];
TF_LITE_MICRO_EXPECT_NEAR(0.841, value, 0.05);

input->data.f[0] = 3.;
interpreter.Invoke();
value = output->data.f[0];
TF_LITE_MICRO_EXPECT_NEAR(0.141, value, 0.05);

input->data.f[0] = 5.;
interpreter.Invoke();
value = output->data.f[0];
TF_LITE_MICRO_EXPECT_NEAR(-0.959, value, 0.05);