ATCDDD - Structure and principles (original) (raw)
Structure
In the ATC classification system, the active substances are classified in a hierarchy with five different levels. The system has fourteen main anatomical/pharmacological groups or 1st levels. Each ATC main group is divided into 2nd levels which could be either pharmacological or therapeutic groups. The 3rd and 4th levels are chemical, pharmacological or therapeutic subgroups and the 5th level is the chemical substance. The 2nd, 3rd and 4th levels are often used to identify pharmacological subgroups when that is considered more appropriate than therapeutic or chemical subgroups.
The complete classification of metformin illustrates the structure of the code:
| A | Alimentary tract and metabolism(1st level, anatomical main group) |
|---|---|
| A10 | Drugs used in diabetes(2nd level, therapeutic subgroup) |
| A10B | Blood glucose lowering drugs, excl. insulins(3rd level, pharmacological subgroup) |
| A10BA | Biguanides(4th level, chemical subgroup) |
| A10BA02 | metformin(5th level, chemical substance) |
Thus, in the ATC system all plain metformin preparations are given the code A10BA02.
Nomenclature (to the top)
- International nonproprietary names (INN) are preferred. If INN names are not assigned, USAN (United States Adopted Name) or BAN (British Approved Name) are usually chosen.
- A Biological Qualifier (BQ) is not part of the INN and the introduction of a new BQ will not have any implication on the ATC code for the specific INN. Further information about the Biological Qualifier can be found here: http://www.who.int/medicines/services/inn/WHO_INN_BQ_proposal_2015.pdf?ua=1
Inclusion and exclusion criteria (to the top)
The WHO Collaborating Centre in Oslo establishes new entries in the ATC classification on requests from the users of the system. These include manufacturers, regulatory agencies and researchers. The coverage of the system is not comprehensive. A major reason why a substance is not included is that no request has been received.
Substances which fulfil one of the following criteria will normally be included in the ATC system:
- new chemical entities or biologicals proposed for licensing. A new chemical entity is normally not included in the ATC system before an application for marketing authorisation is ready for submission in at least one country.
- existing well defined chemical entities with an approved marketing authorization in one or more countries. An INN should preferably be established for the substance. Alternatively other official names, e.g. USAN or BAN names should be available.
- herbal medicinal products assessed and approved by regulatory authorities based on dossiers including efficacy, safety, and quality data (e.g. the well-established use procedure in EU).
Other medicinal products are considered on a case by case basis. Complementary, homeopathic and herbal traditional medicinal products are in general not included in the ATC system.
Therapeutic use or pharmacological class (to the top) Medicinal products are classified according to the main therapeutic use of the main active ingredient. The ATC system is, however, not strictly a therapeutic classification system. In many ATC main groups, pharmacological groups have been assigned on the 2nd, 3rd and 4th levels allowing drugs with several therapeutic uses to be included without specifying the main indication. For example, calcium channel blockers are classified in the pharmacological group C08 Calcium channel blockers, which avoids specifying whether the main indication is coronary heart disease or hypertension. Subdivision on the mechanism of action will, however, often be rather broad (e.g. antidepressants), since a too detailed classification according to mode of action often will result in having one substance per subgroup which as far as possible is avoided. Some ATC groups are subdivided in both chemical and pharmacological groups (e.g. ATC group J05A - Direct acting antivirals). Preference will be given to establishing a new pharmacological 4th level rather than a chemical subgroup.
Many medicines are used and approved for two or more indications, while normally only one ATC code will be assigned. Besides, ATC codes are often assigned according to the mechanism of action rather than therapy. An ATC group may therefore include medicines with many different indications, and drugs with similar therapeutic use may be classified in different groups.
Only one ATC code for each route of administration (to the top) Medicinal substances are classified according to the main therapeutic use or pharmacological class on the basic principle of only one ATC code for each route of administration (e.g. oral formulations with similar ingredients and strength will have the same ATC code). This is an important principle for ATC classification as it allows aggregation of data in drug utilization monitoring and research without counting a pharmaceutical product more than once. This principle is strictly handled by the WHO Centre so that users in different countries shall be able to classify a pharmaceutical product (defined by active ingredient/s, route of administration and strength) in the same way.
A pharmaceutical product may be approved for two or more equally important indications, and the main therapeutic use may differ from one country to another. This will often give several classification alternatives. Such drugs are only given one code, the main indication being decided on the basis of the available information. Problems are discussed in the WHO International Working Group for Drug Statistics Methodology where the final classification is decided. Cross-references will be given in the guidelines to indicate the various uses of such drugs.
More than one ATC code for a medicinal substance (to the top) A medicinal substance can be given more than one ATC code if it is available in two or more strengths or routes of administration with clearly different therapeutic uses.
Example of different strengths:
- Finasteride is available in two different strengths. A low strength tablet for the treatment of male pattern baldness is classified under D11AX - Other dermatologicals. A high strength tablet used in the treatment of benign prostatic hypertrophy (BPH) is classified under G04C - Drugs used in BPH.
Example of different administration forms:
- Prednisolone in single ingredient products is given several ATC codes due to different therapeutic use and different formulations.
A07EA01 Intestinal antiinflammatory agents (enemas and foams)
C05AA04 Antihemorrhoidals for topical use (suppositories)
D07AA03 Dermatological preparations (creams, ointments and lotions)
H02AB06 Corticosteroids for systemic use (tablets, injections)
R01AD02 Nasal decongestants (nasal sprays/drops)
S01BA04 Ophthalmologicals (eye drops)
S02BA03 Otologicals (ear drops)
New ATC groups and “other” groups (X groups) (to the top) A new medicinal substance not clearly belonging to any existing ATC 4th level will as a main rule be placed in an X group ("other" group) in the relevant 3rd level. To avoid a situation of several 4th levels with only one single substance in each, new specific 4th levels are as a general rule only established when at least two substances with marketing authorisations fit in the group. In addition, a new 4th level should be regarded a benefit for drug utilization research. New and innovative pharmaceutical products will therefore often be classified in an X group and such groups could be established for only one single substance.
Other general principles (to the top) Immediate and slow release tablets will normally have the same ATC code.
Different stereoisomeric forms will normally have separate ATC codes. Exceptions will be described in the guidelines for the respective ATC groups
Prodrugs are usually assigned separate ATC codes if the dosages used are different and/or the nonproprietary name (INN) of the prodrug and the active drugs are different.
Example:
J01CA08 pivmecillinam
J01CA11 mecillinam
Obsolete drugs or drugs withdrawn from the market are kept in the ATC system, since exclusion of substances from the ATC system may create difficulties for the users of the system when considering historical data.
Classification of combination products (to the top) Pharmaceutical products containing two or more active ingredients are regarded as combinations (incl. combination packages) and given different ATC codes from plain products containing one active ingredient. Stereoisomeric mixtures are regarded as plain products. Medicinal products which in addition to one active ingredient contain auxiliary substances intended to increase the stability of the product (e.g. vaccines containing small amounts of antibacterials), increase the duration (e.g. depot formulations) and/or increase the absorption (e.g. different solvents in various dermatologicals) are considered as plain products.
The classification of combination products is a challenge in any classification system. As for plain products, combinations are in general classified according to their main therapeutic use or pharmacological class. A medicinal product containing an analgesic and a tranquillizer, and used primarily to ease pain, should be classified as an analgesic. Likewise, combinations of analgesics and antispasmodics will be classified in A03 Drugs for functional gastrointestinal disorders if the antispasmodic effect of the product is considered most important. Similar examples are described in detail in the guidelines for the relevant drug groups.
In some ATC groups a ranking is introduced to help in the classification of combination products (e.g. combinations of different antihypertensives and combinations of different analgesics). This ranking shows which drug takes precedence over others when the classification is decided. This is detailed in the guidelines for the relevant drug groups.
A commonly used principle for combinations with active ingredients not belonging to the same ATC 4th level, is that the main ingredient in the combination is identified and the combination is given a separate 5th level code (50-series) in the same 4th level as the main ingredient is classified.
Example:
N02BE01 paracetamol
N02BE51 paracetamol, combinations excl. psycholeptics
In this example different combination products share the same main active ingredient (paracetamol in the example above) and are given the same ATC code. Combinations of e.g. paracetamol + acetylsalicylic acid and paracetamol + caffeine are thus classified in the same code N02BE51 paracetamol, combinations excl psycholeptics.
The names of all active ingredients of a combination are given in some ATC 5th levels. This principle has been used more frequently in recent years in order to give a better identification of the various combinations.
Example:
M01AE02 naproxen
M01AE52 naproxen and esomeprazole
M01AE56 naproxen and misoprostol
Some combination products containing psycholeptic drugs, which are not classified under N05 - Psycholeptics or N06 - Psychoanaleptics, are classified at separate 5th levels using the 70-series, e.g. N02BE71 paracetamol, combinations with psycholeptics.
Most of the ATC 70-serie codes were established many years ago and the products included in these codes may be obsolete today.
Combinations containing two or more active ingredients belonging to the same 4th level are in some cases classified using the 5th level code 30 (or 20). Further explanation is given in the relevant chapters of the guidelines. Only a few new codes have been established according to this principle in recent years.
Example:
B01AC06 acetylsalicylic acid
B01AC07 dipyridamole
B01AC30 combinations (e.g. acetylsalicylic acid and dipyridamole)
An important principle used more frequently in recent years as more rational combinations have been marketed, is to assign separate ATC 3rd or 4th levels for combinations.
Examples:
C10B Lipid modifying agents, combinations
J05AR Antivirals for treatment of HIV infections, combinations
N02AJ Opioids in combination with non-opioid analgesics
R03AL Adrenergics in combination with anticholinergics incl triple combinations with corticosteroids
In these ATC groups for combinations, the ATC 5th level code often specify the active ingredients (e.g. C10BX04 simvastatin, acetylsalicylic acid and ramipril). How specific and “visible” a combination appears in the ATC classification, will to some extent depend on the need for a detailed classification from a drug utilization point of view.
There are some exceptions to these main principles and these are explained in the guidelines.