4.3.2 Generic Numerics (original) (raw)

4.3.2 Generic Numerics🔗ℹ

Most Racket numeric operations work on any kind of number.

4.3.2.1 Arithmetic🔗ℹ

Returns the sum of the zs, adding pairwise from left to right. If no arguments are provided, the result is 0.

Examples:

> (+ 1 2)
3
> (+ 1.0 2+3i 5)
8.0+3.0i
> (+)
0

When no ws are supplied, returns (- 0 z). Otherwise, returns the subtraction of the ws from z working pairwise from left to right.

Examples:

> (- 5 3.0)
2.0
> (- 1)
-1
> (- 2+7i 1 3)
-2+7i

Returns the product of the zs, multiplying pairwise from left to right. If no arguments are provided, the result is1. Multiplying any number by exact 0 produces exact0.

Examples:

> (* 2 3)
6
> (* 8.0 9)
72.0
> (* 1+2i 3+4i)
-5+10i

When no ws are supplied, returns (/ 1 z). Otherwise, returns the division of z by the ws working pairwise from left to right.

If z is exact 0 and no w is exact0, then the result is exact 0. If any w is exact 0, the exn:fail:contract:divide-by-zero exception is raised.

Examples:

> (/ 3 4)
3/4
> (/ 81 3 3)
9
> (/ 10.0)
0.1
> (/ 1+2i 3+4i)
11/25+2/25i

Returns (truncate (/ n m)).

Examples:

> (quotient 10 3)
3
> (quotient -10.0 3)
-3.0
> (quotient +inf.0 3)
quotient: contract violation
expected: integer?
given: +inf.0

Returns q with the same sign as n such that

If m is exact 0, theexn:fail:contract:divide-by-zero exception is raised.

Examples:

> (remainder 10 3)
1
> (remainder -10.0 3)
-1.0
> (remainder 10.0 -3)
1.0
> (remainder -10 -3)
-1
> (remainder +inf.0 3)
remainder: contract violation
expected: integer?
given: +inf.0

Returns (values (quotient n m) (remainder n m)), but the combination may be computed more efficiently than separate calls toquotient and remainder.

Example:

> (quotient/remainder 10 3)

Returns q with the same sign as m where

If m is exact 0, theexn:fail:contract:divide-by-zero exception is raised.

Examples:

> (modulo 10 3)
1
> (modulo -10.0 3)
2.0
> (modulo 10.0 -3)
-2.0
> (modulo -10 -3)
-1
> (modulo +inf.0 3)
modulo: contract violation
expected: integer?
given: +inf.0

Returns (+ z 1).

Returns (- z 1).

Returns the absolute value ofx.

Examples:

> (abs 1.0)
1.0
> (abs -1)
1

Returns the largest of the xs, or +nan.0 if anyx is +nan.0. If any x is inexact, the result is coerced to inexact. See also argmax.

Examples:

> (max 1 3 2)
3
> (max 1 3 2.0)
3.0

Returns the smallest of the xs, or +nan.0 if anyx is +nan.0. If any x is inexact, the result is coerced to inexact. See also argmin.

Examples:

> (min 1 3 2)
1
> (min 1 3 2.0)
1.0

Returns the greatest common divisor (a non-negative number) of the ns; for non-integer ns, the result is the gcd of the numerators divided by the lcm of the denominators. If no arguments are provided, the result is 0. If all arguments are zero, the result is zero.

Examples:

> (gcd 10)
10
> (gcd 12 81.0)
3.0
> (gcd 1/2 1/3)
1/6

Returns the least common multiple (a non-negative number) of the ns; non-integer ns, the result is the absolute value of the product divided by thegcd. If no arguments are provided, the result is1. If any argument is zero, the result is zero; furthermore, if any argument is exact 0, the result is exact 0.

Examples:

> (lcm 10)
10
> (lcm 3 4.0)
12.0
> (lcm 1/2 2/3)
2

Returns the integer closest to x, resolving ties in favor of an even number, but +inf.0, -inf.0, and +nan.0 round to themselves.

Examples:

> (round 17/4)
4
> (round -17/4)
-4
> (round 2.5)
2.0
> (round -2.5)
-2.0
> (round +inf.0)
+inf.0

Returns the largest integer that is no more than x, but+inf.0, -inf.0, and +nan.0 floor to themselves.

Examples:

> (floor 17/4)
4
> (floor -17/4)
-5
> (floor 2.5)
2.0
> (floor -2.5)
-3.0
> (floor +inf.0)
+inf.0

Returns the smallest integer that is at least as large as x, but +inf.0, -inf.0, and +nan.0 ceiling to themselves.

Examples:

> (ceiling 17/4)
5
> (ceiling -17/4)
-4
> (ceiling 2.5)
3.0
> (ceiling -2.5)
-2.0
> (ceiling +inf.0)
+inf.0

Returns the integer farthest from 0 that is not farther from0 than x, but +inf.0, -inf.0, and+nan.0 truncate to themselves.

Examples:

> (truncate 17/4)
4
> (truncate -17/4)
-4
> (truncate 2.5)
2.0
> (truncate -2.5)
-2.0
> (truncate +inf.0)
+inf.0

Coerces q to an exact number, finds the numerator of the number expressed in its simplest fractional form, and returns this number coerced to the exactness of q.

Examples:

> (numerator 5)
5
> (numerator 17/4)
17
> (numerator 2.3)
2589569785738035.0

Coerces q to an exact number, finds the denominator of the number expressed in its simplest fractional form, and returns this number coerced to the exactness of q.

Examples:

> (denominator 5)
1
> (denominator 17/4)
4
> (denominator 2.3)
1125899906842624.0

Among the real numbers within (abs tolerance) of x, returns the one corresponding to an exact number whosedenominator is the smallest. If multiple integers are withintolerance of x, the one closest to 0 is used.

Examples:

> (rationalize 1/4 1/10)
1/3
> (rationalize -1/4 1/10)
-1/3
> (rationalize 1/4 1/4)
0
> (rationalize 11/40 1/4)
1/2
4.3.2.2 Number Comparison🔗ℹ

Returns#t if all of the arguments are numerically equal,#f otherwise. An inexact number is numerically equal to an exact number when the exact coercion of the inexact number is the exact number. Also, 0.0 and -0.0 are numerically equal, but +nan.0 is not numerically equal to itself.

Examples:

> (= 1 1.0)
#t
> (= 1 2)
#f
> (= 2+3i 2+3i 2+3i)
#t
> (= 1)
#t

Changed in version 7.0.0.13 of package base: Allow one argument, in addition to allowing two or more.

Returns #t if the arguments in the given order are strictly increasing,#f otherwise.

Examples:

> (< 1 1)
#f
> (< 1 2 3)
#t
> (< 1)
#t
> (< 1 +inf.0)
#t
> (< 1 +nan.0)
#f

Changed in version 7.0.0.13 of package base: Allow one argument, in addition to allowing two or more.

Returns #t if the arguments in the given order are non-decreasing,#f otherwise.

Examples:

> (<= 1 1)
#t
> (<= 1 2 1)
#f

Changed in version 7.0.0.13 of package base: Allow one argument, in addition to allowing two or more.

Returns #t if the arguments in the given order are strictly decreasing,#f otherwise.

Examples:

> (> 1 1)
#f
> (> 3 2 1)
#t
> (> +inf.0 1)
#t
> (> +nan.0 1)
#f

Changed in version 7.0.0.13 of package base: Allow one argument, in addition to allowing two or more.

Returns #t if the arguments in the given order are non-increasing,#f otherwise.

Examples:

> (>= 1 1)
#t
> (>= 1 2 1)
#f

Changed in version 7.0.0.13 of package base: Allow one argument, in addition to allowing two or more.

4.3.2.3 Powers and Roots🔗ℹ

Returns the principal square root of z. The result is exact if z is exact and z’s square root is rational. See also integer-sqrt.

Examples:

> (sqrt 4/9)
2/3
> (sqrt 2)
1.4142135623730951
> (sqrt -1)
0+1i

Returns (floor (sqrt n)) for positive n. The result is exact if n is exact. For negative n, the result is (* (integer-sqrt (- n)) 0+1i).

Examples:

> (integer-sqrt 4.0)
2.0
> (integer-sqrt 5)
2
> (integer-sqrt -4.0)
0.0+2.0i
> (integer-sqrt -4)
0+2i

Returns (integer-sqrt n) and (- n (expt (integer-sqrt n) 2)).

Examples:

Returns z raised to the power of w.

If w is exact 0, the result is exact 1. If w is 0.0 or -0.0 and z is a real number other than exact 1 or 0, the result is 1.0 (even if z is +nan.0).

If z is exact 1, the result is exact 1. If z is 1.0 and w is a real number, the result is 1.0 (even if w is +nan.0).

If z is exact 0, the result is as follows:

If w is exact 1/2, the result is the same as (sqrt z), which can be exact. Other fractional powers are not treated specially in this manner:

Examples:

> (expt 9 1/2)
3
> (expt 9 0.5)
3.0
> (expt 16 1/4)
2.0
> (expt 16 0.25)
2.0

Further special cases when w is a real number:These special cases correspond to pow in C99 [C99], except when z is negative and w is a not an integer.

Examples:

> (expt 2 3)
8
> (expt 4 0.5)
2.0
> (expt +inf.0 0)
1

Returns Euler’s number raised to the power of z. The result is normally inexact, but it is exact 1 when z is an exact 0. See also expt.

Examples:

> (exp 1)
2.718281828459045
> (exp 2+3i)
-7.315110094901103+1.0427436562359045i
> (exp 0)
1

Returns the natural logarithm of z. The result is normally inexact, but it is exact 0 when z is an exact1. When z is exact 0,exn:fail:contract:divide-by-zero exception is raised.

If b is provided, it serves as an alternative base. It is equivalent to (/ (log z) (log b)), but can potentially run faster. If b is exact1, exn:fail:contract:divide-by-zero exception is raised.

Consider using fllogb from math/flonum instead when accuracy is important.

Examples:

> (log (exp 1))
1.0
> (log 2+3i)
1.2824746787307684+0.982793723247329i
> (log 1)
0
> (log 100 10)
2.0
> (log 8 2)
3.0
> (log 5 5)
1.0

Changed in version 6.9.0.1 of package base: Added second argument for arbitrary bases.

4.3.2.4 Trigonometric Functions🔗ℹ

Returns the sine of z, where z is in radians. The result is normally inexact, but it is exact 0 if z is exact 0.

Examples:

> (sin 3.14159)
2.65358979335273e-6
> (sin 1.0+5.0i)
62.44551846769654+40.0921657779984i

Returns the cosine of z, where z is in radians.

Examples:

> (cos 3.14159)
-0.9999999999964793
> (cos 1.0+5.0i)
40.09580630629883-62.43984868079963i

Returns the tangent of z, where z is in radians. The result is normally inexact, but it is exact 0 if z is exact 0.

Examples:

> (tan 0.7854)
1.0000036732118496
> (tan 1.0+5.0i)
8.256719834229597e-5+1.0000377833796008i

Returns the arcsine in radians of z. The result is normally inexact, but it is exact 0 if z is exact 0.

Examples:

> (asin 0.25)
0.25268025514207865
> (asin 1.0+5.0i)
0.1937931365549322+2.3309746530493123i

Returns the arccosine in radians of z.

Examples:

> (acos 0.25)
1.318116071652818
> (acos 1.0+5.0i)
1.3770031902399644-2.3309746530493123i

In the one-argument case, returns the arctangent of the inexact approximation of z, except that the result is an exact0 for z as 0, and the exn:fail:contract:divide-by-zero exception is raised for z as exact 0+1i or exact 0-1i.

In the two-argument case, the result is roughly the same as (atan (/ (exact->inexact y)) (exact->inexact x)), but the signs of y and x determine the quadrant of the result. Moreover, a suitable angle is returned when y divided by x produces +nan.0 in the case that neither y norx is +nan.0. Finally, if y is exact0 and x is a positive number, the result is exact 0. If both x and y are exact0, the exn:fail:contract:divide-by-zero exception is raised.

Examples:

> (atan 0.5)
0.4636476090008061
> (atan 2 1)
1.1071487177940904
> (atan -2 -1)
-2.0344439357957027
> (atan 1.0+5.0i)
1.530881333938778+0.19442614214700213i
> (atan +inf.0 -inf.0)
2.356194490192345

Changed in version 7.2.0.2 of package base: Changed to raise exn:fail:contract:divide-by-zerofor 0+1i and 0-1i and to produce exact 0for any positive x (not just exact values) when y is 0.

4.3.2.5 Complex Numbers🔗ℹ

Creates a complex number with x as the real part and y as the imaginary part. That is, returns (+ x (* y 0+1i)).

Example:

> (make-rectangular 3 4.0)
3.0+4.0i

Creates a complex number which, if thought of as a point, is magnitude away from the origin and is rotatedangle radians counter clockwise from the positive x-axis. That is, returns (+ (* magnitude (cos angle)) (* magnitude (sin angle) 0+1i)).

Examples:

> (make-polar 10 (* pi 1/2))
6.123233995736766e-16+10.0i
> (make-polar 10 (* pi 1/4))
7.0710678118654755+7.071067811865475i

Returns the real part of the complex number z in rectangle coordinates.

Examples:

> (real-part 3+4i)
3
> (real-part 5.0)
5.0

Returns the imaginary part of the complex number z in rectangle coordinates.

Examples:

> (imag-part 3+4i)
4
> (imag-part 5.0)
0
> (imag-part 5.0+0.0i)
0.0

Returns the magnitude of the complex number z in polar coordinates. A complex number with +inf.0 or -inf.0 as a component has magnitude +inf.0, even if the other component is +nan.0.

Examples:

> (magnitude -3)
3
> (magnitude 3.0)
3.0
> (magnitude 3+4i)
5

Changed in version 7.2.0.2 of package base: Changed to always return +inf.0for a complex number with a +inf.0or -inf.0 component.

Returns the angle of the complex number z in polar coordinates.

The result is guaranteed to be between (- pi) andpi, possibly equal to pi (but never equal to (- pi)).

Examples:

> (angle -3)
3.141592653589793
> (angle 3.0)
0
> (angle 3+4i)
0.9272952180016122
> (angle +inf.0+inf.0i)
0.7853981633974483
> (angle -1)
3.141592653589793
4.3.2.6 Bitwise Operations🔗ℹ

Returns the bitwise “inclusive or” of the ns in their (semi-infinite) two’s complement representation. If no arguments are provided, the result is 0.

Examples:

> (bitwise-ior 1 2)
3
> (bitwise-ior -32 1)
-31

Returns the bitwise “and” of the ns in their (semi-infinite) two’s complement representation. If no arguments are provided, the result is -1.

Examples:

> (bitwise-and 1 2)
0
> (bitwise-and -32 -1)
-32

Returns the bitwise “exclusive or” of the ns in their (semi-infinite) two’s complement representation. If no arguments are provided, the result is 0.

Examples:

> (bitwise-xor 1 5)
4
> (bitwise-xor -32 -1)
31

Returns the bitwise “not” of n in its (semi-infinite) two’s complement representation.

Examples:

> (bitwise-not 5)
-6
> (bitwise-not -1)
0

Returns #t when the mth bit of n is set in n’s (semi-infinite) two’s complement representation.

This operation is equivalent to(not (zero? (bitwise-and n (arithmetic-shift 1 m)))), but it is faster and runs in constant time when n is positive.

Examples:

> (bitwise-bit-set? 5 0)
#t
> (bitwise-bit-set? 5 2)
#t
> (bitwise-bit-set? -5 (expt 2 700))
#t

Extracts the bits between position start and (- end 1) (inclusive) from n and shifts them down to the least significant portion of the number.

This operation is equivalent to the computation

(bitwise-and (sub1 (arithmetic-shift 1 (- end start)))
(arithmetic-shift n (- start)))

but it runs in constant time when n is positive, start andend are fixnums, and (- end start) is no more than the maximum width of a fixnum.

Each pair of examples below uses the same numbers, showing the result both in binary and as integers.

Examples:

Returns the bitwise “shift” of n in its (semi-infinite) two’s complement representation. If m is non-negative, the integer n is shifted left by m bits; i.e., m new zeros are introduced as rightmost digits. Ifm is negative, n is shifted right by (- m) bits; i.e., the rightmost m digits are dropped.

Examples:

> (arithmetic-shift 1 10)
1024
> (arithmetic-shift 255 -3)
31

Returns the number of bits in the (semi-infinite) two’s complement representation of n after removing all leading zeros (for non-negative n) or ones (for negative n).

Examples:

> (integer-length 8)
4
> (integer-length -8)
3
4.3.2.7 Random Numbers🔗ℹ

When called with an integer argument k, returns a random exact integer in the range 0 to k-1.

When called with two integer arguments min and max, returns a random exact integer in the range min to max-1.

When called with zero arguments, returns a random inexact number between0 and 1, exclusive.

In each case, the number is provided by the given pseudo-random number generator (which defaults to the current one, as produced bycurrent-pseudo-random-generator). The generator maintains an internal state for generating numbers. The random number generator uses L’Ecuyer’s MRG32k3a algorithm [L'Ecuyer02] that has a state space of practically 192 bits.

When security is a concern, use crypto-random-bytesinstead of random.

The racket/math library provides additional functions for random number generationwithout the limit of 4294967087.

Changed in version 6.4 of package base: Added support for ranges.

Seeds the current pseudo-random number generator withk. Seeding a generator sets its internal state deterministically; that is, seeding a generator with a particular number forces it to produce a sequence of pseudo-random numbers that is the same across runs and across platforms.

The random-seed function is convenient for some purposes, but note that the space of states for a pseudo-random number generator is much larger that the space of allowed values for k. Usevector->pseudo-random-generator! to set a pseudo-random number generator to any of its possible states.

Returns a new pseudo-random number generator. The new generator is seeded with a number derived from (current-milliseconds).

Returns #t if v is a pseudo-random number generator,#f otherwise.

A parameter that determines the pseudo-random number generator used by random.

Produces a vector that represents the complete internal state ofrand-gen. The vector is suitable as an argument tovector->pseudo-random-generator to recreate the generator in its current state (across runs and across platforms).

Produces a pseudo-random number generator whose internal state corresponds to vec.

Like vector->pseudo-random-generator, but changesrand-gen to the given state, instead of creating a new generator.

Returns #t if v is a vector of six exact integers, where the first three integers are in the range 0 to4294967086, inclusive; the last three integers are in the range 0 to 4294944442, inclusive; at least one of the first three integers is non-zero; and at least one of the last three integers is non-zero. Otherwise, the result is #f.

4.3.2.8 Other Randomness Utilities🔗ℹ

Provides an interface to randomness from the underlying operating system. Usecrypto-random-bytes instead of random wherever security is a concern.

Returns n random bytes. On Unix systems, the bytes are obtained from "/dev/urandom", while Windows uses the RtlGenRand system function.

Example:

> (crypto-random-bytes 14)
#"\0\1\1\2\3\5\b\r\25\"7Y\220\351"

Added in version 6.3 of package base.

Returns a random element of the sequence. Like sequence-length, does not terminate on infinite sequences, and evaluates the entire sequence.

Added in version 6.4 of package base.

Returns a list of n elements of seq, picked at random, listed in any order. If replacement? is non-false, elements are drawn with replacement, which allows for duplicates.

Like sequence-length, does not terminate on infinite sequences, and evaluates the entire sequence.

Added in version 6.4 of package base.

4.3.2.9 Number–String Conversions🔗ℹ

Returns a string that is the printed form of z (see Printing Numbers) in the base specified by radix. If z is inexact,radix must be 10, otherwise theexn:fail:contract exception is raised.

Examples:

> (number->string 3.0)
"3.0"
> (number->string 255 8)
"377"
(string->number s [radix convert-mode decimal-mode single-mode])
→ (or/c number? #f string? extflonum?)
s : string?
radix : (integer-in 2 16) = 10
convert-mode : (or/c 'number-or-false 'read) = 'number-or-false
decimal-mode : (or/c 'decimal-as-inexact 'decimal-as-exact) =
single-mode : (or/c 'single 'double) =

Reads and returns a number datum from s (seeReading Numbers). The optional radix argument specifies the default base for the number, which can be overridden by#b, #o, #d, or #x in the string.

If convert-mode is 'number-or-false, the result is#f if s does not parse exactly as a number datum (with no whitespace). If convert-mode is 'read, the result can be an extflonum, and it can be a string that contains an error message if read of s would report a reader exception (but the result can still be #f ifread would report a symbol).

The decimal-mode argument controls number parsing the same way that the read-decimal-as-inexact parameter affectsread.

The single-mode argument controls number parsing the same way that the read-single-flonum parameter affects read.

Examples:

> (string->number "3.0+2.5i")
3.0+2.5i
> (string->number "hello")
#f
> (string->number "111" 7)
57
> (string->number "#b111" 7)
7
> (string->number "#e+inf.0" 10 'read)
"no exact representation for +inf.0"
> (string->number "10.3" 10 'read 'decimal-as-exact)
103/10

Changed in version 6.8.0.2 of package base: Added the convert-mode anddecimal-mode arguments.
Changed in version 7.3.0.5: Added the single-mode argument.

Prints n into a string and returns the string. The printed form of n shows exactly decimal-digits digits after the decimal point. The printed form uses a minus sign if n is negative, and it does not use a plus sign if n is positive.

Before printing, n is converted to an exact number, multiplied by (expt 10 decimal-digits), rounded, and then divided again by (expt 10 decimal-digits). The result of this process is an exact number whose decimal representation has no more than decimal-digits digits after the decimal (and it is padded with trailing zeros if necessary).

If n is a real number with no decimal representation (e.g.+nan.0, +inf.0), then the exn:fail:contract exception is raised. (Any real number that is convertible to decimal notation is rational, so n must be rational?, despite the name of the function.)

Examples:

> (real->decimal-string pi)
"3.14"
> (real->decimal-string pi 5)
"3.14159"

Converts the machine-format number encoded in bstr to an exact integer. The start and end arguments specify the substring to decode, where (- end start) must be 1,2, 4, or 8. If signed? is true, then the bytes are decoded as a two’s-complement number, otherwise it is decoded as an unsigned integer. If big-endian? is true, then the first byte’s value provides the most significant eight bits of the number, otherwise the first byte provides the least-significant eight bits, and so on.

Changed in version 6.10.0.1 of package base: Added support for decoding a 1-byte string.

Converts the exact integer n to a machine-format number encoded in a byte string of length size-n, which must be 1,2, 4, or 8. If signed? is true, then the number is encoded as two’s complement, otherwise it is encoded as an unsigned bit stream. If big-endian? is true, then the most significant eight bits of the number are encoded in the first byte of the resulting byte string, otherwise the least-significant bits are encoded in the first byte, and so on.

The dest-bstr argument must be a mutable byte string of length size-n. The encoding of n is written intodest-bstr starting at offset start, anddest-bstr is returned as the result.

If n cannot be encoded in a byte string of the requested size and format, the exn:fail:contract exception is raised. If dest-bstr is not of length size-n, the exn:fail:contract exception is raised.

Changed in version 6.10.0.1 of package base: Added support for encoding a 1-byte value.

Converts the IEEE floating-point number encoded in bstr from position start (inclusive) to end (exclusive) to an inexact real number. The difference between start anend must be either 4 or 8 bytes. If big-endian? is true, then the first byte’s ASCII value provides the most significant eight bits of the IEEE representation, otherwise the first byte provides the least-significant eight bits, and so on.

Converts the real number x to its IEEE representation in a byte string of length size-n, which must be 4 or8. If big-endian? is true, then the most significant eight bits of the number are encoded in the first byte of the resulting byte string, otherwise the least-significant bits are encoded in the first character, and so on.

The dest-bstr argument must be a mutable byte string of length size-n. The encoding of n is written intodest-bstr starting with byte start, anddest-bstr is returned as the result.

If dest-bstr is provided and it has less than startplus size-n bytes, the exn:fail:contract exception is raised.

Returns #t if the native encoding of numbers is big-endian for the machine running Racket, #f if the native encoding is little-endian.

4.3.2.10 Extra Constants and Functions🔗ℹ

The bindings documented in this section are provided by the racket/math and racket libraries, but not racket/base.

An approximation of π, the ratio of a circle’s circumference to its diameter.

Examples:

> pi
3.141592653589793
> (cos pi)
-1.0

The same value as pi, but as a single-precision floating-point number if the current platform supports it.

Changed in version 7.3.0.5 of package base: Allow value to be a double-precision flonum.

Converts an x-degree angle to radians.

Examples:

> (degrees->radians 180)
3.141592653589793
> (sin (degrees->radians 45))
0.7071067811865475

Converts x radians to degrees.

Examples:

> (radians->degrees pi)
180.0
> (radians->degrees (* 1/4 pi))
45.0

Returns (* z z).

Returns the sign of x as either -1, 0 (or a signed-zero variant, when inexact), 1, or not-a-number.

Examples:

> (sgn 10)
1
> (sgn -10.0)
-1.0
> (sgn 0)
0
> (sgn -0.0)
-0.0
> (sgn 0.0)
0.0
> (sgn +nan.0)
+nan.0
> (sgn +inf.0)
1.0
> (sgn -inf.0)
-1.0

Returns the complex conjugate of z.

Examples:

> (conjugate 1)
1
> (conjugate 3+4i)
3-4i

Returns the hyperbolic sine of z.

Returns the hyperbolic cosine of z.

Returns the hyperbolic tangent of z.

Computes the greatest exact integer m such that:

Hence also:

Examples:

> (order-of-magnitude 999)
2
> (order-of-magnitude 1000)
3
> (order-of-magnitude 1/100)
-2
> (order-of-magnitude 1/101)
-3

Returns #t if x is eqv? to +nan.0 or +nan.f; otherwise #f.

Returns #t if x is +inf.0, -inf.0, +inf.f, -inf.f; otherwise #f.

Added in version 6.8.0.2 of package base.

Added in version 6.8.0.2 of package base.

Added in version 6.8.0.2 of package base.

Added in version 6.8.0.2 of package base.

Added in version 6.8.0.2 of package base.