XHTML+SMIL Profile (original) (raw)

W3C Note 31 January�2002

This version

http://www.w3.org/TR/2002/NOTE-XHTMLplusSMIL-20020131/

Latest version

http://www.w3.org/TR/XHTMLplusSMIL/

Previous version

http://www.w3.org/TR/2001/WD-XHTMLplusSMIL-20010807/

Editors:

Debbie Newman (debbien@microsoft.com), Microsoft
Aaron Patterson, (a-apatt@microsoft.com), Microsoft

Patrick Schmitz (cogit@ludicrum.org), Invited Expert

Copyright�2001, 2002 W3C� (MIT, INRIA, Keio), All Rights Reserved. W3C liability, trademark, document use and software licensing rules apply.

Abstract

The XHTML+SMIL profile defines a set of XHTML abstract modules that support a subset of the SMIL 2.0 specification.� It includes functionality from SMIL 2.0 modules providing support for animation, content control, media objects, timing and synchronization, and transition effects. The profile also integrates SMIL 2.0 features directly with XHTML and CSS, describing how SMIL can be used to manipulate XHTML and CSS features. Additional semantics are defined for some XHTML elements and CSS properties.

The profile is designed for Web clients that support XHTML+SMIL markup validating to this profile's implementation DTD. The document type definition (DTD) and XML Schema [XSCHEMA] are implemented using SMIL modules as defined in "Modularization of SMIL" [SMIL-MOD-NOTE], and "The SMIL 20 Modules" [SMIL20-MOD].

Status of this document

This section describes the status of this document at the time of its publication. Other documents may supersede this document. The latest status of this document series is maintained at the W3C.

This document is a Note submitted to the W3C with the intention that it be used as a basis to further the work of integrating SMIL functionality into XHTML.

This Note has been produced by the SYMM Working Group (members only), and reflects the opinions of some members of that Working Group.

This specification is a revision of the W3C Working Draft XHTML+SMIL Profile available in the early phase but removed from the SMIL2.0 specification.

The authors welcome comments on this document, but they do not guarantee a reply or any further action. Please send comments to www-smil@w3.org. The archive of public comments is available at http://lists.w3.org/Archives/Public/www-smil/. This document may be updated or added to based on implementation experience, but no commitment is made by the W3C, or any of its members, regarding future updates.

This document is a Note made available by the W3C for discussion only. Publication of this Note by W3C indicates no endorsement by W3C or the W3C Team, or any W3C Members. A list of current W3C technical reports and publications, including Working Drafts and Notes, can be found at http://www.w3.org/TR .

Table of Contents

• Introduction
• Normative Definition of XHTML+SMIL
• XHTML+SMIL Profile
• Animation Module
• Content Control Module
• Media Object Module
• Timing and Synchronization Module
• Time Manipulations Module
• Transition Effects Module
• Appendix A: Document Type Definition
• Appendix B: References

1-Introduction

This section is informative.

This profile describes the SMIL modules that are added to XHTML, and details the integration issues, including the application of integrated SMIL modules to CSS styles [CSS20]. Language integration is accomplished with a set of XHTML modules using the semantics defined in XHTML Modularization [XMOD].�The XHTML+SMIL Profile adds timing, animation and multimedia functionality to these XHTML elements. XHTML elements that make up the modules defined in XHTML Modularization [XMOD] �are described in the W3C Recommendation for HTML�4 [HTML4] .

The document type defined by the XHTML+SMIL profile is XHTML Host language document type conformant.

1.1-Motivation and applications

Using the SMIL timing extensions, any XHTML element on which timing functionality is supported can be set to appear at a given time, to last for a specified duration, and to repeat (i.e. loop).�Basic timing and synchronization and functionality is supported with a simple syntax, and more complex timing constructs can be described. Event-based interactive timing is also supported.�

The Animation and Transition modules provide additional support for authors to define presentation content that includes motion, style animation, transition effects and other features commonly found in presentation/multimedia authoring tools and runtimes.

In order to easily integrate time-based media (e.g. video and audio), the SMIL media elements are included. SMIL Content control provides elements and attributes to control alternative (including accessible and internationalized) content.

1.2-Design Rationale

This section explains why certain modules of SMIL 2.0 [SMIL20] are not included. The general philosophy is to use XHTML modules where appropriate, and to include the SMIL modules when they provide essential enhancements.

Layout Module: The SMIL 2.0 layout module is not included. The XHTML/CSS layout model provides layout functionality.

Linking Module: The SMIL 2.0 linking module is not included, as XHTML provides linking functionality.

Structure Module: The SMIL 2.0 structure module is not included, as the XHTML document is defined to be the host language, and so provides the equivalent elements and semantics.�

Metainformation Module: The SMIL 2.0 Metainformation module is not included, as XHTML provides metadata functionality.�

2- Normative Definition of XHTML+SMIL

This section is normative.

2.1-Document Conformance

A conforming XHTML+SMIL document is a document that requires only the facilities described as mandatory in this specification. Such a document must meet all of the following criteria:

1. It must validate against the XML DTD found in Appendix A
2. The root element of the document must be html.
3. The name of the default namespace on the root element must be the XHTML namespace name: http://www.w3.org/1999/xhtml.
4. If a DOCTYPE declaration is present and includes a public identifier, the DOCTYPE declaration must reference the DTD found in Appendix A using its Formal Public Identifier. The system identifier may be modified appropriately.

2.2-User Agent Conformance

The user agent must conform to the "User Agent Conformance" section of the XHTML specification ([XHTML10], section 3.2), the "XHTML Family User Agent Conformance section of XHTML Modularization" ([XMOD] , section 3.5).�and the conformance requirements detailed in the SMIL modules ([SMIL20] ) supported by the integration profile.

The user agent must conform to the following additional user agent rule:

1. When the user agent claims to support facilities defined within the SMIL 2.0 specifications or required by this specification through normative reference, it must do so in ways consistent with the facilities' definition.

2.3-XHTML Namespace Integration

The default XML namespace of an XHTML+SMIL document is XHTML.� SMIL elements are included through an additional SMIL namespace declaration:

<html xmlns="http://www.w3.org/1999/xhtml" xmlns:smil="http://www.w3.org/2001/SMIL20">

The name of the unique identifier for the namespace within the document (in this example, 'smil') is left to the discretion of the document author.

2.4-XHTML+SMIL Profile

The XHTML functionality in the XHTML+SMIL document type is based upon the XHTML modules defined in XHTML Modularization [XMOD], and the Ruby Annotation module as defined in [RUBY]. In addition, the XHTML+SMIL document type supports the timeline-centric multimedia features defined by SMIL 2.0. The formal definition of the modules is not repeated here, but only the extensions introduced with timing. The notation, terms and document conventions used here are borrowed from XHTML Modularization [XMOD] .

The profile includes the XHTML modules defined in [XMOD] and the following SMIL 2.0 modules:

• Animation Functionality
  BasicAnimation Module, SplineAnimation Module
• Content Control Functionality
  BasicContentControl Module
• Media Object Functionality
  BasicMedia Module, MediaClipping Module
• Timing and Synchronization Functionality
  BasicInlineTiming Module, BasicTimeContainers Module, EventTiming Module, ExclTimeContainers Module, MultiArcTiming Module, RepeatTiming Module, RestartTiming Module, SyncBehavior Module, SyncbaseTiming Module, SyncMaster Module, TimeContainerAttributes Module, WallclockTiming Module.
• Time Manipulations Functionality
  TimeManipulations Module
• Transition Effects Functionality
  InlineTransitions Module

In the module descriptions below, reference is made to the "Common" attribute set and content sets defined in XHTML Modularization [XMOD].

2.5-Animation Module

The Animation Module provides a framework for incorporating animation onto a timeline (a timing model) and a mechanism for composing the effects of multiple animations (a composition model). The Animation Moduledefines semantics for the animate, set, animateMotion, and animateColor elements, as well as where these elements may be used.

The syntactic conventions used in this document to describe additions and modifications to element content sets are borrowed from [XMOD]. In particular, the ampersand**(&)** is used to denote that a module modifies an element or set of elements with the addition of new attributes or content model arguments. Additionally, the asterisk (*) is used to denote that new arguments may be used in an existing element's content model.

This module defines the following content sets (element groups for the purpose of defining content models):

BasicAnimation

animate |animateColor |set | animateMotion (not including spline support from the SplineAnimation Module)

AllAnimation

BaseAnimation (plus the spline support from the SplineAnimation Module)

Specifying the target element of the animation

This profile uses the targetElement attribute to identify the element to be affected by animation elements. As recommended in the BasicAnimation Module when the targetElement attribute is supported, the profile excludes the XLink [XLINK] attributes href, type, actuate, and show from the animate, set, animateMotion, and animateColor elements.

Animation is allowed on all elements included in XHTML modules defined by XHTML Modularization [XMOD]�unless exempted by this list:

• head, title, style, meta, base, link
• script
• param
• par, seq, excl
• switch
• animate, set, animateMotion , animateColor
• frameset, frame, noframes

Certain animation elements are restricted to targeting only the following elements with the targetElement attribute:

Specifying the target attribute name of the animation

The target attributes of the animation are a subset of the attributes of the allowed target elements. For the elements on which animation is allowed, the following attributes may be animated:�
align, bgcolor, border, cellhalign, cellpadding, cellspacing,cellvalign, checked,class, clear, color, cols, dir, disabled, face, frame, frameborder, height, href, marginwidth, marginheight, rows, rules, selected, noshade, size, style, title, valign, value, width.�

Positioning model and constraints for the animateMotion element

The origin attribute of the animateMotion element defines the relative origin of the values specified.

origin = ( parent | element )

Specifies the origin of the values specified in the animateMotion element.

element

The motion animation is defined relative to the target element's position.
This is the default.

parent

The motion animation is defined relative to the parent container of the target element.

The origin attribute controls the interaction of the animation function values with the layout position of the target element. The CSS attributes position, top, and left determine the layout position of the element. In effect, origin determines whether to add the element position to the result of the animation function to obtain the element position in the container coordinate space.

Origin and Absolute Positioning

The following example illustrates element relative motion:

The layout position of the target div is (100,100). The effect is to add the layout position of the target element to each value of the animation function. The target moves from position (150, 150) to (250, 250) in the container coordinate space.

The following example illustrates parent relative motion:

The layout position of the target div again is (100,100). The effect is to ignore the layout position when computing the animation function values. The target moves from position (50, 50) to (150, 150) in the container coordinate space.

Constraints for the animateColor element

The BasicAnimation Module expresses the attribute upon which the animation should act using the attributeName attribute. The only valid target attribute names for the animateColor element are the CSS2 color properties.

Argument value syntax for numeric animation

The SMIL 2.0 Animation module defines clamping values for certain numeric attributes. The calculation of these attributes shall be performed in floating point.

2.6-Content Control Module

The SMIL2.0 Content Control Module provides a framework for selecting content based on a set of test attributes. The Content Control Module defines semantics for the switch element, adds the switch element to the Flowcontent set of the XHTML Basic Text module, and adds the Test attributes set to the elements in the Flow content set of the XHTML Basic Text Module.

The Content Control Module defines the Attribute set "Test ".

2.7-Media Object Module

The SMIL2.0 Media Object Module provides a framework for declaring media. The Media Object Module defines semantics for the ref, animation, audio, img, iframe (additional to semantics defined by XHTML), video, text�and textstream elements. XHTML defines img and iframe elements, and so the integration of the Media module extends the semantics and content model of these elements.

This profile adds the ref, animation, audio, img, iframe, video, text�and textstream elements to the content model of the par, seq, and excl elements of the Timing and Synchronization Module. It also adds these elements to the Inline content set of the Basic Text Module .

Additional integration issues for the Media Object Module

This profile adds media object properties to the XHTML img and iframe elements. While implementation rules for the img element remain unchanged, the following issues must be taken into consideration when supporting a SMIL-enabled iframe:

• When the iframe contains timed content, including SMIL documents, additional XHTML+SMIL content, or timed multimedia, the timeline of the nested object should not begin until theiframe element begins.
• The timeline on an object contained inside an iframe element should restart each time theiframe element begins or repeats. If applicable, a reset event should be fired on the root element of the document hosted by theiframe.

2.8-Timing and Synchronization Module

The SMIL2.0 Timing and Synchronization Module provides a framework for describing timing structure, timing control properties, and temporal relationships between elements.

The Timing and Synchronization Module defines the elements par, seq, and excl. It adds the par, seq, and excl �elements to the Inline content set of the Basic Text, Hypertext and Tables Modules.

This profile adds the Timing and RuntimeSync attribute sets from the Timing and Synchronization Module�to the elements in the Media Object Module, and adds the Timing attribute set to the Flow content set of the Basic Text Module In addition, the Timing attribute set is added to the body element in the XHTML Structure module.

The Timing and Synchronization Module defines the Attribute sets "Timing" and "RuntimeSync ".

In addition to the data types defined by XHTML Modularization, the XHTML+SMIL profile defines the TimeActions data type and its semantics, described in the following table:

TimeContainer and timeAction

As part of the integration of timing and synchronization functionality with XHTML, this profile defines the timeContainer and timeAction attributes. This profile adds the timeContainer and timeAction attributes to the elements of the Flow content set of the Basic Text Module (as modified by all included modules). In addition, the timeContainer and timeAction attributes are added to the body element in the XHTML Structure module. The default value of the timeContainer attribute for body is "par". The timeContainer attribute is not allowed on the time container elements par, seq, and excl .

The timeAction attribute defines the behavior that is controlled by the timing model. The default depends upon the type of element. The default value is "none" when used with the time container elements. The default value of the timeActionattribute for body is "none".

The following table presents the default time actions. Those modules and elements that are not included do not have a defined time behavior, and cannot legally support timing attributes, or participate in the time model.

Certain elements have a notion of intrinsic behavior that can be controlled over time. This is generally some presentation or behavioral effect, such as the font style controls of the band strong elements, and the click sensitivity of the a and areaelements. One way to logically model the control of intrinsic behavior is to replace the element with a span when it is neither active nor frozen, and to use the original element when it is active or frozen.

Many other elements simply contain content and so default to controlling the "visibility" property for the element. In some cases, an element may have a presentational effect (e.g. the Ruby module elements), but be modeled as a content element. The decision is based upon the usefulness in common authoring scenarios of controlling the presentational behavior in isolation.

For those elements that default to controlling "visibility", setting timeAction to any other value overrides this, and will only control the specified timeAction (and not the visibility). For all other elements, the timeAction will control the default (intrinsic) behavior as well as the indicated timeAction behavior.

In addition, for those elements that default to "visibility", when they are children of a sequence time container seq or an element with "timeContainer=seq", the default timeAction is "display". This more closely matches the expected behavior of the SMIL Language profile.

Element default timeActions

All modules not listed in the table, and all Structure module elements except body do not support timing.

Events supported by XHTML+SMIL

The XHTML+SMIL Language profile specifies events that can be used in conjunction with the SMIL elements defined by the profile. Additionally, DOM 2 dynamic events [DOMLevel2Events] can also be used.

Additional integration conformance issues with Timing

The Timing and Synchronization Module defines the following additional conformance definition requirements for the language integration profile:

• The XHTML+SMIL document is presented when it is displayed on the screen.
• The document begins when it has been completely received by the client, loaded by the user agent, and presented.
• The document ends when the user agent ceases to present it, through switching to another document or exiting.

2.9-Time Manipulations Module

The SMIL2.0 Time Manipulations Module provides attributes for the manipulation of SMIL element timelines.

The Time Manipulations Module defines the accelerate, decelerate, autoReverse, and speed attributes. These attributes are added to the elements that support timing in the XHTML+SMIL profile, including the elements in the Media Object Module, the SMIL animation, time container and transition elements, the XHTML elements img, iframe, body and the XHTML Flowelement set.

2.10-Transition Effects Module

The Transition Effects Module defines a taxonomy of transition effects as well as semantics and syntax for integrating these effects into XHTML documents. The XHTML+SMIL profile includes the functionality of the InlineTransitionsmodule, which defines the transitionFilterelement.

In an XHTML document, transitionFilter elements have the following attributes and content model:

A transitionFilter element may contain one or more XHTML param elements describing extended transition functionality, as described in the Transition Effects Module (specific section).

The transitionFilter element is added to the content model of the elements in the Media Object Module, and XHTML elements that support rendered content.

The specific XHTML elements that will support transitionFilter needs further attention.

3-Extending the XHTML+SMIL Language Profile

This section is normative.

In the future, XHTML+SMIL Language may be extended by other W3C recommendations, or by private extensions. For these extensions, the following rules must be obeyed:

• All elements introduced in extensions must have a skip-content attribute if it should be possible that their content is processed by XHTML+SMIL user agents.
• Private extensions must be introduced by defining a new XML namespace.

Conformant XHTML+SMIL user agents are prepared to handle documents containing extensions that obey these two rules.

Appendix A: Document Type Definition

This section is normative .

TBD.

Appendix B: References

[CSS2]

"Cascading Style Sheets, level 2", Bert Bos, H�kon Wium Lie, Chris Lilley, Ian Jacobs. W3C Recommendation 12 May 1998,
Available at http://www.w3.org/TR/REC-CSS2

[HTML4]

"HTML 4.01 Specification" D. Raggett, A. Le Hors, I. Jacobs. W3C Recommendation 24 December 1999,
Available at http://www.w3.org/TR/html401/

[DOMLevel2Events]

"Document Object Model Level 2 Events Specification", Tom Pixley. W3C Recommendation 13 November, 2000
Available at http://www.w3.org/TR/DOM-Level-2-Events/

[RUBY]

"Ruby Annotation". W3C Recommendation 31 May 2001.
Available at http://www.w3.org/TR/2001/REC-ruby-20010531

[SMIL20]

"Synchronized Multimedia Integration Language (SMIL 2.0) Specification". W3C Recommendation 07 August 2001,
Available at http://www.w3.org/TR/smil20/

[SMIL20-MOD]

"The SMIL 2.0 Modules", W3C Recommendation 07 August 2001,
Available at http://www.w3.org/TR/smil20/smil-modules.html

[SMIL-MOD-NOTE]

"Synchronized Multimedia Modules based upon SMIL 1.0", Patrick Schmitz, Ted Wugofski and Warner ten Kate. W3C Note 23 February 1999,
Available at http://www.w3.org/TR/NOTE-SYMM-modules. Superceded by [SMIL20-MOD] .

[XHTML10]

"The Extensible HyperText Markup Language: A Reformulation of HTML 4.0 in XML 1.0". W3C Recommendation 26 January 2000,
Available at http://www.w3.org/TR/xhtml1/

[XLINK]

"XML Linking Language (XLink)", S. DeRose, E. Maler, D. Orchard and B. Trafford. W3C Recommendation 27 June 2001,
Available at http://www.w3.org/TR/xlink

[XMOD]

"Modularization of XHTML", Shane McCarron, Murray Altheim, et al. W3C Recommendation 10 April 2001,
Available at http://www.w3.org/TR/xhtml-modularization

[XSCHEMA]

"XML Schema, XML Schema Part 1: Structures". W3C Recommendation 2 May 2001,
Available at http://www.w3.org/TR/xmlschema-1/