Stable Audio (original) (raw)

Stable Audio was proposed in Stable Audio Open by Zach Evans et al. . it takes a text prompt as input and predicts the corresponding sound or music sample.

Stable Audio Open generates variable-length (up to 47s) stereo audio at 44.1kHz from text prompts. It comprises three components: an autoencoder that compresses waveforms into a manageable sequence length, a T5-based text embedding for text conditioning, and a transformer-based diffusion (DiT) model that operates in the latent space of the autoencoder.

Stable Audio is trained on a corpus of around 48k audio recordings, where around 47k are from Freesound and the rest are from the Free Music Archive (FMA). All audio files are licensed under CC0, CC BY, or CC Sampling+. This data is used to train the autoencoder and the DiT.

The abstract of the paper is the following:Open generative models are vitally important for the community, allowing for fine-tunes and serving as baselines when presenting new models. However, most current text-to-audio models are private and not accessible for artists and researchers to build upon. Here we describe the architecture and training process of a new open-weights text-to-audio model trained with Creative Commons data. Our evaluation shows that the model’s performance is competitive with the state-of-the-art across various metrics. Notably, the reported FDopenl3 results (measuring the realism of the generations) showcase its potential for high-quality stereo sound synthesis at 44.1kHz.

This pipeline was contributed by Yoach Lacombe. The original codebase can be found at Stability-AI/stable-audio-tools.

Tips

When constructing a prompt, keep in mind:

• Descriptive prompt inputs work best; use adjectives to describe the sound (for example, “high quality” or “clear”) and make the prompt context specific where possible (e.g. “melodic techno with a fast beat and synths” works better than “techno”).
• Using a negative prompt can significantly improve the quality of the generated audio. Try using a negative prompt of “low quality, average quality”.

During inference:

• The quality of the generated audio sample can be controlled by the num_inference_steps argument; higher steps give higher quality audio at the expense of slower inference.
• Multiple waveforms can be generated in one go: set num_waveforms_per_prompt to a value greater than 1 to enable. Automatic scoring will be performed between the generated waveforms and prompt text, and the audios ranked from best to worst accordingly.

StableAudioPipeline

class diffusers.StableAudioPipeline

< source >

( vae: AutoencoderOobleck text_encoder: T5EncoderModel projection_model: StableAudioProjectionModel tokenizer: Union transformer: StableAudioDiTModel scheduler: EDMDPMSolverMultistepScheduler )

Parameters

• vae (AutoencoderOobleck) — Variational Auto-Encoder (VAE) model to encode and decode images to and from latent representations.
• text_encoder (T5EncoderModel) — Frozen text-encoder. StableAudio uses the encoder ofT5, specifically thegoogle-t5/t5-base variant.
• projection_model (StableAudioProjectionModel) — A trained model used to linearly project the hidden-states from the text encoder model and the start and end seconds. The projected hidden-states from the encoder and the conditional seconds are concatenated to give the input to the transformer model.
• tokenizer (T5Tokenizer) — Tokenizer to tokenize text for the frozen text-encoder.
• transformer (StableAudioDiTModel) — A StableAudioDiTModel to denoise the encoded audio latents.
• scheduler (EDMDPMSolverMultistepScheduler) — A scheduler to be used in combination with transformer to denoise the encoded audio latents.

Pipeline for text-to-audio generation using StableAudio.

This model inherits from DiffusionPipeline. Check the superclass documentation for the generic methods implemented for all pipelines (downloading, saving, running on a particular device, etc.).

__call__

< source >

( prompt: Union = None audio_end_in_s: Optional = None audio_start_in_s: Optional = 0.0 num_inference_steps: int = 100 guidance_scale: float = 7.0 negative_prompt: Union = None num_waveforms_per_prompt: Optional = 1 eta: float = 0.0 generator: Union = None latents: Optional = None initial_audio_waveforms: Optional = None initial_audio_sampling_rate: Optional = None prompt_embeds: Optional = None negative_prompt_embeds: Optional = None attention_mask: Optional = None negative_attention_mask: Optional = None return_dict: bool = True callback: Optional = None callback_steps: Optional = 1 output_type: Optional = 'pt' ) → StableDiffusionPipelineOutput or tuple

Parameters

• prompt (str or List[str], optional) — The prompt or prompts to guide audio generation. If not defined, you need to pass prompt_embeds.
• audio_end_in_s (float, optional, defaults to 47.55) — Audio end index in seconds.
• audio_start_in_s (float, optional, defaults to 0) — Audio start index in seconds.
• num_inference_steps (int, optional, defaults to 100) — The number of denoising steps. More denoising steps usually lead to a higher quality audio at the expense of slower inference.
• guidance_scale (float, optional, defaults to 7.0) — A higher guidance scale value encourages the model to generate audio that is closely linked to the textprompt at the expense of lower sound quality. Guidance scale is enabled when guidance_scale > 1.
• negative_prompt (str or List[str], optional) — The prompt or prompts to guide what to not include in audio generation. If not defined, you need to pass negative_prompt_embeds instead. Ignored when not using guidance (guidance_scale < 1).
• num_waveforms_per_prompt (int, optional, defaults to 1) — The number of waveforms to generate per prompt.
• eta (float, optional, defaults to 0.0) — Corresponds to parameter eta (η) from the DDIM paper. Only applies to the DDIMScheduler, and is ignored in other schedulers.
• generator (torch.Generator or List[torch.Generator], optional) — A torch.Generator to make generation deterministic.
• latents (torch.Tensor, optional) — Pre-generated noisy latents sampled from a Gaussian distribution, to be used as inputs for audio generation. Can be used to tweak the same generation with different prompts. If not provided, a latents tensor is generated by sampling using the supplied random generator.
• initial_audio_waveforms (torch.Tensor, optional) — Optional initial audio waveforms to use as the initial audio waveform for generation. Must be of shape(batch_size, num_channels, audio_length) or (batch_size, audio_length), where batch_sizecorresponds to the number of prompts passed to the model.
• initial_audio_sampling_rate (int, optional) — Sampling rate of the initial_audio_waveforms, if they are provided. Must be the same as the model.
• prompt_embeds (torch.Tensor, optional) — Pre-computed text embeddings from the text encoder model. Can be used to easily tweak text inputs,e.g. prompt weighting. If not provided, text embeddings will be computed from prompt input argument.
• negative_prompt_embeds (torch.Tensor, optional) — Pre-computed negative text embeddings from the text encoder model. Can be used to easily tweak text inputs, e.g. prompt weighting. If not provided, negative_prompt_embeds will be computed fromnegative_prompt input argument.
• attention_mask (torch.LongTensor, optional) — Pre-computed attention mask to be applied to the prompt_embeds. If not provided, attention mask will be computed from prompt input argument.
• negative_attention_mask (torch.LongTensor, optional) — Pre-computed attention mask to be applied to the negative_text_audio_duration_embeds.
• return_dict (bool, optional, defaults to True) — Whether or not to return a StableDiffusionPipelineOutput instead of a plain tuple.
• callback (Callable, optional) — A function that calls every callback_steps steps during inference. The function is called with the following arguments: callback(step: int, timestep: int, latents: torch.Tensor).
• callback_steps (int, optional, defaults to 1) — The frequency at which the callback function is called. If not specified, the callback is called at every step.
• output_type (str, optional, defaults to "pt") — The output format of the generated audio. Choose between "np" to return a NumPy np.ndarray or"pt" to return a PyTorch torch.Tensor object. Set to "latent" to return the latent diffusion model (LDM) output.

If return_dict is True, StableDiffusionPipelineOutput is returned, otherwise a tuple is returned where the first element is a list with the generated audio.

The call function to the pipeline for generation.

Examples:

import scipy import torch import soundfile as sf from diffusers import StableAudioPipeline

repo_id = "stabilityai/stable-audio-open-1.0" pipe = StableAudioPipeline.from_pretrained(repo_id, torch_dtype=torch.float16) pipe = pipe.to("cuda")

prompt = "The sound of a hammer hitting a wooden surface." negative_prompt = "Low quality."

generator = torch.Generator("cuda").manual_seed(0)

audio = pipe( ... prompt, ... negative_prompt=negative_prompt, ... num_inference_steps=200, ... audio_end_in_s=10.0, ... num_waveforms_per_prompt=3, ... generator=generator, ... ).audios

output = audio[0].T.float().cpu().numpy() sf.write("hammer.wav", output, pipe.vae.sampling_rate)

Disable sliced VAE decoding. If enable_vae_slicing was previously enabled, this method will go back to computing decoding in one step.

Enable sliced VAE decoding. When this option is enabled, the VAE will split the input tensor in slices to compute decoding in several steps. This is useful to save some memory and allow larger batch sizes.

< > Update on GitHub