Paths - SVG 1.1 - 20030114 (original) (raw)

14 January 2003

8.1 Introduction

Paths represent the outline of a shape which can be filled, stroked, used as a clipping path, or any combination of the three. (See Filling, Stroking and Paint Servers and Clipping, Masking and Compositing.)

A path is described using the concept of a current point. In an analogy with drawing on paper, the current point can be thought of as the location of the pen. The position of the pen can be changed, and the outline of a shape (open or closed) can be traced by dragging the pen in either straight lines or curves.

Paths represent the geometry of the outline of an object, defined in terms of moveto (set a new current point),lineto (draw a straight line), curveto (draw a curve using a cubic Bézier), arc (elliptical or circular arc) and closepath (close the current shape by drawing a line to the last moveto) elements. Compound paths (i.e., a path with multiple subpaths) are possible to allow effects such as "donut holes" in objects.

This chapter describes the syntax, behavior and DOM interfaces for SVG paths. Various implementation notes for SVG paths can be found in 'path' element implementation notes and Elliptical arc implementation notes.

A path is defined in SVG using the 'path' element.

8.2 The 'path' element

<![%SVG.path.element;[ <!ENTITY % SVG.path.content "(( %SVG.Description.class; ), ( %SVG.Animation.class; %SVG.path.extra.content; ))"

]]>

<![%SVG.path.attlist;[ <!ATTLIST %SVG.path.qname; %SVG.Core.attrib; %SVG.Conditional.attrib; %SVG.Style.attrib; %SVG.Paint.attrib; %SVG.Color.attrib; %SVG.Opacity.attrib; %SVG.Graphics.attrib; %SVG.Marker.attrib; %SVG.Clip.attrib; %SVG.Mask.attrib; %SVG.Filter.attrib; %SVG.GraphicalEvents.attrib; %SVG.Cursor.attrib; %SVG.External.attrib; d %PathData.datatype; #REQUIRED pathLength %Number.datatype; #IMPLIED transform %TransformList.datatype; #IMPLIED

Attribute definitions:

d = "path data"

The definition of the outline of a shape. See Path data.
Animatable: yes. Path data animation is only possible when each path data specification within an animation specification has exactly the same list of path data commands as the d attribute. If an animation is specified and the list of path data commands is not the same, then the animation specification is in error (see Error Processing). The animation engine interpolates each parameter to each path data command separately based on the attributes to the given animation element. Flags and booleans are interpolated as fractions between zero and one, with any non-zero value considered to be a value of one/true.

pathLength = ""

The author's computation of the total length of the path, in user units. This value is used to calibrate the user agent's own distance-along-a-path calculations with that of the author. The user agent will scale all distance-along-a-path computations by the ratio of pathLength to the user agent's own computed value for total path length. pathLength potentially affects calculations for text on a path, motion animation and various stroke operations.
A negative value is an error (see Error processing).
Animatable: yes.

8.3 Path data

8.3.1 General information about path data

A path is defined by including a 'path' element which contains a d="(path data)" attribute, where the d attribute contains the_moveto_, line, curve (both cubic and quadratic Béziers), arc and closepath instructions.

Example triangle01 specifies a path in the shape of a triangle. (TheM indicates a moveto, theL's indicate lineto's, and thez indicates a closepath).

Example triangle01

View this example as SVG (SVG-enabled browsers only)

Path data can contain newline characters and thus can be broken up into multiple lines to improve readability. Because of line length limitations with certain related tools, it is recommended that SVG generators split long path data strings across multiple lines, with each line not exceeding 255 characters. Also note that newline characters are only allowed at certain places within path data.

The syntax of path data is concise in order to allow for minimal file size and efficient downloads, since many SVG files will be dominated by their path data. Some of the ways that SVG attempts to minimize the size of path data are as follows:

All instructions are expressed as one character (e.g., a_moveto_ is expressed as an M).
Superfluous white space and separators such as commas can be eliminated (e.g., "M 100 100 L 200 200" contains unnecessary spaces and could be expressed more compactly as "M100 100L200 200").
The command letter can be eliminated on subsequent commands if the same command is used multiple times in a row (e.g., you can drop the second "L" in "M 100 200 L 200 100 L -100 -200" and use "M 100 200 L 200 100 -100 -200" instead).
Relative versions of all commands are available (uppercase means absolute coordinates, lowercase means relative coordinates).
Alternate forms of lineto are available to optimize the special cases of horizontal and vertical lines (absolute and relative).
Alternate forms of curve are available to optimize the special cases where some of the control points on the current segment can be determined automatically from the control points on the previous segment.

The path data syntax is a prefix notation (i.e., commands followed by parameters). The only allowable decimal point is a Unicode [UNICODE] FULL STOP (".") character (also referred to in Unicode as PERIOD, dot and decimal point) and no other delimiter characters are allowed. (For example, the following is an invalid numeric value in a path data stream: "13,000.56". Instead, say: "13000.56".)

For the relative versions of the commands, all coordinate values are relative to the current point at the start of the command.

In the tables below, the following notation is used:

(): grouping of parameters
+: 1 or more of the given parameter(s) is required

The following sections list the commands.

8.3.2 The "moveto" commands

The "moveto" commands (M orm) establish a new current point. The effect is as if the "pen" were lifted and moved to a new location. A path data segment (if there is one) must begin with a "moveto" command. Subsequent "moveto" commands (i.e., when the "moveto" is not the first command) represent the start of a new_subpath_:

Command	Name	Parameters	Description
M (absolute) m (relative)	moveto	(x y)+	Start a new sub-path at the given (x,y) coordinate.M (uppercase) indicates that absolute coordinates will follow; m (lowercase) indicates that relative coordinates will follow. If a relative moveto (m) appears as the first element of the path, then it is treated as a pair of absolute coordinates. If a moveto is followed by multiple pairs of coordinates, the subsequent pairs are treated as implicit lineto commands.

8.3.3 The "closepath" command

The "closepath" (Z or z) ends the current subpath and causes an automatic straight line to be drawn from the current point to the initial point of the current subpath. If a "closepath" is followed immediately by a "moveto", then the "moveto" identifies the start point of the next subpath. If a "closepath" is followed immediately by any other command, then the next subpath starts at the same initial point as the current subpath.

When a subpath ends in a "closepath," it differs in behavior from what happens when "manually" closing a subpath via a "lineto" command in how 'stroke-linejoin' and 'stroke-linecap' are implemented. With "closepath", the end of the final segment of the subpath is "joined" with the start of the initial segment of the subpath using the current value of 'stroke-linejoin'. If you instead "manually" close the subpath via a "lineto" command, the start of the first segment and the end of the last segment are not joined but instead are each capped using the current value of 'stroke-linecap'. At the end of the command, the new current point is set to the initial point of the current subpath.

Command	Name	Parameters	Description
Z or z	closepath	(none)	Close the current subpath by drawing a straight line from the current point to current subpath's initial point.

8.3.4 The "lineto" commands

The various "lineto" commands draw straight lines from the current point to a new point:

Command	Name	Parameters	Description
L (absolute) l (relative)	lineto	(x y)+	Draw a line from the current point to the given (x,y) coordinate which becomes the new current point.L (uppercase) indicates that absolute coordinates will follow; l (lowercase) indicates that relative coordinates will follow. A number of coordinates pairs may be specified to draw a polyline. At the end of the command, the new current point is set to the final set of coordinates provided.
H (absolute) h (relative)	horizontal lineto	x+	Draws a horizontal line from the current point (cpx, cpy) to (x, cpy). H (uppercase) indicates that absolute coordinates will follow; h (lowercase) indicates that relative coordinates will follow. Multiple x values can be provided (although usually this doesn't make sense). At the end of the command, the new current point becomes (x, cpy) for the final value of x.
V (absolute) v (relative)	vertical lineto	y+	Draws a vertical line from the current point (cpx, cpy) to (cpx, y). V (uppercase) indicates that absolute coordinates will follow; v (lowercase) indicates that relative coordinates will follow. Multiple y values can be provided (although usually this doesn't make sense). At the end of the command, the new current point becomes (cpx, y) for the final value of y.

8.3.5 The curve commands

These three groups of commands draw curves:

Cubic Bézier commands (C,c, S ands). A cubic Bézier segment is defined by a start point, an end point, and two control points.
Quadratic Bézier commands (Q,q, T andt). A quadratic Bézier segment is defined by a start point, an end point, and one control point.
Elliptical arc commands (A and a). An elliptical arc segment draws a segment of an ellipse.

8.3.6 The cubic Bézier curve commands

The cubic Bézier commands are as follows:

Command	Name	Parameters	Description
C (absolute) c (relative)	curveto	(x1 y1 x2 y2 x y)+	Draws a cubic Bézier curve from the current point to (x,y) using (x1,y1) as the control point at the beginning of the curve and (x2,y2) as the control point at the end of the curve. C (uppercase) indicates that absolute coordinates will follow;c (lowercase) indicates that relative coordinates will follow. Multiple sets of coordinates may be specified to draw a polybézier. At the end of the command, the new current point becomes the final (x,y) coordinate pair used in the polybézier.
S (absolute) s (relative)	shorthand/smooth curveto	(x2 y2 x y)+	Draws a cubic Bézier curve from the current point to (x,y). The first control point is assumed to be the reflection of the second control point on the previous command relative to the current point. (If there is no previous command or if the previous command was not an C, c, S or s, assume the first control point is coincident with the current point.) (x2,y2) is the second control point (i.e., the control point at the end of the curve).S (uppercase) indicates that absolute coordinates will follow; s (lowercase) indicates that relative coordinates will follow. Multiple sets of coordinates may be specified to draw a polybézier. At the end of the command, the new current point becomes the final (x,y) coordinate pair used in the polybézier.

Example cubic01 shows some simple uses of cubic Bézier commands within a path. The example uses an internal CSS style sheet to assign styling properties. Note that the control point for the "S" command is computed automatically as the reflection of the control point for the previous "C" command relative to the start point of the "S" command.

Example cubic01

View this example as SVG (SVG- and CSS-enabled browsers only)

The following picture shows some how cubic Bézier curves change their shape depending on the position of the control points. The first five examples illustrate a single cubic Bézier path segment. The example at the lower right shows a "C" command followed by an "S" command.

Example cubic02 - cubic Bézier commands in path data

View this example as SVG (SVG-enabled browsers only)

8.3.7 The quadratic Bézier curve commands

The quadratic Bézier commands are as follows:

Command	Name	Parameters	Description
Q (absolute) q (relative)	quadratic Bézier curveto	(x1 y1 x y)+	Draws a quadratic Bézier curve from the current point to (x,y) using (x1,y1) as the control point.Q (uppercase) indicates that absolute coordinates will follow; q (lowercase) indicates that relative coordinates will follow. Multiple sets of coordinates may be specified to draw a polybézier. At the end of the command, the new current point becomes the final (x,y) coordinate pair used in the polybézier.
T (absolute) t (relative)	Shorthand/smooth quadratic Bézier curveto	(x y)+	Draws a quadratic Bézier curve from the current point to (x,y). The control point is assumed to be the reflection of the control point on the previous command relative to the current point. (If there is no previous command or if the previous command was not a Q, q, T or t, assume the control point is coincident with the current point.) T (uppercase) indicates that absolute coordinates will follow; t (lowercase) indicates that relative coordinates will follow. At the end of the command, the new current point becomes the final (x,y) coordinate pair used in the polybézier.

Example quad01 shows some simple uses of quadratic Bézier commands within a path. Note that the control point for the "T" command is computed automatically as the reflection of the control point for the previous "Q" command relative to the start point of the "T" command.

Example quad01

View this example as SVG (SVG-enabled browsers only)

8.3.8 The elliptical arc curve commands

The elliptical arc commands are as follows:

Command	Name	Parameters	Description
A (absolute) a (relative)	elliptical arc	(rx ry x-axis-rotation large-arc-flag sweep-flag x y)+	Draws an elliptical arc from the current point to (x, y). The size and orientation of the ellipse are defined by two radii (rx, ry) and anx-axis-rotation, which indicates how the ellipse as a whole is rotated relative to the current coordinate system. The center (cx,cy) of the ellipse is calculated automatically to satisfy the constraints imposed by the other parameters. large-arc-flag andsweep-flag contribute to the automatic calculations and help determine how the arc is drawn.

Example arcs01 shows some simple uses of arc commands within a path.

Example arcs01

View this example as SVG (SVG-enabled browsers only)

The elliptical arc command draws a section of an ellipse which meets the following constraints:

the arc starts at the current point
the arc ends at point (x,y)
the ellipse has the two radii (rx,ry)
the x-axis of the ellipse is rotated byx-axis-rotation relative to the x-axis of the current coordinate system. For most situations, there are actually four different arcs (two different ellipses, each with two different arc sweeps) that satisfy these constraints. large-arc-flag and sweep-flag indicate which one of the four arcs are drawn, as follows:
Of the four candidate arc sweeps, two will represent an arc sweep of greater than or equal to 180 degrees (the "large-arc"), and two will represent an arc sweep of less than or equal to 180 degrees (the "small-arc"). Iflarge-arc-flag is '1', then one of the two larger arc sweeps will be chosen; otherwise, iflarge-arc-flag is '0', one of the smaller arc sweeps will be chosen,
If sweep-flag is '1', then the arc will be drawn in a "positive-angle" direction (i.e., the ellipse formula x=cx+rx*cos(theta) and y=cy+ry*sin(theta) is evaluated such that theta starts at an angle corresponding to the current point and increases positively until the arc reaches (x,y)). A value of 0 causes the arc to be drawn in a "negative-angle" direction (i.e., theta starts at an angle value corresponding to the current point and decreases until the arc reaches (x,y)).

The following illustrates the four combinations oflarge-arc-flag and sweep-flag and the four different arcs that will be drawn based on the values of these flags. For each case, the following path data command was used:

where "?,?" is replaced by "0,0" "0,1" "1,0" and "1,1" to generate the four possible cases.

Illustration of flags in arc commands

View this example as SVG (SVG-enabled browsers only)

Refer to Elliptical arc implementation notes for detailed implementation notes for the path data elliptical arc commands.

8.3.9 The grammar for path data

The following notation is used in the Backus-Naur Form (BNF) description of the grammar for path data:

*: 0 or more
+: 1 or more
?: 0 or 1
(): grouping
|: separates alternatives
double quotes surround literals

The following is the BNF for SVG paths.

svg-path: wsp* moveto-drawto-command-groups? wsp* moveto-drawto-command-groups: moveto-drawto-command-group | moveto-drawto-command-group wsp* moveto-drawto-command-groups moveto-drawto-command-group: moveto wsp* drawto-commands? drawto-commands: drawto-command | drawto-command wsp* drawto-commands drawto-command: closepath | lineto | horizontal-lineto | vertical-lineto | curveto | smooth-curveto | quadratic-bezier-curveto | smooth-quadratic-bezier-curveto | elliptical-arc moveto: ( "M" | "m" ) wsp* moveto-argument-sequence moveto-argument-sequence: coordinate-pair | coordinate-pair comma-wsp? lineto-argument-sequence closepath: ("Z" | "z") lineto: ( "L" | "l" ) wsp* lineto-argument-sequence lineto-argument-sequence: coordinate-pair | coordinate-pair comma-wsp? lineto-argument-sequence horizontal-lineto: ( "H" | "h" ) wsp* horizontal-lineto-argument-sequence horizontal-lineto-argument-sequence: coordinate | coordinate comma-wsp? horizontal-lineto-argument-sequence vertical-lineto: ( "V" | "v" ) wsp* vertical-lineto-argument-sequence vertical-lineto-argument-sequence: coordinate | coordinate comma-wsp? vertical-lineto-argument-sequence curveto: ( "C" | "c" ) wsp* curveto-argument-sequence curveto-argument-sequence: curveto-argument | curveto-argument comma-wsp? curveto-argument-sequence curveto-argument: coordinate-pair comma-wsp? coordinate-pair comma-wsp? coordinate-pair smooth-curveto: ( "S" | "s" ) wsp* smooth-curveto-argument-sequence smooth-curveto-argument-sequence: smooth-curveto-argument | smooth-curveto-argument comma-wsp? smooth-curveto-argument-sequence smooth-curveto-argument: coordinate-pair comma-wsp? coordinate-pair quadratic-bezier-curveto: ( "Q" | "q" ) wsp* quadratic-bezier-curveto-argument-sequence quadratic-bezier-curveto-argument-sequence: quadratic-bezier-curveto-argument | quadratic-bezier-curveto-argument comma-wsp? quadratic-bezier-curveto-argument-sequence quadratic-bezier-curveto-argument: coordinate-pair comma-wsp? coordinate-pair smooth-quadratic-bezier-curveto: ( "T" | "t" ) wsp* smooth-quadratic-bezier-curveto-argument-sequence smooth-quadratic-bezier-curveto-argument-sequence: coordinate-pair | coordinate-pair comma-wsp? smooth-quadratic-bezier-curveto-argument-sequence elliptical-arc: ( "A" | "a" ) wsp* elliptical-arc-argument-sequence elliptical-arc-argument-sequence: elliptical-arc-argument | elliptical-arc-argument comma-wsp? elliptical-arc-argument-sequence elliptical-arc-argument: nonnegative-number comma-wsp? nonnegative-number comma-wsp? number comma-wsp flag comma-wsp flag comma-wsp coordinate-pair coordinate-pair: coordinate comma-wsp? coordinate coordinate: number nonnegative-number: integer-constant | floating-point-constant number: sign? integer-constant | sign? floating-point-constant flag: "0" | "1" comma-wsp: (wsp+ comma? wsp*) | (comma wsp*) comma: "," integer-constant: digit-sequence floating-point-constant: fractional-constant exponent? | digit-sequence exponent fractional-constant: digit-sequence? "." digit-sequence | digit-sequence "." exponent: ( "e" | "E" ) sign? digit-sequence sign: "+" | "-" digit-sequence: digit | digit digit-sequence digit: "0" | "1" | "2" | "3" | "4" | "5" | "6" | "7" | "8" | "9" wsp: (#x20 | #x9 | #xD | #xA)

The processing of the BNF must consume as much of a given BNF production as possible, stopping at the point when a character is encountered which no longer satisfies the production. Thus, in the string "M 100-200", the first coordinate for the "moveto" consumes the characters "100" and stops upon encountering the minus sign because the minus sign cannot follow a digit in the production of a "coordinate". The result is that the first coordinate will be "100" and the second coordinate will be "-200".

Similarly, for the string "M 0.6.5", the first coordinate of the "moveto" consumes the characters "0.6" and stops upon encountering the second decimal point because the production of a "coordinate" only allows one decimal point. The result is that the first coordinate will be "0.6" and the second coordinate will be ".5".

Note that the BNF allows the path 'd' attribute to be empty. This is not an error, instead it disables rendering of the path.

8.4 Distance along a path

Various operations, including text on a path and motion animation and various stroke operations, require that the user agent compute the distance along the geometry of a graphics element, such as a'path'.

Exact mathematics exist for computing distance along a path, but the formulas are highly complex and require substantial computation. It is recommended that authoring products and user agents employ algorithms that produce as precise results as possible; however, to accommodate implementation differences and to help distance calculations produce results that approximate author intent, the pathLength attribute can be used to provide the author's computation of the total length of the path so that the user agent can scale distance-along-a-path computations by the ratio of pathLength to the user agent's own computed value for total path length.

A "moveto" operation within a 'path' element is defined to have zero length. Only the various "lineto", "curveto" and "arcto" commands contribute to path length calculations.

8.5 DOM interfaces

The following interfaces are defined below: SVGPathSeg, SVGPathSegClosePath,SVGPathSegMovetoAbs,SVGPathSegMovetoRel,SVGPathSegLinetoAbs,SVGPathSegLinetoRel,SVGPathSegCurvetoCubicAbs,SVGPathSegCurvetoCubicRel,SVGPathSegCurvetoQuadraticAbs,SVGPathSegCurvetoQuadraticRel,SVGPathSegArcAbs, SVGPathSegArcRel, SVGPathSegLinetoHorizontalAbs,SVGPathSegLinetoHorizontalRel,SVGPathSegLinetoVerticalAbs,SVGPathSegLinetoVerticalRel,SVGPathSegCurvetoCubicSmoothAbs,SVGPathSegCurvetoCubicSmoothRel,SVGPathSegCurvetoQuadraticSmoothAbs,SVGPathSegCurvetoQuadraticSmoothRel,SVGPathSegList, SVGAnimatedPathData,SVGPathElement.

Interface SVGPathSeg

The SVGPathSeg interface is a base interface that corresponds to a single command within a path data specification.

IDL Definition

interface SVGPathSeg { // Path Segment Types const unsigned short PATHSEG_UNKNOWN = 0; const unsigned short PATHSEG_CLOSEPATH = 1; const unsigned short PATHSEG_MOVETO_ABS = 2; const unsigned short PATHSEG_MOVETO_REL = 3; const unsigned short PATHSEG_LINETO_ABS = 4; const unsigned short PATHSEG_LINETO_REL = 5; const unsigned short PATHSEG_CURVETO_CUBIC_ABS = 6; const unsigned short PATHSEG_CURVETO_CUBIC_REL = 7; const unsigned short PATHSEG_CURVETO_QUADRATIC_ABS = 8; const unsigned short PATHSEG_CURVETO_QUADRATIC_REL = 9; const unsigned short PATHSEG_ARC_ABS = 10; const unsigned short PATHSEG_ARC_REL = 11; const unsigned short PATHSEG_LINETO_HORIZONTAL_ABS = 12; const unsigned short PATHSEG_LINETO_HORIZONTAL_REL = 13; const unsigned short PATHSEG_LINETO_VERTICAL_ABS = 14; const unsigned short PATHSEG_LINETO_VERTICAL_REL = 15; const unsigned short PATHSEG_CURVETO_CUBIC_SMOOTH_ABS = 16; const unsigned short PATHSEG_CURVETO_CUBIC_SMOOTH_REL = 17; const unsigned short PATHSEG_CURVETO_QUADRATIC_SMOOTH_ABS = 18; const unsigned short PATHSEG_CURVETO_QUADRATIC_SMOOTH_REL = 19; readonly attribute unsigned short pathSegType; readonly attribute DOMString pathSegTypeAsLetter; };

Definition group Path Segment Types

Defined constants

| PATHSEG_UNKNOWN | ---------------------------------------- | PATHSEG_CLOSEPATH | PATHSEG_MOVETO_ABS | PATHSEG_MOVETO_REL | PATHSEG_LINETO_ABS | PATHSEG_LINETO_REL | PATHSEG_CURVETO_CUBIC_ABS | PATHSEG_CURVETO_CUBIC_REL | PATHSEG_CURVETO_QUADRATIC_ABS | PATHSEG_CURVETO_QUADRATIC_REL | PATHSEG_ARC_ABS | PATHSEG_ARC_REL | PATHSEG_LINETO_HORIZONTAL_ABS | PATHSEG_LINETO_HORIZONTAL_REL | PATHSEG_LINETO_VERTICAL_ABS | PATHSEG_LINETO_VERTICAL_REL | PATHSEG_CURVETO_CUBIC_SMOOTH_ABS | PATHSEG_CURVETO_CUBIC_SMOOTH_REL | PATHSEG_CURVETO_QUADRATIC_SMOOTH_ABS | | PATHSEG_CURVETO_QUADRATIC_SMOOTH_REL | | | The unit type is not one of predefined types. It is invalid to attempt to define a new value of this type or to attempt to switch an existing value to this type. | | | ----------------------------------------------------------------------------------------------------------------------------------------------------------------- | | | Corresponds to a "closepath" (z) path data command. | | | Corresponds to an "absolute moveto" (M) path data command. | | | Corresponds to a "relative moveto" (m) path data command. | | | Corresponds to an "absolute lineto" (L) path data command. | | | Corresponds to a "relative lineto" (l) path data command. | | | Corresponds to an "absolute cubic Bézier curveto" (C) path data command. | | | Corresponds to a "relative cubic Bézier curveto" (c) path data command. | | | Corresponds to an "absolute quadratic Bézier curveto" (Q) path data command. | | | Corresponds to a "relative quadratic Bézier curveto" (q) path data command. | | | Corresponds to an "absolute arcto" (A) path data command. | | | Corresponds to a "relative arcto" (a) path data command. | | | Corresponds to an "absolute horizontal lineto" (H) path data command. | | | Corresponds to a "relative horizontal lineto" (h) path data command. | | | Corresponds to an "absolute vertical lineto" (V) path data command. | | | Corresponds to a "relative vertical lineto" (v) path data command. | | | Corresponds to an "absolute smooth cubic curveto" (S) path data command. | | | Corresponds to a "relative smooth cubic curveto" (s) path data command. | | Corresponds to an "absolute smooth quadratic curveto" (T) path data command. | | Corresponds to a "relative smooth quadratic curveto" (t) path data command. |

Attributes

readonly unsigned short pathSegType

The type of the path segment as specified by one of the constants specified above.

readonly DOMString pathSegTypeAsLetter

The type of the path segment, specified by the corresponding one character command name.

Interface SVGPathSegClosePath

The SVGPathSegClosePath interface corresponds to a "closepath" (z) path data command.

IDL Definition

interface SVGPathSegClosePath : SVGPathSeg {};

Interface SVGPathSegMovetoAbs

The SVGPathSegMovetoAbs interface corresponds to an "absolute moveto" (M) path data command.

IDL Definition

interface SVGPathSegMovetoAbs : SVGPathSeg { attribute float x; // raises DOMException on setting attribute float y; // raises DOMException on setting };

Attributes

float x

The absolute X coordinate for the end point of this path segment.

Exceptions on setting

| DOMException | | NO_MODIFICATION_ALLOWED_ERR: Raised on an attempt to change the value of a readonly attribute. | | ------------ | | ------------------------------------------------------------------------------------------------- |

float y

The absolute Y coordinate for the end point of this path segment.

Exceptions on setting

Interface SVGPathSegMovetoRel

The SVGPathSegMovetoRel interface corresponds to an "relative moveto" (m) path data command.

IDL Definition

interface SVGPathSegMovetoRel : SVGPathSeg { attribute float x; // raises DOMException on setting attribute float y; // raises DOMException on setting };

Attributes

float x

The relative X coordinate for the end point of this path segment.

Exceptions on setting

float y

The relative Y coordinate for the end point of this path segment.

Exceptions on setting

Interface SVGPathSegLinetoAbs

The SVGPathSegLinetoAbs interface corresponds to an "absolute lineto" (L) path data command.

IDL Definition

interface SVGPathSegLinetoAbs : SVGPathSeg { attribute float x; // raises DOMException on setting attribute float y; // raises DOMException on setting };

Attributes

float x

The absolute X coordinate for the end point of this path segment.

Exceptions on setting

float y

The absolute Y coordinate for the end point of this path segment.

Exceptions on setting

Interface SVGPathSegLinetoRel

The SVGPathSegLinetoRel interface corresponds to an "relative lineto" (l) path data command.

IDL Definition

interface SVGPathSegLinetoRel : SVGPathSeg { attribute float x; // raises DOMException on setting attribute float y; // raises DOMException on setting };

Attributes

float x

The relative X coordinate for the end point of this path segment.

Exceptions on setting

float y

The relative Y coordinate for the end point of this path segment.

Exceptions on setting

Interface SVGPathSegCurvetoCubicAbs

The SVGPathSegCurvetoCubicAbs interface corresponds to an "absolute cubic Bézier curveto" (C) path data command.

IDL Definition

interface SVGPathSegCurvetoCubicAbs : SVGPathSeg { attribute float x; // raises DOMException on setting attribute float y; // raises DOMException on setting attribute float x1; // raises DOMException on setting attribute float y1; // raises DOMException on setting attribute float x2; // raises DOMException on setting attribute float y2; // raises DOMException on setting };

Attributes

float x

The absolute X coordinate for the end point of this path segment.

Exceptions on setting

float y

The absolute Y coordinate for the end point of this path segment.

Exceptions on setting

float x1

The absolute X coordinate for the first control point.

Exceptions on setting

float y1

The absolute Y coordinate for the first control point.

Exceptions on setting

float x2

The absolute X coordinate for the second control point.

Exceptions on setting

float y2

The absolute Y coordinate for the second control point.

Exceptions on setting

Interface SVGPathSegCurvetoCubicRel

The SVGPathSegCurvetoCubicRel interface corresponds to a "relative cubic Bézier curveto" (c) path data command.

IDL Definition

interface SVGPathSegCurvetoCubicRel : SVGPathSeg { attribute float x; // raises DOMException on setting attribute float y; // raises DOMException on setting attribute float x1; // raises DOMException on setting attribute float y1; // raises DOMException on setting attribute float x2; // raises DOMException on setting attribute float y2; // raises DOMException on setting };

Attributes

float x

The relative X coordinate for the end point of this path segment.

Exceptions on setting

float y

The relative Y coordinate for the end point of this path segment.

Exceptions on setting

float x1

The relative X coordinate for the first control point.

Exceptions on setting

float y1

The relative Y coordinate for the first control point.

Exceptions on setting

float x2

The relative X coordinate for the second control point.

Exceptions on setting

float y2

The relative Y coordinate for the second control point.

Exceptions on setting

Interface SVGPathSegCurvetoQuadraticAbs

The SVGPathSegCurvetoQuadraticAbs interface corresponds to an "absolute quadratic Bézier curveto" (Q) path data command.

IDL Definition

interface SVGPathSegCurvetoQuadraticAbs : SVGPathSeg { attribute float x; // raises DOMException on setting attribute float y; // raises DOMException on setting attribute float x1; // raises DOMException on setting attribute float y1; // raises DOMException on setting };

Attributes

float x

The absolute X coordinate for the end point of this path segment.

Exceptions on setting

float y

The absolute Y coordinate for the end point of this path segment.

Exceptions on setting

float x1

The absolute X coordinate for the control point.

Exceptions on setting

float y1

The absolute Y coordinate for the control point.

Exceptions on setting

Interface SVGPathSegCurvetoQuadraticRel

The SVGPathSegCurvetoQuadraticRel interface corresponds to a "relative quadratic Bézier curveto" (q) path data command.

IDL Definition

interface SVGPathSegCurvetoQuadraticRel : SVGPathSeg { attribute float x; // raises DOMException on setting attribute float y; // raises DOMException on setting attribute float x1; // raises DOMException on setting attribute float y1; // raises DOMException on setting };

Attributes

float x

The relative X coordinate for the end point of this path segment.

Exceptions on setting

float y

The relative Y coordinate for the end point of this path segment.

Exceptions on setting

float x1

The relative X coordinate for the control point.

Exceptions on setting

float y1

The relative Y coordinate for the control point.

Exceptions on setting

Interface SVGPathSegArcAbs

The SVGPathSegArcAbs interface corresponds to an "absolute arcto" (A) path data command.

IDL Definition

interface SVGPathSegArcAbs : SVGPathSeg { attribute float x; // raises DOMException on setting attribute float y; // raises DOMException on setting attribute float r1; // raises DOMException on setting attribute float r2; // raises DOMException on setting attribute float angle; // raises DOMException on setting attribute boolean largeArcFlag; // raises DOMException on setting attribute boolean sweepFlag; // raises DOMException on setting };

Attributes

float x

The absolute X coordinate for the end point of this path segment.

Exceptions on setting

float y

The absolute Y coordinate for the end point of this path segment.

Exceptions on setting

float r1

The x-axis radius for the ellipse (i.e., r1).

Exceptions on setting

float r2

The y-axis radius for the ellipse (i.e., r2).

Exceptions on setting

float angle

The rotation angle in degrees for the ellipse's x-axis relative to the x-axis of the user coordinate system.

Exceptions on setting

boolean largeArcFlag

The value of the large-arc-flag parameter.

Exceptions on setting

boolean sweepFlag

The value of the sweep-flag parameter.

Exceptions on setting

Interface SVGPathSegArcRel

The SVGPathSegArcRel interface corresponds to a "relative arcto" (a) path data command.

IDL Definition

interface SVGPathSegArcRel : SVGPathSeg { attribute float x; // raises DOMException on setting attribute float y; // raises DOMException on setting attribute float r1; // raises DOMException on setting attribute float r2; // raises DOMException on setting attribute float angle; // raises DOMException on setting attribute boolean largeArcFlag; // raises DOMException on setting attribute boolean sweepFlag; // raises DOMException on setting };

Attributes

float x

The relative X coordinate for the end point of this path segment.

Exceptions on setting

float y

The relative Y coordinate for the end point of this path segment.

Exceptions on setting

float r1

The x-axis radius for the ellipse (i.e., r1).

Exceptions on setting

float r2

The y-axis radius for the ellipse (i.e., r2).

Exceptions on setting

float angle

The rotation angle in degrees for the ellipse's x-axis relative to the x-axis of the user coordinate system.

Exceptions on setting

boolean largeArcFlag

The value of the large-arc-flag parameter.

Exceptions on setting

boolean sweepFlag

The value of the sweep-flag parameter.

Exceptions on setting

Interface SVGPathSegLinetoHorizontalAbs

The SVGPathSegLinetoHorizontalAbs interface corresponds to an "absolute horizontal lineto" (H) path data command.

IDL Definition

interface SVGPathSegLinetoHorizontalAbs : SVGPathSeg { attribute float x; // raises DOMException on setting };

Attributes

float x

The absolute X coordinate for the end point of this path segment.

Exceptions on setting

Interface SVGPathSegLinetoHorizontalRel

The SVGPathSegLinetoHorizontalRel interface corresponds to a "relative horizontal lineto" (h) path data command.

IDL Definition

interface SVGPathSegLinetoHorizontalRel : SVGPathSeg { attribute float x; // raises DOMException on setting };

Attributes

float x

The relative X coordinate for the end point of this path segment.

Exceptions on setting

Interface SVGPathSegLinetoVerticalAbs

The SVGPathSegLinetoVerticalAbs interface corresponds to an "absolute vertical lineto" (V) path data command.

IDL Definition

interface SVGPathSegLinetoVerticalAbs : SVGPathSeg { attribute float y; // raises DOMException on setting };

Attributes

float y

The absolute Y coordinate for the end point of this path segment.

Exceptions on setting

Interface SVGPathSegLinetoVerticalRel

The SVGPathSegLinetoVerticalRel interface corresponds to a "relative vertical lineto" (v) path data command.

IDL Definition

interface SVGPathSegLinetoVerticalRel : SVGPathSeg { attribute float y; // raises DOMException on setting };

Attributes

float y

The relative Y coordinate for the end point of this path segment.

Exceptions on setting

Interface SVGPathSegCurvetoCubicSmoothAbs

The SVGPathSegCurvetoCubicSmoothAbs interface corresponds to an "absolute smooth cubic curveto" (S) path data command.

IDL Definition

interface SVGPathSegCurvetoCubicSmoothAbs : SVGPathSeg { attribute float x; // raises DOMException on setting attribute float y; // raises DOMException on setting attribute float x2; // raises DOMException on setting attribute float y2; // raises DOMException on setting };

Attributes

float x

The absolute X coordinate for the end point of this path segment.

Exceptions on setting

float y

The absolute Y coordinate for the end point of this path segment.

Exceptions on setting

float x2

The absolute X coordinate for the second control point.

Exceptions on setting

float y2

The absolute Y coordinate for the second control point.

Exceptions on setting

Interface SVGPathSegCurvetoCubicSmoothRel

The SVGPathSegCurvetoCubicSmoothRel interface corresponds to a "relative smooth cubic curveto" (s) path data command.

IDL Definition

interface SVGPathSegCurvetoCubicSmoothRel : SVGPathSeg { attribute float x; // raises DOMException on setting attribute float y; // raises DOMException on setting attribute float x2; // raises DOMException on setting attribute float y2; // raises DOMException on setting };

Attributes

float x

The relative X coordinate for the end point of this path segment.

Exceptions on setting

float y

The relative Y coordinate for the end point of this path segment.

Exceptions on setting

float x2

The relative X coordinate for the second control point.

Exceptions on setting

float y2

The relative Y coordinate for the second control point.

Exceptions on setting

Interface SVGPathSegCurvetoQuadraticSmoothAbs

The SVGPathSegCurvetoQuadraticSmoothAbs interface corresponds to an "absolute smooth quadratic curveto" (T) path data command.

IDL Definition

interface SVGPathSegCurvetoQuadraticSmoothAbs : SVGPathSeg { attribute float x; // raises DOMException on setting attribute float y; // raises DOMException on setting };

Attributes

float x

The absolute X coordinate for the end point of this path segment.

Exceptions on setting

float y

The absolute Y coordinate for the end point of this path segment.

Exceptions on setting

Interface SVGPathSegCurvetoQuadraticSmoothRel

The SVGPathSegCurvetoQuadraticSmoothRel interface corresponds to a "relative smooth quadratic curveto" (t) path data command.

IDL Definition

interface SVGPathSegCurvetoQuadraticSmoothRel : SVGPathSeg { attribute float x; // raises DOMException on setting attribute float y; // raises DOMException on setting };

Attributes

float x

The relative X coordinate for the end point of this path segment.

Exceptions on setting

float y

The relative Y coordinate for the end point of this path segment.

Exceptions on setting

Interface SVGPathSegList

This interface defines a list of SVGPathSeg objects.

SVGPathSegList has the same attributes and methods as other SVGxxxList interfaces. Implementers may consider using a single base class to implement the various SVGxxxList interfaces.

IDL Definition

interface SVGPathSegList { readonly attribute unsigned long numberOfItems; void clear ( ) raises( DOMException ); SVGPathSeg initialize ( in SVGPathSeg newItem ) raises( DOMException, SVGException ); SVGPathSeg getItem ( in unsigned long index ) raises( DOMException ); SVGPathSeg insertItemBefore ( in SVGPathSeg newItem, in unsigned long index ) raises( DOMException, SVGException ); SVGPathSeg replaceItem ( in SVGPathSeg newItem, in unsigned long index ) raises( DOMException, SVGException ); SVGPathSeg removeItem ( in unsigned long index ) raises( DOMException ); SVGPathSeg appendItem ( in SVGPathSeg newItem ) raises( DOMException, SVGException ); };

Attributes

readonly unsigned long numberOfItems

The number of items in the list.

Methods

clear

Clears all existing current items from the list, with the result being an empty list.

No Parameters

No Return Value

Exceptions

| DOMException | | NO_MODIFICATION_ALLOWED_ERR: Raised when the list cannot be modified. | | ------------ | | ------------------------------------------------------------------------ |

initialize

Clears all existing current items from the list and re-initializes the list to hold the single item specified by the parameter.

Parameters

| in SVGPathSeg newItem | | The item which should become the only member of the list. | | --------------------- | | --------------------------------------------------------- |

Return value

| SVGPathSeg | | The item being inserted into the list. | | ---------- | | -------------------------------------- |

Exceptions

| DOMException | | NO_MODIFICATION_ALLOWED_ERR: Raised when the list cannot be modified. | | ------------ | | -------------------------------------------------------------------------------------------------- | | SVGException | | SVG_WRONG_TYPE_ERR: Raised if parameter newItem is the wrong type of object for the given list. |

getItem

Returns the specified item from the list.

Parameters

| in unsigned long index | | The index of the item from the list which is to be returned. The first item is number 0. | | ---------------------- | | ---------------------------------------------------------------------------------------- |

Return value

| SVGPathSeg | | The selected item. | | ---------- | | ------------------ |

Exceptions

| DOMException | | INDEX_SIZE_ERR: Raised if the index number is negative or greater than or equal to numberOfItems. | | ------------ | | --------------------------------------------------------------------------------------------------- |

insertItemBefore

Inserts a new item into the list at the specified position. The first item is number 0. If newItem is already in a list, it is removed from its previous list before it is inserted into this list.

Parameters

| in SVGPathSeg newItem | | The item which is to be inserted into the list. | | ---------------------- | | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | | in unsigned long index | | The index of the item before which the new item is to be inserted. The first item is number 0. If the index is equal to 0, then the new item is inserted at the front of the list. If the index is greater than or equal to numberOfItems, then the new item is appended to the end of the list. |

Return value

| SVGPathSeg | | The inserted item. | | ---------- | | ------------------ |

Exceptions

replaceItem

Replaces an existing item in the list with a new item. If newItem is already in a list, it is removed from its previous list before it is inserted into this list.

Parameters

Return value

| SVGPathSeg | | The inserted item. | | ---------- | | ------------------ |

Exceptions

| DOMException | | NO_MODIFICATION_ALLOWED_ERR: Raised when the list cannot be modified. INDEX_SIZE_ERR: Raised if the index number is negative or greater than or equal to numberOfItems. | | ------------ | | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | | SVGException | | SVG_WRONG_TYPE_ERR: Raised if parameter newItem is the wrong type of object for the given list. |

removeItem

Removes an existing item from the list.

Parameters

| in unsigned long index | | The index of the item which is to be removed. The first item is number 0. | | ---------------------- | | ------------------------------------------------------------------------- |

Return value

| SVGPathSeg | | The removed item. | | ---------- | | ----------------- |

Exceptions

appendItem

Inserts a new item at the end of the list. If newItem is already in a list, it is removed from its previous list before it is inserted into this list.

Parameters

| in SVGPathSeg newItem | | The item which is to be inserted into the list. The first item is number 0. | | --------------------- | | --------------------------------------------------------------------------- |

Return value

| SVGPathSeg | | The inserted item. | | ---------- | | ------------------ |

Exceptions

Interface SVGAnimatedPathData

The SVGAnimatedPathData interface supports elements which have a 'd' attribute which holds SVG path data, and supports the ability to animate that attribute.

The SVGAnimatedPathData interface provides two lists to access and modify the base (i.e., static) contents of the d attribute:

DOM attribute pathSegList provides access to the static/base contents of the d attribute in a form which matches one-for-one with SVG's syntax.
DOM attribute normalizedPathSegList provides normalized access to the static/base contents of the d attribute where all path data commands are expressed in terms of the following subset of SVGPathSeg types: SVG_PATHSEG_MOVETO_ABS (M), SVG_PATHSEG_LINETO_ABS (L), SVG_PATHSEG_CURVETO_CUBIC_ABS (C) and SVG_PATHSEG_CLOSEPATH (z).

and two lists to access the current animated values of thed attribute:

DOM attribute animatedPathSegList provides access to the current animated contents of the d attribute in a form which matches one-for-one with SVG's syntax.
DOM attribute animatedNormalizedPathSegList provides normalized access to the current animated contents of the d attribute where all path data commands are expressed in terms of the following subset of SVGPathSeg types: SVG_PATHSEG_MOVETO_ABS (M), SVG_PATHSEG_LINETO_ABS (L), SVG_PATHSEG_CURVETO_CUBIC_ABS (C) and SVG_PATHSEG_CLOSEPATH (z).

Each of the two lists are always kept synchronized. Modifications to one list will immediately cause the corresponding list to be modified. Modifications to normalizedPathSegList might cause entries in pathSegList to be broken into a set of normalized path segments.

Additionally, the 'd' attribute on the 'path' element accessed via the XML DOM (e.g., using the getAttribute() method call) will reflect any changes made to pathSegList or normalizedPathSegList.

IDL Definition

interface SVGAnimatedPathData { readonly attribute SVGPathSegList pathSegList; readonly attribute SVGPathSegList normalizedPathSegList; readonly attribute SVGPathSegList animatedPathSegList; readonly attribute SVGPathSegList animatedNormalizedPathSegList; };

Attributes

readonly SVGPathSegList pathSegList

Provides access to the base (i.e., static) contents of the d attribute in a form which matches one-for-one with SVG's syntax. Thus, if the d attribute has an "absolute moveto (M)" and an "absolute arcto (A)" command, then pathSegList will have two entries: a SVG_PATHSEG_MOVETO_ABS and a SVG_PATHSEG_ARC_ABS.

readonly SVGPathSegList normalizedPathSegList

Provides access to the base (i.e., static) contents of the d attribute in a form where all path data commands are expressed in terms of the following subset of SVGPathSeg types: SVG_PATHSEG_MOVETO_ABS (M), SVG_PATHSEG_LINETO_ABS (L), SVG_PATHSEG_CURVETO_CUBIC_ABS (C) and SVG_PATHSEG_CLOSEPATH (z). Thus, if the d attribute has an "absolute moveto (M)" and an "absolute arcto (A)" command, thenpathSegList will have one SVG_PATHSEG_MOVETO_ABS entry followed by a series of SVG_PATHSEG_LINETO_ABS entries which approximate the arc. This alternate representation is available to provide a simpler interface to developers who would benefit from a more limited set of commands.

The only valid SVGPathSeg types are SVG_PATHSEG_MOVETO_ABS (M), SVG_PATHSEG_LINETO_ABS (L), SVG_PATHSEG_CURVETO_CUBIC_ABS (C) and SVG_PATHSEG_CLOSEPATH (z).

readonly SVGPathSegList animatedPathSegList

Provides access to the current animated contents of the d attribute in a form which matches one-for-one with SVG's syntax. If the given attribute or property is being animated, contains the current animated value of the attribute or property, and both the object itself and its contents are readonly. If the given attribute or property is not currently being animated, contains the same value as 'pathSegList'.

readonly SVGPathSegList animatedNormalizedPathSegList

Provides access to the current animated contents of the d attribute in a form where all path data commands are expressed in terms of the following subset of SVGPathSeg types: SVG_PATHSEG_MOVETO_ABS (M), SVG_PATHSEG_LINETO_ABS (L), SVG_PATHSEG_CURVETO_CUBIC_ABS (C) and SVG_PATHSEG_CLOSEPATH (z). If the given attribute or property is being animated, contains the current animated value of the attribute or property, and both the object itself and its contents are readonly. If the given attribute or property is not currently being animated, contains the same value as 'normalizedPathSegList'.

Interface SVGPathElement

The SVGPathElement interface corresponds to the 'path' element.

IDL Definition

interface SVGPathElement : SVGElement, SVGTests, SVGLangSpace, SVGExternalResourcesRequired, SVGStylable, SVGTransformable, events::EventTarget, SVGAnimatedPathData { readonly attribute SVGAnimatedNumber pathLength; float getTotalLength ( ); SVGPoint getPointAtLength ( in float distance ); unsigned long getPathSegAtLength ( in float distance ); SVGPathSegClosePath createSVGPathSegClosePath ( ); SVGPathSegMovetoAbs createSVGPathSegMovetoAbs ( in float x, in float y ); SVGPathSegMovetoRel createSVGPathSegMovetoRel ( in float x, in float y ); SVGPathSegLinetoAbs createSVGPathSegLinetoAbs ( in float x, in float y ); SVGPathSegLinetoRel createSVGPathSegLinetoRel ( in float x, in float y ); SVGPathSegCurvetoCubicAbs createSVGPathSegCurvetoCubicAbs ( in float x, in float y, in float x1, in float y1, in float x2, in float y2 ); SVGPathSegCurvetoCubicRel createSVGPathSegCurvetoCubicRel ( in float x, in float y, in float x1, in float y1, in float x2, in float y2 ); SVGPathSegCurvetoQuadraticAbs createSVGPathSegCurvetoQuadraticAbs ( in float x, in float y, in float x1, in float y1 ); SVGPathSegCurvetoQuadraticRel createSVGPathSegCurvetoQuadraticRel ( in float x, in float y, in float x1, in float y1 ); SVGPathSegArcAbs createSVGPathSegArcAbs ( in float x, in float y, in float r1, in float r2, in float angle, in boolean largeArcFlag, in boolean sweepFlag ); SVGPathSegArcRel createSVGPathSegArcRel ( in float x, in float y, in float r1, in float r2, in float angle, in boolean largeArcFlag, in boolean sweepFlag ); SVGPathSegLinetoHorizontalAbs createSVGPathSegLinetoHorizontalAbs ( in float x ); SVGPathSegLinetoHorizontalRel createSVGPathSegLinetoHorizontalRel ( in float x ); SVGPathSegLinetoVerticalAbs createSVGPathSegLinetoVerticalAbs ( in float y ); SVGPathSegLinetoVerticalRel createSVGPathSegLinetoVerticalRel ( in float y ); SVGPathSegCurvetoCubicSmoothAbs createSVGPathSegCurvetoCubicSmoothAbs ( in float x, in float y, in float x2, in float y2 ); SVGPathSegCurvetoCubicSmoothRel createSVGPathSegCurvetoCubicSmoothRel ( in float x, in float y, in float x2, in float y2 ); SVGPathSegCurvetoQuadraticSmoothAbs createSVGPathSegCurvetoQuadraticSmoothAbs ( in float x, in float y ); SVGPathSegCurvetoQuadraticSmoothRel createSVGPathSegCurvetoQuadraticSmoothRel ( in float x, in float y ); };

Attributes

readonly SVGAnimatedNumber pathLength

Corresponds to attribute pathLength on the given 'path' element.

Methods

getTotalLength

Returns the user agent's computed value for the total length of the path using the user agent's distance-along-a-path algorithm, as a distance in the current user coordinate system.

No Parameters

Return value

| float | | The total length of the path. | | ----- | | ----------------------------- |

No Exceptions

getPointAtLength

Returns the (x,y) coordinate in user space which isdistance units along the path, utilizing the user agent's distance-along-a-path algorithm.

Parameters

| in float distance | | The distance along the path, relative to the start of the path, as a distance in the current user coordinate system. | | ----------------- | | -------------------------------------------------------------------------------------------------------------------- |

Return value

| SVGPoint | | The returned point in user space. | | -------- | | --------------------------------- |

No Exceptions

getPathSegAtLength

Returns the index into pathSegList which isdistance units along the path, utilizing the user agent's distance-along-a-path algorithm.

Parameters

Return value

| unsigned long | | The index of the path segment, where the first path segment is number 0. | | ------------- | | ------------------------------------------------------------------------ |

No Exceptions

createSVGPathSegClosePath

Returns a stand-alone, parentless SVGPathSegClosePath object.

No Parameters

Return value

| SVGPathSegClosePath | | A stand-alone, parentless SVGPathSegClosePath object. | | ------------------- | | ----------------------------------------------------- |

No Exceptions

createSVGPathSegMovetoAbs

Returns a stand-alone, parentless SVGPathSegMovetoAbs object.

Parameters

| in float x | | The absolute X coordinate for the end point of this path segment. | | ---------- | | ----------------------------------------------------------------- | | in float y | | The absolute Y coordinate for the end point of this path segment. |

Return value

| SVGPathSegMovetoAbs | | A stand-alone, parentless SVGPathSegMovetoAbs object. | | ------------------- | | ----------------------------------------------------- |

No Exceptions

createSVGPathSegMovetoRel

Returns a stand-alone, parentless SVGPathSegMovetoRel object.

Parameters

| in float x | | The relative X coordinate for the end point of this path segment. | | ---------- | | ----------------------------------------------------------------- | | in float y | | The relative Y coordinate for the end point of this path segment. |

Return value

| SVGPathSegMovetoRel | | A stand-alone, parentless SVGPathSegMovetoRel object. | | ------------------- | | ----------------------------------------------------- |

No Exceptions

createSVGPathSegLinetoAbs

Returns a stand-alone, parentless SVGPathSegLinetoAbs object.

Parameters

Return value

| SVGPathSegLinetoAbs | | A stand-alone, parentless SVGPathSegLinetoAbs object. | | ------------------- | | ----------------------------------------------------- |

No Exceptions

createSVGPathSegLinetoRel

Returns a stand-alone, parentless SVGPathSegLinetoRel object.

Parameters

Return value

| SVGPathSegLinetoRel | | A stand-alone, parentless SVGPathSegLinetoRel object. | | ------------------- | | ----------------------------------------------------- |

No Exceptions

createSVGPathSegCurvetoCubicAbs

Returns a stand-alone, parentless SVGPathSegCurvetoCubicAbs object.

Parameters

| in float x | | The absolute X coordinate for the end point of this path segment. | | ----------- | | ----------------------------------------------------------------- | | in float y | | The absolute Y coordinate for the end point of this path segment. | | in float x1 | | The absolute X coordinate for the first control point. | | in float y1 | | The absolute Y coordinate for the first control point. | | in float x2 | | The absolute X coordinate for the second control point. | | in float y2 | | The absolute Y coordinate for the second control point. |

Return value

| SVGPathSegCurvetoCubicAbs | | A stand-alone, parentless SVGPathSegCurvetoCubicAbs object. | | ------------------------- | | ----------------------------------------------------------- |

No Exceptions

createSVGPathSegCurvetoCubicRel

Returns a stand-alone, parentless SVGPathSegCurvetoCubicRel object.

Parameters

| in float x | | The relative X coordinate for the end point of this path segment. | | ----------- | | ----------------------------------------------------------------- | | in float y | | The relative Y coordinate for the end point of this path segment. | | in float x1 | | The relative X coordinate for the first control point. | | in float y1 | | The relative Y coordinate for the first control point. | | in float x2 | | The relative X coordinate for the second control point. | | in float y2 | | The relative Y coordinate for the second control point. |

Return value

| SVGPathSegCurvetoCubicRel | | A stand-alone, parentless SVGPathSegCurvetoCubicRel object. | | ------------------------- | | ----------------------------------------------------------- |

No Exceptions

createSVGPathSegCurvetoQuadraticAbs

Returns a stand-alone, parentless SVGPathSegCurvetoQuadraticAbs object.

Parameters

| in float x | | The absolute X coordinate for the end point of this path segment. | | ----------- | | ----------------------------------------------------------------- | | in float y | | The absolute Y coordinate for the end point of this path segment. | | in float x1 | | The absolute X coordinate for the control point. | | in float y1 | | The absolute Y coordinate for the control point. |

Return value

| SVGPathSegCurvetoQuadraticAbs | | A stand-alone, parentless SVGPathSegCurvetoQuadraticAbs object. | | ----------------------------- | | --------------------------------------------------------------- |

No Exceptions

createSVGPathSegCurvetoQuadraticRel

Returns a stand-alone, parentless SVGPathSegCurvetoQuadraticRel object.

Parameters

| in float x | | The relative X coordinate for the end point of this path segment. | | ----------- | | ----------------------------------------------------------------- | | in float y | | The relative Y coordinate for the end point of this path segment. | | in float x1 | | The relative X coordinate for the control point. | | in float y1 | | The relative Y coordinate for the control point. |

Return value

| SVGPathSegCurvetoQuadraticRel | | A stand-alone, parentless SVGPathSegCurvetoQuadraticRel object. | | ----------------------------- | | --------------------------------------------------------------- |

No Exceptions

createSVGPathSegArcAbs

Returns a stand-alone, parentless SVGPathSegArcAbs object.

Parameters

| in float x | | The absolute X coordinate for the end point of this path segment. | | ----------------------- | | ------------------------------------------------------------------------------------------------------------ | | in float y | | The absolute Y coordinate for the end point of this path segment. | | in float r1 | | The x-axis radius for the ellipse (i.e., r1). | | in float r2 | | The y-axis radius for the ellipse (i.e., r2). | | in float angle | | The rotation angle in degrees for the ellipse's x-axis relative to the x-axis of the user coordinate system. | | in boolean largeArcFlag | | The value for the large-arc-flag parameter. | | in boolean sweepFlag | | The value for the sweep-flag parameter. |

Return value

| SVGPathSegArcAbs | | A stand-alone, parentless SVGPathSegArcAbs object. | | ---------------- | | -------------------------------------------------- |

No Exceptions

createSVGPathSegArcRel

Returns a stand-alone, parentless SVGPathSegArcRel object.

Parameters

| in float x | | The relative X coordinate for the end point of this path segment. | | ----------------------- | | ------------------------------------------------------------------------------------------------------------ | | in float y | | The relative Y coordinate for the end point of this path segment. | | in float r1 | | The x-axis radius for the ellipse (i.e., r1). | | in float r2 | | The y-axis radius for the ellipse (i.e., r2). | | in float angle | | The rotation angle in degrees for the ellipse's x-axis relative to the x-axis of the user coordinate system. | | in boolean largeArcFlag | | The value for the large-arc-flag parameter. | | in boolean sweepFlag | | The value for the sweep-flag parameter. |

Return value

| SVGPathSegArcRel | | A stand-alone, parentless SVGPathSegArcRel object. | | ---------------- | | -------------------------------------------------- |

No Exceptions

createSVGPathSegLinetoHorizontalAbs

Returns a stand-alone, parentless SVGPathSegLinetoHorizontalAbs object.

Parameters

| in float x | | The absolute X coordinate for the end point of this path segment. | | ---------- | | ----------------------------------------------------------------- |

Return value

| SVGPathSegLinetoHorizontalAbs | | A stand-alone, parentless SVGPathSegLinetoHorizontalAbs object. | | ----------------------------- | | --------------------------------------------------------------- |

No Exceptions

createSVGPathSegLinetoHorizontalRel

Returns a stand-alone, parentless SVGPathSegLinetoHorizontalRel object.

Parameters

| in float x | | The relative X coordinate for the end point of this path segment. | | ---------- | | ----------------------------------------------------------------- |

Return value

| SVGPathSegLinetoHorizontalRel | | A stand-alone, parentless SVGPathSegLinetoHorizontalRel object. | | ----------------------------- | | --------------------------------------------------------------- |

No Exceptions

createSVGPathSegLinetoVerticalAbs

Returns a stand-alone, parentless SVGPathSegLinetoVerticalAbs object.

Parameters

| in float y | | The absolute Y coordinate for the end point of this path segment. | | ---------- | | ----------------------------------------------------------------- |

Return value

| SVGPathSegLinetoVerticalAbs | | A stand-alone, parentless SVGPathSegLinetoVerticalAbs object. | | --------------------------- | | ------------------------------------------------------------- |

No Exceptions

createSVGPathSegLinetoVerticalRel

Returns a stand-alone, parentless SVGPathSegLinetoVerticalRel object.

Parameters

| in float y | | The relative Y coordinate for the end point of this path segment. | | ---------- | | ----------------------------------------------------------------- |

Return value

| SVGPathSegLinetoVerticalRel | | A stand-alone, parentless SVGPathSegLinetoVerticalRel object. | | --------------------------- | | ------------------------------------------------------------- |

No Exceptions

createSVGPathSegCurvetoCubicSmoothAbs

Returns a stand-alone, parentless SVGPathSegCurvetoCubicSmoothAbs object.

Parameters

| in float x | | The absolute X coordinate for the end point of this path segment. | | ----------- | | ----------------------------------------------------------------- | | in float y | | The absolute Y coordinate for the end point of this path segment. | | in float x2 | | The absolute X coordinate for the second control point. | | in float y2 | | The absolute Y coordinate for the second control point. |

Return value

| SVGPathSegCurvetoCubicSmoothAbs | | A stand-alone, parentless SVGPathSegCurvetoCubicSmoothAbs object. | | ------------------------------- | | ----------------------------------------------------------------- |

No Exceptions

createSVGPathSegCurvetoCubicSmoothRel

Returns a stand-alone, parentless SVGPathSegCurvetoCubicSmoothRel object.

Parameters

| in float x | | The relative X coordinate for the end point of this path segment. | | ----------- | | ----------------------------------------------------------------- | | in float y | | The relative Y coordinate for the end point of this path segment. | | in float x2 | | The relative X coordinate for the second control point. | | in float y2 | | The relative Y coordinate for the second control point. |

Return value

| SVGPathSegCurvetoCubicSmoothRel | | A stand-alone, parentless SVGPathSegCurvetoCubicSmoothRel object. | | ------------------------------- | | ----------------------------------------------------------------- |

No Exceptions

createSVGPathSegCurvetoQuadraticSmoothAbs

Returns a stand-alone, parentless SVGPathSegCurvetoQuadraticSmoothAbs object.

Parameters

Return value

| SVGPathSegCurvetoQuadraticSmoothAbs | | A stand-alone, parentless SVGPathSegCurvetoQuadraticSmoothAbs object. | | ----------------------------------- | | --------------------------------------------------------------------- |

No Exceptions

createSVGPathSegCurvetoQuadraticSmoothRel

Returns a stand-alone, parentless SVGPathSegCurvetoQuadraticSmoothRel object.

Parameters

Return value

| SVGPathSegCurvetoQuadraticSmoothRel | | A stand-alone, parentless SVGPathSegCurvetoQuadraticSmoothRel object. | | ----------------------------------- | | --------------------------------------------------------------------- |

No Exceptions

Paths - SVG 1.1 - 20030114 (original) (raw)

Contents

8.1 Introduction

8.2 The 'path' element

8.3 Path data

8.3.1 General information about path data

8.3.2 The "moveto" commands

8.3.3 The "closepath" command

8.3.4 The "lineto" commands

8.3.5 The curve commands

8.3.6 The cubic Bézier curve commands

8.3.7 The quadratic Bézier curve commands

8.3.8 The elliptical arc curve commands

8.3.9 The grammar for path data

8.4 Distance along a path

8.5 DOM interfaces

Interface SVGPathSeg

Interface SVGPathSegClosePath

Interface SVGPathSegMovetoAbs

Interface SVGPathSegMovetoRel

Interface SVGPathSegLinetoAbs

Interface SVGPathSegLinetoRel

Interface SVGPathSegCurvetoCubicAbs

Interface SVGPathSegCurvetoCubicRel

Interface SVGPathSegCurvetoQuadraticAbs

Interface SVGPathSegCurvetoQuadraticRel

Interface SVGPathSegArcAbs

Interface SVGPathSegArcRel

Interface SVGPathSegLinetoHorizontalAbs

Interface SVGPathSegLinetoHorizontalRel

Interface SVGPathSegLinetoVerticalAbs

Interface SVGPathSegLinetoVerticalRel

Interface SVGPathSegCurvetoCubicSmoothAbs

Interface SVGPathSegCurvetoCubicSmoothRel

Interface SVGPathSegCurvetoQuadraticSmoothAbs

Interface SVGPathSegCurvetoQuadraticSmoothRel

Interface SVGPathSegList

Interface SVGAnimatedPathData

Interface SVGPathElement