WCA Regulations | World Cube Association (original) (raw)

Notes

WCA Regulations and Guidelines

The WCA Regulations contain the full set of Regulations that apply to all official competitions sanctioned by the World Cube Association.
The WCA Regulations are also supplemented by the WCA Guidelines. The Regulations should be considered a complete document, but the Guidelines contain additional clarifications and explanations.

Wording

Uses of the words "must", "must not", "should", "should not" and "may" match RFC 2119.

Information on the Internet

Website of World Cube Association: www.worldcubeassociation.org
Original source of the WCA Regulations: www.worldcubeassociation.org/regulations
WCA Regulations in PDF format

Source

Development of the WCA Regulations and Guidelines is public on GitHub and the discussion is public on the WCA Forum.

Contact

For questions and feedback, please contact the WCA Regulations Committee (WRC).

Contents

Note: Because Article and Regulation numbers are not reassigned when Regulations are deleted, there may be gaps in numbering.

• Article 1: Officials
• Article 2: Competitors
• Article 3: Puzzles
• Article 4: Scrambling
• Article 5: Puzzle Defects
• Article 7: Environment
• Article 9: Events
• Article 10: Solved State
• Article 11: Incidents
• Article 12: Notation
• Article A: Speed Solving
• Article B: Blindfolded Solving
• Article C: One-Handed Solving
• Article E: Fewest Moves Solving
• Article F: Clock Solving
• Article H: Multi-Blind Solving

Article 1: Officials

• 1a) A competition must include a WCA Delegate and an organization team (consisting of one or more individuals) with the following officials: judges, scramblers and score takers.
• 1b) The organization team of a competition is responsible for logistics before, during, and after the competition.
• 1c) The WCA Delegate is responsible for ensuring that the competition adheres to the WCA Regulations and any applicable WCA policies or requirements. The WCA Delegate may appoint other members of the organization team to carry out specific responsibilities on their behalf, but is ultimately accountable for how these responsibilities are carried out.
  • 1c1) The WCA Delegate must ensure that the competition follows the WCA Scramble Accountability Policy.
• 1e) Each event must have one or more judges.
  • 1e1) A judge is responsible for executing the procedures of the event.
    * 1e1a) A judge may judge multiple competitors simultaneously at the discretion of the WCA Delegate, as long as the judge is able to ensure that all WCA Regulations are followed at all times.
  • 1e2) Every competitor must be available for judging. If required to judge, a competitor may be excused only for a legitimate reason (e.g. being unfamiliar with a puzzle), at the discretion of the WCA Delegate. Penalty: disqualification from an event, multiple events, or all events at that competition (see Regulation 2k).
• 1f) Each event must have one or more scramblers. Exception: 3x3x3 Fewest Moves.
  • 1f1) A scrambler applies scramble sequences to prepare puzzles for attempts (see Regulation A2).
  • 1f2) Every competitor must be available for scrambling. If required to scramble, a competitor may be excused only for a legitimate reason (e.g. being unfamiliar with scrambling notation), at the discretion of the WCA Delegate. Penalty: disqualification from an event, multiple events, or all events at that competition (see Regulation 2k).
• 1g) Each event must have one or more score takers.
  • 1g1) A score taker is responsible for compiling results.
  • 1g2) Changes to the result on a score sheet are only permitted at the discretion of the WCA Delegate.
• 1h) Competitors in the same round of an event may compete as a single group or be divided into multiple groups.
  • 1h1) Scramblers and judges for a round should not scramble for/judge competitors in their own group before they have finished all of their attempts for the round. They may scramble for/judge competitors in their own group at the discretion of the WCA Delegate, but the organization team must ensure that scramblers and judges cannot see any scramble sequences for their attempts that they have not attempted yet (see Regulation 4b2).
• 1j) All officials may compete in the competition.
• 1k) Officials may serve multiple roles (e.g. organization team, WCA Delegate, judge, score taker, scrambler).

Article 2: Competitors

• 2a) Any person may compete in a WCA competition if they:
  • 2a1) Comply with WCA Regulations.
  • 2a2) Meet the competition requirements, which must be clearly announced before the competition.
  • 2a3) Are not suspended from participation by the WCA.
  • 2a4) Comply with all reasonable safety measures deemed necessary by the WCA Delegate, which must be clearly announced before the competition.
• 2b) Competitors below the age of 18 must obtain consent from their parent(s)/guardian(s) to register and compete.
• 2c) Competitors register by providing all information required by the organization team (including: name, region of representation, date of birth, gender, contact information, selected events).
  • 2c1) A competitor is not eligible to compete without a completed registration, as determined by the organization team and the WCA Delegate.
  • 2c2) Returning competitors must provide personal information consistent with their WCA profile. If a competitor wishes to change or update their personal information between competitions (e.g. a change of region of representation, name, or gender), they must contact the WCA Results Team either directly or through a WCA Delegate.
• 2d) A competitor's name, region of representation, gender, and competition results are considered public information. All other personal information is considered confidential, and must not be disclosed to outside organizations/persons without the consent of the competitor.
• 2e) Competitors must represent a region of which they hold citizenship. The WCA Delegate should verify citizenship by means of documents (e.g. a passport) at their first competition. If a competitor is found ineligible to represent the region under which they have registered, the competitor may be disqualified retroactively and/or suspended, at the discretion of the WCA Board.
  • 2e1) The eligible regions of representation are defined by the WCA List of Recognized Regions.
  • 2e2) Competitors may change their region of representation only before or at their first competition of a calendar year.
    * 2e2a) Exception: If the competitor loses citizenship of the region which they were previously representing, they must change their region of representation before or at their next competition (see Regulation 2c2).
    * 2e2b) Exception: If the competitor has acquired a new citizenship within the calendar year, they may change their region of representation to their new citizenship at any point between competitions.
  • 2e3) Competitors who have no citizenship may compete as "Stateless".
• 2f) Competitors must obey venue rules and conduct themselves in a considerate manner.
• 2g) Competitors must remain quiet when inside the designated competition area. Talking is permitted, but must be kept at a reasonable level, and away from competitors who are actively competing.
  • 2g3) Competitors in a group in progress must not communicate with other competitors in the group about the scrambled states of the group, unless all such competitors are not eligible for any further attempts in the group. Penalty: disqualification of the competitor(s) from the event, at the discretion of the WCA Delegate. Exception: For 3x3x3 Fewest Moves, competitors that have finished their attempt may share the scramble sequence with anyone who is not actively competing in the relevant attempt.
• 2h) Competitors must be appropriately dressed while in the competition venue. At the discretion of the WCA Delegate, competitors may be disqualified from the competition for inappropriate clothing.
• 2i) While inspecting or solving, competitors must not use electronics or audio equipment (e.g. cell phones, MP3 players, dictaphones, additional lighting) apart from the Stackmat timer or stopwatch. Penalty: disqualification of the attempt (DNF).
  • 2i1) Competitors may use non-electronic aids that do not give an unfair advantage, at the discretion of the WCA Delegate. This includes:
    * 2i1a) Medical/physical aids worn by the competitor (e.g. glasses, wrist brace). As an exception to Regulation 2i, medical aids may be electronic if the competitor does not have comfortable non-electronic alternatives (e.g. if the competitor has a personal hearing aid or pacemaker).
    * 2i1b) Earplugs and earmuffs (but not electronic headphones and earbuds).
    * 2i1c) Hand warmers.
    * 2i1d) Food and drink.
  • 2i2) Competitors may use cameras at the solving station at the discretion of the WCA Delegate, but the following restrictions apply from the start of the attempt until the competitor stops the solve. Penalty for breaking a restriction: disqualification of the attempt (DNF).
    * 2i2a) Each camera monitor must be blank or out of sight of the competitor (see Regulation A5b).
  • 2i4) Competitors should turn off all cell phone notifications while competing to avoid disturbing the competition.
• 2j) The WCA Delegate may disqualify a competitor from specific attempts and/or events.
  • 2j1) If a competitor is disqualified from an event for any reason, they are not eligible for any more attempts in the event.
    * 2j1a) If the competitor has already started at least one attempt in a round before being disqualified from it, the results of all remaining attempts in the event are recorded as DNF. If the competitor has started no attempts (i.e. has no results or only has DNS results), no results are recorded.
  • 2j2) Results from attempts that are completed when the disqualification is applied, must not be disqualified. Exception: cheating or defrauding (see Regulation 2k2a).
  • 2j3) Specific completed attempts may be disqualified under the circumstances described in Regulation 2k, only if the relevant incident occurred during the attempt.
• 2k) At the discretion of the WCA Delegate, a competitor may be disqualified from specific attempts and/or events (a single event, multiple events, or all events) if the competitor:
  • 2k1) Fails to check in or register in time for the competition.
  • 2k2) Is suspected of cheating or defrauding the officials during the competition.
    * 2k2a) The WCA Delegate may disqualify any suspected results.
  • 2k3) Behaves in a way that is unlawful/violent/indecent/unsafe, or intentionally damages venue facilities or personal property within the venue.
  • 2k4) Distracts or interferes with others during the competition.
  • 2k5) Fails to abide by WCA Regulations during the competition.
  • 2k6) Does not fulfill the event's requirements (e.g. not knowing how to solve the puzzle). A competitor should not compete with the expectation of a DNF result or an intentionally poor result.
• 2l) A competitor may be disqualified immediately, or after a warning, depending on the nature and severity of the infraction.
  • 2l1) A disqualified competitor is not eligible for the refund of any expenses due to participating in the competition.
• 2n) Competitors may verbally dispute a ruling to the WCA Delegate.
  • 2n1) Disputes are only permitted during the competition (see Regulation 9u), within 30 minutes after the disputed incident happened, or before the start of any following rounds of the relevant event.
  • 2n2) The WCA Delegate must resolve the dispute before the start of the next round of the event.
  • 2n3) The competitor must accept all final rulings of the WCA Delegate. Penalty: disqualification from the competition.
• 2s) Competitors with circumstances (e.g. disability) that may prevent them from abiding by one or more WCA Regulations may request special accommodations from the WCA Delegate. Competitors requesting such accommodations should contact the organization team and WCA Delegate at least two weeks before the competition.
  • 2s1) Competitors whose circumstances result in it being impossible to follow regular competition procedures may have special accommodations. These cases should be brought up to the WCA Regulations Committee before being applied.
• 2t) Each competitor must be familiar with and understand the WCA Regulations before the competition.
• 2u) Competitors must be present and ready to compete when they are called to compete for an attempt. Penalty: disqualification from the event.
  • 2u1) Exception: A competitor who is not present in time for an individually scheduled attempt (e.g. a 3x3x3 Fewest Moves attempt, a 3x3x3 Multi-Blind attempt) may be considered to have declined that attempt (DNS), at the discretion of the WCA Delegate.
  • 2u2) Exception: For rounds with a cumulative time limit, a competitor who arrives late may compete with a reduced cumulative time limit, at the discretion of the WCA Delegate.

Article 3: Puzzles

• 3a) Competitors must provide their own puzzles for the competition.
  • 3a1) Competitors must be ready to submit their puzzles when they are called (see Regulation 2u).
  • 3a2) Puzzles must be fully operational, such that normal scrambling is possible.
  • 3a3) Polyhedral puzzles must use a color scheme with one unique color per face in the solved state. Each puzzle variation must have moves, states, and solutions functionally identical to the original puzzle.
  • 3a4) Puzzles must not have electronic components (e.g. Bluetooth or Wi-Fi capabilities, motors, sensors, lights). See Regulation 2i.
• 3d) Puzzles must have colored parts, which define the color scheme of the puzzle and must be one and only one of the following: colored stickers, colored tiles, colored plastic, or painted/printed colors. All colored parts of a puzzle must be made of a similar material.
  • 3d1) For competitors with a medically documented visual disability, the following exceptions apply:
    * 3d1a) Blind competitors may use textured puzzles with different textures on different faces. Each face should have a distinct color, to aid in scrambling and judging.
    * 3d1b) Color blind competitors who cannot distinguish between the necessary number of colors may use colored parts with patterns, if it has been explicitly approved according to Regulation 2s. Patterns may come from stickers or be drawn.
  • 3d2) The colors of the colored parts must be solid, with one uniform color per face. Each color must be clearly distinct from the other colors.
• 3h) Modifications that enhance the basic concept of a puzzle are not permitted. Modified versions of puzzles are permitted only if the modification does not make any additional information available to the competitor (e.g. orientation or identity of pieces), compared to an unmodified version of the same puzzle.
  • 3h1) "Pillowed" puzzles are permitted.
  • 3h2) Puzzles whose colored plastic is visible inside the puzzle (e.g. "stickerless" puzzles) are permitted. This does not include the following puzzles:
    * 3h2a) Puzzles with transparent parts that can reveal more information about the state of the puzzle. Exception: An overlay sticker or a logo (see Regulation 3l).
  • 3h3) Any modifications to a puzzle that result in poor performance by a competitor are not grounds for additional attempts.
  • 3h4) For Clock, the following modifications are permitted:
    * 3h4a) Custom "inserts" (the same shape and size as the traditional paper inserts) are permitted, at the discretion of the WCA Delegate. The inserts must have a clear indication of 12 o'clock that matches the original inserts.
    * 3h4b) Puzzle design customizations that do not give an unfair advantage may be permitted, at the discretion of the WCA Delegate (e.g. checkerboard pattern clocks, faces with a custom design, tape on the side of the Clock).
    * 3h4c) Customizations which distinguish pins from other pins of the same side are permitted, at the discretion of the WCA Delegate.
    * 3h4d) Logos anywhere on the puzzle, as long as the inner clock faces remain uncovered.
  • 3h5) For Clock, loose pins (i.e. pins that can toggle or recede using gravity instead of being directly pressed) are not considered reasonable wear, and puzzles with such pins must not be permitted.
• 3j) Puzzles must be clean, and must not have any markings, elevated pieces, damage, or other differences that significantly distinguish any piece from a similar piece. Exception: a logo (see Regulation 3l).
  • 3j1) Puzzles are permitted to have reasonable wear, at the discretion of the WCA Delegate.
    * 3j1a) Wear should be considered reasonable if it is a result of normal use of the puzzle and if it does not give significant additional information about the state of the puzzle (e.g. about the location of specific pieces).
  • 3j2) Definition: Two pieces are similar to each other if they are identical in shape and size, or mirrored in shape and identical in size.
  • 3j3) Corrugated/textured parts which permit the orientation of pieces to be distinguished by feel are not permitted for blindfolded events.
• 3k) Puzzles should be approved by the WCA Delegate before use in the competition.
  • 3k1) If a non-permitted puzzle is found during a round, the competitor must not continue to use the puzzle, and must submit a replacement.
  • 3k2) Penalty for attempts done with puzzles which are not permitted: disqualification of the attempt (DNF). The following exceptions apply:
    * 3k2a) If a non-permitted puzzle is found before a round is complete, affected results in the round may be replaced with extra attempts, at the discretion of the WCA Delegate.
    * 3k2b) 3x3x3 Multi-Blind: if any puzzles are found to be non-permitted, such puzzles may be individually counted as unsolved (without disqualifying the entire attempt), at the discretion of the WCA Delegate.
• 3l) A puzzle may have one or more logos on a colored part. If it does, it must have at most one colored part with a logo or multiple logos. Exception: For blindfolded events, a puzzle must not have any logos.
  • 3l1) The logo must be placed on a center piece. Exceptions for puzzles that do not have center pieces:
    * 3l1a) For Pyraminx and 2x2x2, the logo may be on any piece.
    * 3l1b) For Square-1, the logo must be on a piece in the equatorial slice.
  • 3l2) The logo may be embossed, engraved, or consist of an overlay sticker.
• 3m) All brands of puzzles and puzzle parts are permitted, as long as the puzzles comply with all WCA Regulations.

Article 4: Scrambling

• 4a) A scrambler applies scramble sequences to the puzzles.
• 4b) Puzzles must be scrambled using computer-generated random scramble sequences.
  • 4b1) Generated scramble sequences must not be inspected before the competition, and must not be filtered or selected in any way by the WCA Delegate.
  • 4b2) Scramble sequences for a group must be available only to the WCA Delegate before the start of that group, and only available to the WCA Delegate and the scramblers for the group until it is finished. Exception: For 3x3x3 Fewest Moves, competitors receive scramble sequences during the round (see Article E).
    * 4b2a) The designated WCA Delegate for the competition must only give access to scramble sequences for future groups to other members of the organization team if they will be temporarily unavailable (e.g. competing themselves), and should give others access to the minimum possible amount of scrambles in this case.
  • 4b3) Specification for a scramble program: An official scramble sequence must produce a random state from all states that require at least 2 moves to solve (equal probability for each state). The following additions/exceptions apply:
    * 4b3a) For blindfolded events, the scramble sequence must orient the puzzle randomly (equal probability for each orientation).
    * 4b3b) 2x2x2 Cube: The (random) state must require at least 4 moves to solve.
    * 4b3c) Skewb: The (random) state must require at least 7 moves to solve.
    * 4b3d) Square-1: The (random) state must require at least 11 moves to solve.
    * 4b3e) 5x5x5 Cube, 6x6x6 Cube, 7x7x7 Cube, and Megaminx: sufficiently many random moves (instead of random state), at least 2 moves to solve.
    * 4b3f) Pyraminx: The (random) state must require at least 6 moves to solve.
  • 4b4) Each scramble sequence should be applied during a maximum time frame of 2 hours. This time frame starts when the scramble sequence is applied for the first time.
• 4d) Scrambling orientation:
  • 4d1) NxNxN Cubes and Megaminx are scrambled starting with the white face (if not possible, then the lightest face) on the top and the darkest adjacent green face (if not possible, then the darkest adjacent face) on the front.
  • 4d2) Pyraminx is scrambled starting with the yellow face (if not possible, then the lightest face) on the bottom and the green face (if not possible, then the darkest adjacent face) on the front.
  • 4d3) Square-1 is scrambled starting with the darker color on front (out of the 2 possible scrambling orientations).
  • 4d4) Clock is scrambled starting with either side in front and 12 o'clock pointing up.
  • 4d5) Skewb is scrambled starting with the white face (if not possible, then the lightest face) on top and the green face (if not possible, then the darkest adjacent face) on the front-left.
• 4f) Competition scramble sequences must be generated using a current official version of an official WCA scramble program (available via the WCA website).
• 4g) After scrambling a puzzle, the scrambler must verify that the puzzle is scrambled correctly. If the puzzle state is wrong, the scrambler must correct it (e.g. by solving the puzzle and applying the scramble sequence again).
  • 4g1) The following exceptions apply:
    * 4g1a) For the 6x6x6 Cube, 7x7x7 Cube, and Megaminx, it is not necessary to correct the puzzle state, at the discretion of the WCA Delegate.
    * 4g1b) For the 5x5x5 Cube, the scrambler should correct the puzzle state. If correcting the puzzle state would cause a severe detriment to the schedule, it is not necessary to correct it, at the discretion of the WCA Delegate.
  • 4g2) For Multi-Blind Solving, after scrambling all the cubes, the scrambler must verify there are no duplicate scrambles.

Article 5: Puzzle Defects

• 5a) Examples of puzzle defects include: popped parts, pieces twisted in place, and detached screws/caps/stickers.
• 5b) If a puzzle defect occurs during an attempt, the competitor may choose to either repair the defect and continue the attempt, or to stop the attempt.
  • 5b1) If a competitor chooses to repair the puzzle, they must repair only the defective parts. Tools and/or parts of other puzzles must not be used to repair the original puzzle. Penalty: disqualification of the attempt (DNF).
  • 5b2) Any repair to a puzzle must not give the competitor an advantage in solving the puzzle. Penalty: disqualification of the attempt (DNF).
  • 5b3) Permitted repairs:
    * 5b3a) If any parts have fallen out or moved out of place, the competitor may place them back.
    * 5b3b) If the competitor repairs the puzzle but finds that the puzzle is unsolvable later during the solve, they may disassemble and reassemble a maximum of 4 pieces to make the puzzle solvable.
    * 5b3c) If the puzzle is unsolvable, and can be made solvable by rotating a single corner piece, the competitor may correct the corner piece by twisting it in place without disassembling the puzzle.
  • 5b4) During a blindfolded phase (see Regulation B4), all repairs must be performed blindfolded. Penalty: disqualification of the attempt (DNF).
  • 5b5) If some parts of the puzzle are physically detached or not fully placed at the end of the solve, the following regulations apply:
    * 5b5a) If one or more parts without colored faces are affected, the puzzle is considered solved.
    * 5b5b) If one part with one colored face is affected, the puzzle is considered solved.
    * 5b5c) If more than one part with one colored face is affected, the puzzle is considered unsolved (DNF).
    * 5b5d) If one or more parts with more than one colored face are affected, the puzzle is considered unsolved (DNF).
    * 5b5e) Regulations 5b5c and 5b5d supersede 5b5a and 5b5b.
    * 5b5f) If a part is partially detached or not fully placed, its final position is the closest position in which the affected piece would normally fit within the puzzle mechanism, considering the current state of the puzzle. If the final position renders the piece solved, the piece is not considered to be affected by the puzzle defect.
  • 5b6) Definition: A part is one or more fully connected components from a group of puzzle components that remain connected and do not move relative to each other during ordinary operation of the puzzle (e.g. a 3x3x3 center cap, a Pyraminx tip, a 3x3x3 corner piece missing one face, one face of a 3x3x3 corner piece).

Article 7: Environment

• 7b) Spectators must remain at least 1.5 meters away from the solving stations when they are in use.
• 7c) Lighting of the competition area must be given special attention. Lighting should be neutral, such that competitors can easily differentiate among the colors on the puzzles.
• 7e) The competition area must be smoke-free.
• 7f) Solving station:
  • 7f1) Definitions:
    * 7f1a) Stackmat: The Speed Stacks Stackmat timer and a full-size compatible mat. Generation 3 Pro Timer, Generation 4 Pro Timer, and/or Generation 5 Pro Timer must be used for time measurement.
    * 7f1b) Mat: The mat of the Stackmat.
    * 7f1c) Timer: The timer of the Stackmat, or a stopwatch (for longer attempts).
    * 7f1d) Surface: The flat surface on which the Stackmat has been placed. The mat is considered a part of the surface. The timer is not considered a part of the surface.
  • 7f2) The Stackmat timer must be attached to the mat and placed on the surface, with the timer on the side of the mat nearest to the competitor.
  • 7f3) The organization team should modify Stackmat timers to be more robust against common incidents, by making the buttons more difficult to press by accident (e.g. by attaching O-rings around the buttons) and securing the battery more firmly (e.g. by padding the battery compartment).
  • 7f4) Generation 5 Pro Timer must be used in 2-pad mode.
• 7h) The competition area should have one or more Competitor Waiting Areas.
  • 7h1) The organization team may require that a competitor who has been called to compete must remain within their assigned Competitor Waiting Area until the competitor has finished all attempts for the round.
  • 7h2) Definition: A Competitor Waiting Area is an area in which competitors in a group wait at to be called to a solving station.

Article 9: Events

• 9a) The WCA governs competitions for mechanical puzzles that are operated by twisting groups of pieces, commonly known as "twisty puzzles".
• 9b) The official events of the WCA are:
  • 9b1) 3x3x3 Cube, 2x2x2 Cube, 4x4x4 Cube, 5x5x5 Cube, 3x3x3 One-Handed, Clock, Megaminx, Pyraminx, Skewb, and Square-1.
    * 9b1a) Full round format for these events: "Average of 5".
    * 9b1b) Cutoff format for these events: "Best of 2" cutoff phase for "Average of 5".
  • 9b2) 6x6x6 Cube and 7x7x7 Cube.
    * 9b2a) Full round format for these events: "Mean of 3".
    * 9b2b) Cutoff format for these events: "Best of 1" cutoff phase for "Mean of 3".
  • 9b3) 3x3x3 Blindfolded, 4x4x4 Blindfolded, 5x5x5 Blindfolded.
    * 9b3a) Full round format for these events: "Best of 3".
    * 9b3b) For these events, the WCA also recognizes "Mean of 3" rankings and records based on the times from "Best of 3" rounds.
  • 9b4) 3x3x3 Fewest Moves.
    * 9b4a) Full round formats for this event: "Best of X" (where X is 1 or 2) or "Mean of 3".
    * 9b4b) Cutoff formats for this event: "Best of 1" cutoff phase for "Best of 2" or "Best of X" (where X is 1 or 2) cutoff phase for "Mean of 3".
  • 9b5) 3x3x3 Multi-Blind.
    * 9b5a) Full round formats for this event: "Best of X" (where X is 1, 2, or 3).
    * 9b5b) Cutoff formats for this event: "Best of X" (where X is 1 or 2) cutoff phase for "Best of Y" (where Y is 2 or 3, and Y > X).
• 9f) The results of a round are measured as follows:
  • 9f1) All timed results under 10 minutes, except for 3x3x3 Multi-Blind, are measured and truncated down to hundredths of a second. All timed averages and means under 10 minutes are measured and rounded to the nearest hundredth of a second.
  • 9f2) All timed results, averages, and means over 10 minutes, as well as all times for 3x3x3 Multi-Blind results, are measured and rounded to the nearest second (e.g. X.49 becomes X, X.50 becomes X+1).
  • 9f4) The result of an attempt is recorded as DNF (Did Not Finish) if the attempt is disqualified or unsolved/unfinished.
    * 9f4a) If a competitor violates a regulation clearly enough that the attempt is certain to be disqualified, the judge should immediately stop the attempt. If the judge is uncertain or a dispute could be disruptive (e.g. because an extra attempt could delay the competition), the judge should consult the WCA Delegate.
  • 9f5) The result of an attempt is recorded as DNS (Did Not Start) if the competitor is eligible for an attempt but declines it.
  • 9f6) For "Best of X" rounds, each competitor is allotted X attempts. The best result of these attempts determines the competitor's ranking in the round.
  • 9f7) For "Best of X" rounds, a DNF or DNS is the worst possible result.
  • 9f8) For "Average of 5" rounds, competitors are allotted 5 attempts. Of these 5 attempts, the best and worst attempts are removed, and the arithmetic mean of the remaining 3 attempts determines the competitor's ranking in the round.
  • 9f9) For "Average of 5" rounds, one DNF or DNS is permitted to count as the competitor's worst result of the round. If a competitor has more than one DNF and/or DNS result in the round, their average result for the round is DNF.
  • 9f10) For "Mean of 3" rounds, competitors are allotted 3 attempts. The arithmetic mean of the 3 attempts determines the competitor's ranking in the round.
  • 9f11) For "Mean of 3" rounds, if the competitor has at least one DNF or DNS result, their average result for the round is DNF.
  • 9f12) For "Best of X" rounds, rankings are assessed based on the best result per competitor. The following are used to compare results:
    * 9f12a) For timed results, "better" is defined as the shorter time.
    * 9f12b) For 3x3x3 Fewest Moves, "better" is defined as the shorter solution length.
    * 9f12c) For 3x3x3 Multi-Blind, rankings are assessed based on the number of puzzles solved minus the number of puzzles not solved, where a greater difference is better. If the difference is less than 0, or if only 1 puzzle is solved, the attempt is considered unsolved (DNF). If competitors achieve the same result, rankings are assessed based on total time, where the shorter recorded time is better. If competitors achieve the same result and the same time, rankings are assessed based on the number of puzzles the competitors failed to solve, where fewer unsolved puzzles are better.
  • 9f13) For "Mean of 3" and "Average of 5" rounds, rankings are assessed based on the ordering of the averages/means of the competitors, where "better" is the smaller recorded result.
  • 9f14) For "Mean of 3" and "Average of 5" rounds, if two or more competitors achieve identical average/mean results, rankings are assessed based on the best attempt per competitor, where "better" is defined as the smaller recorded result.
  • 9f15) Competitors who achieve the same result in a round receive an identical ranking for the round.
• 9g) A Cutoff Round is a round with a "Best of X" cutoff phase and a cutoff requirement (e.g. "Best of 2" with a cutoff requirement of strictly better than 2 minutes). If the competitor satisfies the cutoff requirement in at least one of their cutoff phase attempts, they are eligible for the remaining attempts. Attempts from the cutoff phase count towards the full round format.
• 9i) Results of official WCA competitions must be listed on the WCA world rankings.
  • 9i1) The WCA recognizes the following types of regional records: national records, continental records, and world records.
  • 9i2) All the results of a round are considered to take place on the last calendar date of the round. If a regional record is broken multiple times on the same calendar date, only the best result is recognized as breaking that regional record.
  • 9i3) If the WCA Regulations for an event are changed, existing regional records stand until they are broken under the new WCA Regulations.
• 9j) Each event must be held at most once per competition.
• 9k) All competitors may participate in all events of a competition, except in cases specifically approved by the WCA Competition Announcement Team.
• 9l) Each round must be completed before any following round of the same event can start. Exception: Extra attempts may be given at any point during a competition to replace an attempt that was initially invalid.
• 9m) Events must have at most four rounds.
  • 9m1) Rounds with 99 or fewer competitors must have at most two subsequent rounds.
  • 9m2) Rounds with 15 or fewer competitors must have at most one subsequent round.
  • 9m3) Rounds with 7 or fewer competitors must not have subsequent rounds.
• 9o) Cutoff Rounds count as one round when counting the number of rounds per event.
• 9p) If an event has multiple rounds, then:
  • 9p1) At least 25% of competitors must be eliminated between consecutive rounds of the same event.
  • 9p2) The competitors who advance to the next round must be determined by ranking (best X competitors) or by result (all competitors with a better result than X) in the preceding round.
    * 9p2a) For each round, advancement conditions must be announced before the round starts, and should not be changed after it has begun. Changes must be made at the discretion of the WCA Delegate, who must carefully consider the fairness of the change.
  • 9p3) If a qualifying competitor withdraws from a round, they may be replaced by the best-ranked non-qualifying competitor from the preceding round.
• 9s) Each round of each event must have a time limit (see Regulation A1a).
• 9t) If any change occurs to the results of a competitor after the competition has ended (e.g. score-taking mistake, retroactive penalty), such that the competitor should not have advanced to the next round (or was not allowed to take part in the round), all results of this competitor for all subsequent rounds must be removed (see Regulation 9u).
  • 9t1) If this makes a round no longer compliant with Regulation 9p1, results of other competitors must not be removed.
  • 9t2) If this makes a round no longer compliant with Regulation 9m1, 9m2 or 9m3, any subsequent round must not be removed.
  • 9t3) If any change occurs to the result of a competitor, such that another competitor should not have advanced to the next round, the result of the second competitor must not be removed.
• 9u) A competition is considered to have ended if all the following requirements are met simultaneously:
  • 9u1) All the scheduled rounds in the WCA website are completed.
  • 9u2) The WCA Delegate has announced the end of the competition. If the WCA Delegate does not announce the end of the competition, either of the following takes the place of this announcement (whichever comes first):
    * 9u2a) All the listed WCA Delegates permanently leave the venue.
    * 9u2b) The end of the last calendar date of the competition is reached.

Article 10: Solved State

• 10b) Only the resting state of the puzzle, after the timer has been stopped, is considered.
• 10c) The puzzle may be in any orientation at the end of the solve.
• 10d) All parts of a puzzle must be physically attached to the puzzle and fully placed in their required positions. Exception: see Regulation 5b5.
• 10e) A puzzle is solved when all colored parts are reassembled and all parts are aligned within the limits specified below:
  • 10e1) For every two adjacent parts (e.g. two parallel, adjacent slices of a cube) of the puzzle that are misaligned by more than the limit described in Regulation 10f, the puzzle is considered to require one additional move to solve (see "Outer Block Turn Metric" in Article 12).
  • 10e2) If no further moves are required to bring the puzzle to its solved state, the puzzle is considered solved without penalty.
  • 10e3) If one move is required, the puzzle is considered solved with a time penalty (+2 seconds).
  • 10e4) If more than one move is required, the puzzle is considered unsolved (DNF).
• 10f) Limits of acceptable misalignment for puzzles:
  • 10f1) NxNxN Cubes: at most 45 degrees.
  • 10f2) Megaminx: at most 36 degrees.
  • 10f3) Pyraminx and Skewb: at most 60 degrees.
  • 10f4) Square-1: at most 45 degrees (U/D) or 90 degrees (/).
• 10h) Puzzles not specified in this article are judged according to the solved state as defined by the generally accepted goal of the puzzle.
  • 10h1) The solved state of Clock is achieved when all eighteen inner clock faces point to 12 o'clock.

Article 11: Incidents

• 11a) Incidents include:
  • 11a1) Incorrect execution of event procedures, by officials or competitors.
  • 11a2) Interference or facility interruptions (e.g. power failure, emergency alarm activation).
  • 11a3) Equipment malfunction.
• 11b) If an incident occurs, the WCA Delegate determines an impartial and appropriate course of action.
• 11d) If the WCA Regulations are not fully clear or if the incident is not covered by the WCA Regulations, then the WCA Delegate must make a decision based on fair sportsmanship (also see Regulation 11e3).
• 11e) The WCA Delegate may grant a competitor an extra attempt to replace an attempt affected by an incident. The competitor should appeal verbally or in writing to the judge and WCA Delegate at the time of the incident, before finishing the original attempt, to be eligible for an extra attempt. An appeal does not guarantee the competitor an extra attempt.
  • 11e1) If a competitor is granted an extra attempt, the extra attempt must be scrambled using a different scramble sequence. This scramble sequence must be generated using a current official version of an official WCA scramble program (see Regulation 4f).
  • 11e2) If a competitor is granted an extra attempt, the extra attempt should be done right after the attempt that caused it, and must replace the original regularly numbered attempt.
  • 11e3) If it is unclear whether an incident should result in an extra attempt, the competitor may be granted a provisional extra attempt that will be used only if it is later found that an extra attempt was appropriate (e.g. by a decision of the WRC).
• 11f) Decisions about an incident may be supported with video or photographic analysis, at the discretion of the WCA Delegate.
• 11g) The WCA Delegate must ensure that copies of the Regulations and Guidelines are available (e.g. printed, digital, or accessible via internet) to officials and competitors for consultation on any incidents.
• 11h) A WCA Delegate may require competitors in serious violation of Regulation 2k3 to leave the competition venue, taking into account the seriousness of the situation and the best possible course of action. If the competitor refuses to do so, they may face disciplinary action in the WCA.

Article 12: Notation

• 12a) Notation for NxNxN Cubes:
  • 12a1) Face Moves (outer slice):
    * 12a1a) Clockwise, 90 degrees: F (front face), B (back face), R (right face), L (left face), U (upper face), D (bottom face).
    * 12a1b) Counter-clockwise, 90 degrees: F', B', R', L', U', D'.
    * 12a1c) 180 degrees: F2, B2, R2, L2, U2, D2.
  • 12a2) Outer Block Moves (outer slice with adjacent inner slices). For each of the moves defined below, n is the total number of slices to move, which must be in the range 1 < n < N (where N is the number of layers in the puzzle). n may also be omitted, for an implicit value of n = 2 slices. Outer Block Moves are:
    * 12a2a) Clockwise, 90 degrees: nFw, nBw, nRw, nLw, nUw, nDw.
    * 12a2b) Counter-clockwise, 90 degrees: nFw', nBw', nRw', nLw', nUw', nDw'.
    * 12a2c) 180 degrees: nFw2, nBw2, nRw2, nLw2, nUw2, nDw2.
  • 12a4) Rotations (entire puzzle):
    * 12a4a) Clockwise, 90 degrees: x (same direction as R or L'), y (same direction as U or D'), z (same direction as F or B').
    * 12a4b) Counter-clockwise, 90 degrees: x' (same direction as R' or L), y' (same direction as U' or D), z' (same direction as F' or B).
    * 12a4c) 180 degrees: x2, y2, z2.
  • 12a5) Outer Block Turn Metric (OBTM) is defined as:
    * 12a5a) Each move of the categories Face Moves and Outer Block Moves is counted as 1 move.
    * 12a5b) Each move of the Rotations category is counted as 0 moves.
  • 12a6) Execution Turn Metric (ETM) is defined as: Each move of the categories Face Moves, Outer Block Moves, and Rotations is counted as 1 move.
• 12c) Notation for Square-1:
  • 12c1) Moves are applied with one of the two smallest surfaces of the equatorial slice on the left side of the front face.
  • 12c2) (X, Y) means: turn upper layer X times 30 degrees clockwise, turn bottom layer Y times 30 degrees clockwise. X and Y must be integers from -5 to 6, and cannot be both equal to 0.
  • 12c3) "/" means: turn the right half of the puzzle 180 degrees.
  • 12c4) Metric for Square-1: (X, Y) counts as one move, "/" counts as one move.
• 12d) Notation for Megaminx (scrambling notation only):
  • 12d1) Face Moves:
    * 12d1a) Clockwise, 72 degrees: U (upper face).
    * 12d1b) Counter-clockwise, 72 degrees: U' (upper face).
  • 12d2) Other moves are applied while keeping 3 pieces fixed at the top left of the puzzle:
    * 12d2c) Clockwise 144 degrees move of the whole puzzle except for the slice of top left three pieces: R++ (vertical slices), D++ (horizontal slices).
    * 12d2d) Counter-clockwise 144 degrees move of the whole puzzle except for the slice of top left three pieces: R-- (vertical slices), D-- (horizontal slices).
• 12e) Notation for Pyraminx:
  • 12e1) The puzzle is oriented with the bottom face completely horizontal and the front face facing the person who is holding the Pyraminx.
  • 12e2) Clockwise, 120 degrees: U (upper 2 layers), L (left 2 layers), R (right 2 layers), B (back 2 layers), u (upper vertex), l (left vertex), r (right vertex), b (back vertex).
  • 12e3) Counter-clockwise, 120 degrees: U' (upper 2 layers), L' (left 2 layers), R' (right 2 layers), B' (back 2 layers), u' (upper vertex), l' (left vertex), r' (right vertex), b' (back vertex).
• 12g) Notation for Clock:
  • 12g1) The puzzle is oriented with 12 o'clock on top, and either side in front.
  • 12g2) Move pins up: UR (top-right), DR (bottom-right), DL (bottom-left), UL (top-left), U (both top), R (both right), D (both bottom), L (both left), ALL (all).
  • 12g3) Turn a wheel next to an up-position pin and move all pins down afterwards: X+ (X clockwise turns), X- (X counter-clockwise turns).
  • 12g4) Turn around the puzzle so that 12 o'clock stays on top, and then move all pins down: y2.
• 12h) Notation for Skewb:
  • 12h1) The puzzle is oriented with three faces fully visible, where the upper face is on top.
  • 12h2) Clockwise, 120 degrees: R (the layer around the farthest visible bottom-right vertex), U (the layer around the farthest visible upper vertex), L (the layer around the farthest visible bottom-left vertex), B (the layer around the farthest non-visible back vertex).
  • 12h3) Counter-clockwise, 120 degrees: R' (the layer around the farthest visible bottom-right vertex), U' (the layer around the farthest visible upper vertex), L' (the layer around the farthest visible bottom-left vertex), B' (the layer around the farthest non-visible back vertex).
• 12i) Definition: A move is considered to be any change to the puzzle state in terms of the notation defined above, including misalignments beyond the limits described in Regulation 10f.

Article A: Speed Solving

• A1) Speed Solving attempts must abide by the following procedures.
  • A1a) The organization team must apply at least one kind of time limit (time limit per attempt and/or cumulative time limit) to each round.
    * A1a1) The default time limit is 10 minutes for each attempt in a round, though the organization team may announce a higher or lower time limit per attempt. In this case, the limit must be the same for all attempts in a round.
    * A1a2) For events other than 3x3x3 Fewest Moves and 3x3x3 Multi-Blind, the organization team may define a cumulative time limit. The cumulative time limit must either apply to all attempts in one round (e.g. 3 attempts with a cumulative time limit of 20 minutes), or to all attempts in a combination of rounds for different events. In this case, the time limit for a particular attempt is the time limit or the cumulative time limit minus the total time in other attempts counting towards the time limit so far (see Regulation A1a5), whichever is lower. If a round has an applicable cumulative time limit, it must have at most one.
    * A1a3) The time limits for all rounds must be announced before the competition, and should not be changed after any affected rounds have begun. Changes must be made at the discretion of the WCA Delegate, who must carefully consider the fairness of the change.
    * A1a4) The competitor must end each solve before the time limit for the attempt is reached. If a competitor's timer reaches the time limit for an attempt, the judge stops the solve immediately and records the result as DNF. Exception: 3x3x3 Multi-Blind (see Regulation H1b1).
    * A1a5) The time counting towards the time limit for an attempt is either the result after time penalties are applied (if the result was not DNF) or the time elapsed in the solve (if the result was DNF).
  • A1b) If the time limit for an attempt is greater than 10 minutes, a stopwatch must be used for timekeeping.
    * A1b1) A Stackmat must be used in addition to the stopwatch. Exception: for events without inspection where the competitor is expected to exceed 10 minutes, use of the Stackmat is optional.
    * A1b2) If a time from the Stackmat timer is available, it is the original recorded time. Otherwise (e.g. the Stackmat timer malfunctioned, ran for over 10 minutes or was not used at all), the stopwatch time is the original recorded time.
  • A1c) A competitor participating in an event must be able to fulfill the event's requirements (see Regulation 2k6).
• A2) Scrambling:
  • A2a) When called for a round, the competitor submits the puzzle, in its solved state, to the scrambler. The competitor then waits in their assigned Competitor Waiting Area until they are called to compete.
  • A2b) A scrambler scrambles the puzzle according to the regulations in Article 4.
    * A2b1) For Square-1, the organization team may enforce placing a thin object in the puzzle to prevent accidental moves from being applied before the start of the attempt. If these objects are used, the organization team should make an announcement before the round starts.
  • A2c) After the scrambler starts scrambling the puzzle, the competitor must not see the puzzle until the inspection phase starts.
    * A2c1) The scrambler places a cover over the scrambled puzzle that makes it impossible for any competitors or spectators to see any part of the puzzle. The cover remains over the puzzle until the start of the attempt.
  • A2d) When taking a puzzle from the scrambler, the judge briefly inspects the puzzle to ensure thorough scrambling of the puzzle. The judge raises any concerns with the scrambler, who then conducts a detailed check.
    * A2d1) The scrambler or an authorized judge must check the scrambled puzzle, and sign (or initial) the score sheet to affirm that they applied the correctly-numbered scramble sequence and checked that it matches the image (see Regulation 4g). Exception: for 6x6x6 Cube, 7x7x7 Cube, and Megaminx the scrambler may sign (or initial) to affirm that the puzzle is sufficiently scrambled (see Regulation 4g1).
  • A2e) The judge places the puzzle onto the mat in an arbitrary orientation while ensuring that it remains completely covered.
    * A2e1) The competitor is not permitted to request a specific orientation, and the judge must not influence the orientation they place the puzzle on the mat based on what they know or expect the puzzle state to be.
• A3) Inspection:
  • A3a) The competitor may inspect the puzzle at the start of each attempt.
    * A3a1) The competitor is allotted strictly less than 15 seconds to inspect the puzzle and start the solve.
  • A3b) The judge prepares the timer by turning it on and resetting if necessary. If a Generation 5 Pro Timer is in use, the judge must ensure it is set to 2-Pad mode. Separately, the judge also prepares a stopwatch for timing inspection (see Regulation A4d).
    * A3b1) When the judge believes the competitor is ready, the judge asks "READY?". The competitor must be ready to start the attempt within one minute from the moment they are asked, or else the competitor forfeits the attempt (DNS), at the discretion of the judge.
    * A3b2) The competitor starts the attempt by confirming that they are ready, and the judge uncovers the puzzle and starts timing the inspection.
    * A3b3) When 8 seconds of inspection have elapsed, the judge calls "8 SECONDS".
    * A3b4) When 12 seconds of inspection have elapsed, the judge calls "12 SECONDS".
    * A3b5) The judge stops timing inspection as soon as the competitor lifts their hands and starts the timer (see Regulation A4d).
  • A3c) The competitor may pick up the puzzle during inspection.
    * A3c1) The competitor must not apply moves or intentional changes in alignment during inspection. Penalty: disqualification of the attempt (DNF). Exception: see Regulation A3c2 and Regulation A3c5.
    * A3c2) If the parts of the puzzle are not fully aligned when the cover is removed, then the competitor may align the faces, as long as misalignments stay within the limits of Regulation 10f.
    * A3c3) The competitor may reset the timer before the start of the solve.
    * A3c4) For Square-1, if the use of a thin object inside the puzzle has been enforced by the organization team (see Regulation A2b1), the competitor may remove the object from the puzzle during inspection.
    * A3c5) For Square-1, the competitor should not be penalized for any accidental move made within the limits of Regulation 10f.
  • A3d) At the end of the inspection, the competitor places the puzzle on the mat, in any orientation. Penalty for placing it outside the mat: time penalty (+2 seconds).
• A4) Starting the solve:
  • A4b) The competitor uses their fingers to touch the elevated sensor surfaces of the Stackmat timer. The competitor's palms must be facing down, and located on the side of the timer that is closer to the competitor. Penalty: time penalty (+2 seconds).
    * A4b1) The competitor must have no physical contact with the puzzle while starting the solve. Penalty: time penalty (+2 seconds).
  • A4d) If a Stackmat timer is in use, the competitor should keep their hands on the timer until they see a green timer light. The timer is started when they remove their hand(s) from the timer. The competitor starts the solve by starting the timer.
    * A4d1) The competitor must start the solve within 15 seconds of the start of the inspection. Penalty: time penalty (+2 seconds).
    * A4d2) The competitor must start the solve within 17 seconds of the start of the inspection. Penalty: disqualification of the attempt (DNF).
    * A4d3) If a stopwatch is in use, the judge starts the stopwatch as soon as the competitor starts the solve.
  • A4e) Time penalties for starting the solve are cumulative.
• A5) During the solve:
  • A5a) While inspecting or solving the puzzle, the competitor must not communicate with anyone other than the judge or the WCA Delegate. Penalty: disqualification of the attempt (DNF). Exception: If the competitor does not gain an advantage by communicating with anyone other than the judge or the WCA Delegate, the result may stand, at the discretion of the WCA Delegate.
  • A5b) While inspecting or solving the puzzle, the competitor must not receive assistance from anyone or any object other than the surface (also see Regulation 2i). Penalty: disqualification of the attempt (DNF).
  • A5c) The competitor may hold the puzzle against the surface to help operate the puzzle (see Regulation 7f1d).
• A6) Stopping the solve:
  • A6a) The competitor releases the puzzle before stopping the solve, and stops the solve by stopping the timer. If a stopwatch is in use, the judge stops the stopwatch as soon as the competitor does this.
  • A6b) The competitor is responsible for stopping the Stackmat timer correctly.
    * A6b1) If the timer stops before the competitor has solved the puzzle and the timer shows a time strictly below 0.06 seconds, then the attempt is replaced by an extra attempt. A competitor forfeits the right to the additional attempt if the WCA Delegate determines that the timer was stopped deliberately.
    * A6b2) If the timer stops before the competitor has solved the puzzle and displays a time of 0.06 seconds or higher, then the attempt is disqualified (DNF). Exception: if the competitor can demonstrate that the timer malfunctioned, they may receive an extra attempt, at the discretion of the WCA Delegate.
  • A6c) The competitor must fully release the puzzle before stopping the timer. Penalty: disqualification of the attempt (DNF). Exception: If no move or any change in alignment has been applied after stopping the timer and before releasing the puzzle, a time penalty (+2 seconds) may be assigned instead, at the discretion of the judge.
  • A6d) The competitor must stop the Stackmat timer using both hands, placed flat on the sensors with palms down. Penalty: time penalty (+2 seconds).
  • A6e) After stopping the timer, the competitor must not touch, apply a move, or make any change in alignment to the puzzle, until the judge has inspected the puzzle.
    * A6e1) Penalty for applying a move to the puzzle after stopping the timer: disqualification of the attempt (DNF).
    * A6e2) Penalty for touching the puzzle after stopping the timer without applying any moves: time penalty (+2 seconds). Exception: if immediately after stopping the timer, the competitor briefly touches the puzzle without affecting its state, the time penalty may be lifted, at the discretion of the judge (see Regulation 11f).
  • A6f) The competitor must not reset the timer until both the competitor and the judge have signed the score sheet. Penalty: disqualification of the attempt (DNF), at the discretion of the judge.
    * A6f1) If the competitor resets the timer before the result has been completely recorded, the judge must not write down the result from memory or from video or photographic evidence, and must disqualify the attempt instead (DNF).
  • A6g) The judge determines whether the puzzle is solved. If the puzzle is misaligned, it must not be touched before the judge has determined its final state.
  • A6h) In case of a dispute, moves or alignments must not be applied to the puzzle before the dispute is resolved.
  • A6i) Time penalties for stopping the solve are cumulative.
• A7) Recording results:
  • A7a) The judge tells the competitor the result.
    * A7a1) The judge should indicate to the competitor that the puzzle is solved, or that a penalty will be applied.
  • A7b) The judge records the result on a score sheet and signs next to the result to acknowledge that the result is correct, complete, properly formatted, and clearly readable.
    * A7b1) If penalties are assigned, the judge records the original recorded time displayed on the timer, along with any penalties. The format should be "T + X = F", where T represents the time displayed on the timer (the "original recorded time"), X represents a sum of time penalties during the attempt, and F represents the final result (e.g. 17.65 + 4 = 21.65).
  • A7c) The competitor must check the recorded result, and sign (or initial) the score sheet to acknowledge that the result is correct, complete, properly formatted, and clearly readable. This finishes the attempt.
    * A7c1) If the competitor or the judge refuses to accept and sign the score sheet, the WCA Delegate must resolve the dispute.
    * A7c2) If the competitor intentionally signs (or otherwise marks) an attempt before they have begun it, they forfeit the attempt and the result will be considered DNS.
    * A7c3) If the competitor signs (or otherwise marks) an attempt after starting the attempt but before the judge has finished recording the result, the attempt will be considered unfinished (DNF).
    * A7c4) The competitor should not sign an attempt before the judge has recorded and signed the attempt. The competitor is ultimately responsible for ensuring that they and the judge have signed an attempt. If an attempt is found to be missing one or both signatures after the judge delivered the score sheet to the score taker (see Regulation A7f), it will be considered unfinished (DNF).
    * A7c5) Missing signatures found before the end of the competition (see Regulation 9u) may be added by the judge and/or the competitor, at the discretion of the WCA Delegate.
  • A7f) When a competitor's score sheet for a round is complete, the judge delivers the score sheet to the score taker.
  • A7g) At the discretion of the WCA Delegate, an incident or penalty caused by a competitor's inexperience may be replaced with an extra attempt.

Article B: Blindfolded Solving

• B1) Standard speed solving procedures are followed, as described in Article A (Speed Solving). Additional regulations that supersede the corresponding procedures in Article A are described below.
  • B1a) There is no inspection period (i.e. the solve starts at the same time as the attempt).
  • B1b) The competitor supplies their own blindfold.
• B2) Starting the attempt:
  • B2a) The judge resets the timer(s) as in Regulation A3b and indicates that they are ready for the competitor to start the attempt (e.g. placing the puzzle cover in front of the competitor, saying "READY", giving a thumbs-up signal). The competitor must start the attempt within one minute, else the competitor forfeits the attempt (DNS), at the discretion of the judge.
  • B2b) When using the Stackmat timer, the competitor uses their fingers to touch the elevated sensor surfaces of the timer. The competitor's palms must be facing down, and located on the side of the timer that is closer to them. Penalty: time penalty (+2 seconds).
  • B2c) When using the Stackmat timer, the competitor must have no physical contact with the puzzle or the puzzle cover while starting the attempt. Penalty: time penalty (+2 seconds).
  • B2d) When using the Stackmat timer, the competitor should keep their hands on the timer until they see a green timer light. The timer is started when they remove their hand(s) from the timer. The competitor starts the attempt and the solve by starting the timer.
    * B2d1) The competitor removes the cover from the puzzle after starting the timer.
    * B2d2) If a stopwatch is in use in addition to the Stackmat timer, the judge starts the stopwatch as soon as the competitor starts the solve.
  • B2f) When using a stopwatch as the only timer, the competitor confirms they are ready and starts the solve by lifting the cover. The judge starts the stopwatch as soon as the competitor starts the solve.
• B3) Memorization phase:
  • B3a) The competitor may pick up the puzzle during the memorization phase.
  • B3b) The competitor must not make physical notes. Penalty: disqualification of the attempt (DNF).
  • B3c) The competitor must not apply moves or intentional changes in alignment (see Regulation A3c2) to the puzzle during the memorization phase. Penalty: disqualification of the attempt (DNF).
  • B3d) If the parts of the puzzle are not fully aligned, then the competitor may align the faces, as long as misalignments stay within the limits of Regulation 10f (see Regulation A3c2).
• B4) Blindfolded phase:
  • B4a) The competitor dons the blindfold to start the blindfolded phase.
    * B4a1) Until the competitor applies the first move to the puzzle, they may remove the blindfold to return to the memorization phase.
  • B4b) The competitor must not apply moves or intentional changes in alignment to the puzzle before they have fully donned the blindfold. Penalty: disqualification of the attempt (DNF).
  • B4c) As soon as the competitor applies the first move to the puzzle, the judge must ensure that there is a sight blocker (e.g. a sheet of paper or cardboard) between the competitor's face and the puzzle.
    * B4c1) In all cases, the competitor must wear the blindfold such that their view of the puzzle would still clearly be blocked if the sight blocker were not in the way.
    * B4c3) If the judge and competitor agree beforehand, the competitor may choose to place the puzzle behind a suitable object (e.g. a music stand, the surface of the table) by themselves during the blindfolded phase.
  • B4d) The competitor must not look at the puzzle at any point during the blindfolded phase. Penalty: disqualification of the attempt (DNF).
• B5) Stopping the solve:
  • B5a) When using the Stackmat timer, the competitor stops the solve by releasing the puzzle and then stopping the timer.
    * B5a1) If a stopwatch is in use in addition to the Stackmat timer, the judge stops the stopwatch as soon as the competitor stops the solve.
  • B5b) When using a stopwatch as the only timer, the competitor stops the solve by releasing the puzzle and notifying the judge that they have stopped the solve. The judge stops the stopwatch as soon as the competitor does this.
    * B5b1) The competitor's default notification signal consists of releasing the puzzle(s) from their hands and placing their hands on the surface, with palms down. The competitor and the judge may agree on another appropriate notification before the start of the attempt.
  • B5c) If the competitor is not touching the puzzle, they may remove the blindfold before they stop the timer. They must not touch the puzzle until the end of the solve. Penalty for touching the puzzle: disqualification of the attempt (DNF).

Article C: One-Handed Solving

• C1) Standard speed solving procedures are followed, as described in Article A (Speed Solving). Additional regulations that supersede the corresponding procedures in Article A are described below.
  • C1b) During the solve, the competitor must use only one hand to operate the puzzle. Penalty: disqualification of the attempt (DNF).
    * C1b2) If a puzzle defect occurs, and the competitor chooses to repair it, they must repair it using only the solving hand. Penalty: disqualification of the attempt (DNF).
    * C1b3) If other body parts of the competitor come in contact with the puzzle or parts of the puzzle without the competitor's intention and without applying moves, this is not considered operating the puzzle, at the discretion of the judge.
    * C1b4) During the solve, the competitor may hold the puzzle against the surface to help operate the puzzle (see Regulation 7f1d).
  • C1c) During the solve, once a competitor operates the puzzle with one hand, they must not operate the puzzle with the other hand. Penalty: disqualification of the attempt (DNF).

Article E: Fewest Moves Solving

• E2) Procedure for 3x3x3 Fewest Moves:
  • E2a) The judge distributes a scramble sequence and paper to all competitors. The judge then starts the stopwatch and calls "GO".
    * E2a1) Before the attempt has begun, the competitor must not write on any paper intended for the attempt. Exception: the competitor may write information to identify the attempt (see Regulation E2c1). If they write this information on the paper that contains the scramble sequence, they must write only on the side without the scramble sequence before the attempt. Penalty for writing anything other than information to identify the attempt: disqualification of the attempt (DNF).
  • E2b) All competitors have a total time limit of 60 minutes to find and write a solution.
    * E2b1) The judge should call "5 MINUTES REMAINING" at 55 minutes, and must call "STOP" at 60 minutes.
  • E2c) At 60 minutes, each competitor must submit to the judge a single piece of paper with a written solution and information to identify the attempt.
    * E2c1) Information to identify the attempt is: the competitor's name, WCA ID, or competition registrant ID (at least one, optionally multiple), and optionally the competition name, round, or attempt number. Penalty for a submitted solution without name, WCA ID, or competition registrant ID: disqualification of the attempt (DNF).
    * E2c2) The solution must be a single unambiguous move sequence with each individual move written out in sequential order. Penalty for an ambiguous solution: disqualification of the attempt (DNF).
    * E2c3) The competitor should clearly black out/scribble out all moves on the paper that are not part of their intended solution.
    * E2c4) The competitor's solution must only use moves that are exactly defined as notation for the 3x3x3 Cube in Regulation 12a, and must not use any symbols or combinations of symbols that are not specifically defined there. Penalty: disqualification of the attempt (DNF).
    * E2c5) The competitor's solution is considered correct if starting with a solved puzzle and applying the scramble sequence followed by the solution results in a solved puzzle. Penalty for an incorrect solution: disqualification of the attempt (DNF).
  • E2d) The competitor's result is the number of moves in their solution, calculated using Outer Block Turn Metric (see Regulation 12a5).
    * E2d1) The competitor's solution must not exceed 80 moves (including rotations) when calculated using Execution Turn Metric (see Regulation 12a6). Penalty: disqualification of the attempt (DNF).
  • E2e) The competitor's solution must not be directly derived from any part of the scramble sequence. Penalty: disqualification of the attempt (DNF), at the discretion of the WCA Delegate.
    * E2e1) The WCA Delegate may ask the competitor to explain the purpose of each move in their solution, irrespective of the scramble sequence. If the competitor cannot give a valid explanation, the attempt is disqualified (DNF).
• E3) The competitor may use the following objects during the attempt. Penalty for using unauthorized objects: disqualification of the attempt (DNF).
  • E3a) Paper (supplied by the judge), the solution sheet (supplied by the judge), a picture of the scramble for that attempt (which may be included on the paper or solution sheet), and pens/pencils or similar (supplied by the judge, or optionally self-supplied).
  • E3b) 3x3x3 Cubes (at most 3, self-supplied), which must be as described in Article 3 before starting the attempt.
  • E3c) Stickers (self-supplied).
  • E3d) Stopwatch or watch (self-supplied) for keeping track of the elapsed time, if it is approved by the WCA Delegate.
  • E3e) Other non-electronic aids that do not give an unfair advantage, at the discretion of the WCA Delegate (see Regulation 2i1).
  • E3f) Tools to remove markings (self-supplied), such as correction fluid, correction tape, or erasers.
• E4) The WCA Delegate may choose to publish the solutions (e.g. photo of the score sheets or transcriptions of solutions).
• E5) The competitor must not communicate with anyone other than the WCA Delegate or the judge. This communication should be about the WCA Regulations and the competitor must not receive assistance deriving their solution. Penalty: disqualification of the attempt (DNF).

Article F: Clock Solving

• F1) Standard speed solving procedures are followed, as described in Article A (Speed Solving). Additional regulations that supersede the corresponding procedures in Article A are described below.
• F2) The organization team may enforce using a stand for the puzzle to prevent it from falling before the start of the attempt. If such stands are used, the organization team should make an announcement before the round starts.
• F3) The competitor may change the state of the pins during the inspection. These changes are not counted as moves.
• F4) The competitor must not change the state of any inner clock faces in the puzzle during the inspection. Penalty: disqualification of the attempt (DNF).

Article H: Multi-Blind Solving

• H1) Standard blindfolded solving procedures are followed, as described in Article B (Blindfolded Solving). Additional regulations that supersede the corresponding procedures in Article B are described below.
  • H1a) Before an attempt, the competitor must submit to the organization team the number of puzzles (at least 2) they wish to attempt.
    * H1a1) A competitor is not permitted to change the number of puzzles after submitting their number to the organization team.
    * H1a2) A competitor may request to keep their submission private until all competitors have submitted their numbers. Once all competitors have reported their numbers, the information becomes public (e.g. a competitor may ask for the numbers of any other competitors before starting their attempt).
    * H1a3) Before the attempt, the scrambled puzzles must be placed on the table in an arbitrary orientation while ensuring they remain completely covered. The puzzles should be arranged in a shape as square as possible (e.g. 8 puzzles should be arranged in 2 rows with 3 puzzles and 1 row with 2 puzzles).
  • H1b) If a competitor is attempting fewer than 6 puzzles, they are allotted a time limit of 10 minutes times the number of puzzles in the attempt, else the time limit is 60 minutes.
    * H1b1) The competitor may signal the end of the solve at any time. If and when the time limit is reached, the judge stops the attempt and the attempt is then scored; the time limit for the attempt counts as the original recorded time.
  • H1d) Time penalties for the puzzles of the attempt are cumulative.
  • H1e) The competitor must not apply any moves to one or more puzzles during the memorization phase. Penalty: disqualification of the attempt (DNF). Exception: these individual puzzles may be considered unsolved at the end of the attempt instead of disqualifying the entire attempt, at the discretion of the WCA Delegate.
• H2) The competitor may self supply a flat covering (e.g. a mat or a cloth) for the surface, at the discretion of the WCA Delegate. If the competitor wishes to do so, the request must be made at the same time as submitting the number of puzzles (see Regulation H1a).

Cookies help us deliver our services. By using our services, you agree to our use of cookies.