Creating a Simple Web Service and Clients with JAX-WS (original) (raw)

This section shows how to build and deploy a simple web service and two clients: an application client and a web client. The source code for the service is in the tut-install/examples/jaxws/helloservice/ directory, and the clients are in the_tut-install_/examples/jaxws/appclient/ and tut-install/examples/jaxws/webclient/ directories.

Figure 19-1 illustrates how JAX-WS technology manages communication between a web service and a client.

Figure 19-1 Communication between a JAX-WS Web Service and a Client

Diagram showing a client and web service communicating through a SOAP message.

The starting point for developing a JAX-WS web service is a Java class annotated with the javax.jws.WebService annotation. The @WebService annotation defines the class as a web service endpoint.

A service endpoint interface or service endpoint implementation (SEI) is a Java interface or class, respectively, that declares the methods that a client can invoke on the service. An interface is not required when building a JAX-WS endpoint. The web service implementation class implicitly defines an SEI.

You may specify an explicit interface by adding the endpointInterface element to the @WebService annotation in the implementation class. You must then provide an interface that defines the public methods made available in the endpoint implementation class.

The basic steps for creating a web service and client are as follows:

Code the implementation class.
Compile the implementation class.
Package the files into a WAR file.
Deploy the WAR file. The web service artifacts, which are used to communicate with clients, are generated by the GlassFish Server during deployment.
Code the client class.
Use a wsimport Ant task to generate and compile the web service artifacts needed to connect to the service.
Compile the client class.
Run the client.

If you use NetBeans IDE to create a service and client, the IDE performs the wsimport task for you.

The sections that follow cover these steps in greater detail.

Requirements of a JAX-WS Endpoint

JAX-WS endpoints must follow these requirements.

The implementing class must be annotated with either the javax.jws.WebService or the javax.jws.WebServiceProvider annotation.
The implementing class may explicitly reference an SEI through the endpointInterface element of the @WebService annotation but is not required to do so. If no endpointInterface is specified in @WebService, an SEI is implicitly defined for the implementing class.
The business methods of the implementing class must be public and must not be declared static or final.
Business methods that are exposed to web service clients must be annotated with javax.jws.WebMethod.
Business methods that are exposed to web service clients must have JAXB-compatible parameters and return types. See the two tables of JAXB default data type bindings in Types Supported by JAX-WS.
The implementing class must not be declared final and must not be abstract.
The implementing class must have a default public constructor.
The implementing class must not define the finalize method.
The implementing class may use the javax.annotation.PostConstruct or the javax.annotation.PreDestroy annotations on its methods for lifecycle event callbacks.
The @PostConstruct method is called by the container before the implementing class begins responding to web service clients.
The @PreDestroy method is called by the container before the endpoint is removed from operation.

Coding the Service Endpoint Implementation Class

In this example, the implementation class, Hello, is annotated as a web service endpoint using the @WebService annotation. Hello declares a single method named sayHello, annotated with the @WebMethod annotation, which exposes the annotated method to web service clients. The sayHello method returns a greeting to the client, using the name passed to it to compose the greeting. The implementation class also must define a default, public, no-argument constructor.

package helloservice.endpoint;

import javax.jws.WebService; import javax.jws.WebMethod;

@WebService public class Hello { private String message = new String("Hello, ");

public void Hello() {
}

@WebMethod
public String sayHello(String name) {
    return message + name + ".";
}

}

Building, Packaging, and Deploying the Service

You can use either NetBeans IDE or Ant to build, package, and deploy the helloservice application.

To Build, Package, and Deploy the Service Using NetBeans IDE

From the File menu, choose Open Project.
In the Open Project dialog, navigate to:
tut-install/examples/jaxws/
Select the helloservice folder.
Select the Open as Main Project check box.
Click Open Project.
In the Projects tab, right-click the helloservice project and select Deploy.
This command builds and packages the application into helloservice.war, located in tut-install/examples/jaxws/helloservice/dist/, and deploys this WAR file to the GlassFish Server.

Next Steps

You can view the WSDL file of the deployed service by requesting the URL http://localhost:8080/helloservice/HelloService?wsdl in a web browser. Now you are ready to create a client that accesses this service.

To Build, Package, and Deploy the Service Using Ant

In a terminal window, go to:
tut-install/examples/jaxws/helloservice/
Type the following command:
ant
This command calls the default target, which builds and packages the application into a WAR file, helloservice.war, located in the dist directory.
Make sure that the GlassFish Server is started.
Type the following:
ant deploy

Next Steps

Testing the Methods of a Web Service Endpoint

GlassFish Server allows you to test the methods of a web service endpoint.

To Test the Service without a Client

To test the sayHello method of HelloService, follow these steps.

Open the web service test interface by typing the following URL in a web browser:
http://localhost:8080/helloservice/HelloService?Tester
Under Methods, type a name as the parameter to the sayHello method.
Click the sayHello button.
This takes you to the sayHello Method invocation page.
Under Method returned, you’ll see the response from the endpoint.

A Simple JAX-WS Application Client

The HelloAppClient class is a stand-alone application client that accesses the sayHello method of HelloService. This call is made through a port, a local object that acts as a proxy for the remote service. The port is created at development time by the wsimport task, which generates JAX-WS portable artifacts based on a WSDL file.

Coding the Application Client

When invoking the remote methods on the port, the client performs these steps:

Uses the generated helloservice.endpoint.HelloService class, which represents the service at the URI of the deployed service’s WSDL file:
import helloservice.endpoint.HelloService;
import javax.xml.ws.WebServiceRef;
public class HelloAppClient {
@WebServiceRef(wsdlLocation =
"META-INF/wsdl/localhost_8080/helloservice/HelloService.wsdl")
private static HelloService service;
Retrieves a proxy to the service, also known as a port, by invoking getHelloPort on the service:
helloservice.endpoint.Hello port = service.getHelloPort();
The port implements the SEI defined by the service.
Invokes the port’s sayHello method, passing a string to the service:
return port.sayHello(arg0);

Here is the full source of HelloAppClient, which is located in the following directory:

tut-install/examples/jaxws/appclient/src/appclient/

package appclient;

import helloservice.endpoint.HelloService; import javax.xml.ws.WebServiceRef;

public class HelloAppClient { @WebServiceRef(wsdlLocation = "META-INF/wsdl/localhost_8080/helloservice/HelloService.wsdl") private static HelloService service;

/**
 * @param args the command line arguments
 */
public static void main(String[] args) {
   System.out.println(sayHello("world"));
}

private static String sayHello(java.lang.String arg0) {
    helloservice.endpoint.Hello port = service.getHelloPort();
    return port.sayHello(arg0);
}

}

Running the Application Client

You can use either NetBeans IDE or Ant to build, package, deploy, and run the appclient application. To build the client, you must first have deployedhelloservice, as described in Building, Packaging, and Deploying the Service.

To Run the Application Client Using NetBeans IDE

From the File menu, choose Open Project.
In the Open Project dialog, navigate to:
tut-install/examples/jaxws/
Select the appclient folder.
Select the Open as Main Project check box.
Click Open Project.
In the Projects tab, right-click the appclient project and select Run.
You will see the output of the application client in the Output pane.

To Run the Application Client Using Ant

In a terminal window, go to:
tut-install/examples/jaxws/appclient/
Type the following command:
ant
This command calls the default target, which runs the wsimport task and builds and packages the application into a JAR file, appclient.jar, located in the distdirectory.
Type the following command:
ant getclient
This command deploys the appclient.jar file and retrieves the client stubs.
To run the client, type the following command:
ant run

A Simple JAX-WS Web Client

HelloServlet is a servlet that, like the Java client, calls the sayHello method of the web service. Like the application client, it makes this call through a port.

Coding the Servlet

To invoke the method on the port, the client performs these steps:

Imports the HelloService endpoint and the WebServiceRef annotation:
import helloservice.endpoint.HelloService;
...
import javax.xml.ws.WebServiceRef;
Defines a reference to the web service by specifying the WSDL location:
@WebServiceRef(wsdlLocation =
"WEB-INF/wsdl/localhost_8080/helloservice/HelloService.wsdl")
Declares the web service, then defines a private method that calls the sayHello method on the port:
private HelloService service;
...
private String sayHello(java.lang.String arg0) {
helloservice.endpoint.Hello port = service.getHelloPort();
return port.sayHello(arg0);
}
In the servlet, calls this private method:
out.println("
" + sayHello("world") + "
");

The significant parts of the HelloServlet code follow. The code is located in the tut-install/examples/jaxws/src/java/webclient/ directory.

package webclient;

import helloservice.endpoint.HelloService; import java.io.IOException; import java.io.PrintWriter; import javax.servlet.ServletException; import javax.servlet.annotation.WebServlet; import javax.servlet.http.HttpServlet; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; import javax.xml.ws.WebServiceRef;

@WebServlet(name="HelloServlet", urlPatterns={"/HelloServlet"}) public class HelloServlet extends HttpServlet { @WebServiceRef(wsdlLocation = "WEB-INF/wsdl/localhost_8080/helloservice/HelloService.wsdl") private HelloService service;

/** 
 * Processes requests for both HTTP <code>GET</code> 
 *   and <code>POST</code> methods.
 * @param request servlet request
 * @param response servlet response
 * @throws ServletException if a servlet-specific error occurs
 * @throws IOException if an I/O error occurs
 */
protected void processRequest(HttpServletRequest request, 
        HttpServletResponse response)
throws ServletException, IOException {
    response.setContentType("text/html;charset=UTF-8");
    PrintWriter out = response.getWriter();
    try {
        
        out.println("<html lang=\"en\">");
        out.println("<head>");
        out.println("<title>Servlet HelloServlet</title>");  
        out.println("</head>");
        out.println("<body>");
        out.println("<h1>Servlet HelloServlet at " + 
            request.getContextPath () + "</h1>");
        out.println("<p>" + sayHello("world") + "</p>");
        out.println("</body>");
        out.println("</html>");
        
    } finally { 
        out.close();
    }
} 

// doGet and doPost methods, which call processRequest, and
//   getServletInfo method

private String sayHello(java.lang.String arg0) {
    helloservice.endpoint.Hello port = service.getHelloPort();
    return port.sayHello(arg0);
}

}

Running the Web Client

You can use either NetBeans IDE or Ant to build, package, deploy, and run the webclient application. To build the client, you must first have deployedhelloservice, as described in Building, Packaging, and Deploying the Service.

To Run the Web Client Using NetBeans IDE

From the File menu, choose Open Project.
In the Open Project dialog, navigate to:
tut-install/examples/jaxws/
Select the webclient folder.
Select the Open as Main Project check box.
Click Open Project.
In the Projects tab, right-click the webclient project and select Deploy.
This task runs the wsimport tasks, builds and packages the application into a WAR file, webclient.war, located in the dist directory, and deploys it to the server.
In a web browser, navigate to the following URL:
http://localhost:8080/webclient/HelloServlet
The output of the sayHello method appears in the window.

To Run the Web Client Using Ant

In a terminal window, go to:
tut-install/examples/jaxws/webclient/
Type the following command:
ant
This command calls the default target, which runs the wsimport tasks, then builds and packages the application into a WAR file, webclient.war, located in thedist directory.
Type the following command:
ant deploy
This task deploys the WAR file to the server.
In a web browser, navigate to the following URL:
http://localhost:8080/webclient/HelloServlet
The output of the sayHello method appears in the window.