Long Short-Term Memory Neural Networks - MATLAB & Simulink (original) (raw)

This topic explains how to work with sequence and time series data for classification and regression tasks using long short-term memory (LSTM) neural networks. For an example showing how to classify sequence data using an LSTM neural network, see Sequence Classification Using Deep Learning.

An LSTM neural network is a type of recurrent neural network (RNN) that can learn long-term dependencies between time steps of sequence data.

LSTM Neural Network Architecture

The core components of an LSTM neural network are a sequence input layer and an LSTM layer. A sequence input layer inputs sequence or time series data into the neural network. An LSTM layer learns long-term dependencies between time steps of sequence data.

This diagram illustrates the architecture of a simple LSTM neural network for classification. The neural network starts with a sequence input layer followed by an LSTM layer. To predict class labels, the neural network ends with a fully connected layer, and a softmax layer.

Diagram illustrating the architecture of a simple LSTM neural network for classification.

This diagram illustrates the architecture of a simple LSTM neural network for regression. The neural network starts with a sequence input layer followed by an LSTM layer. The neural network ends with a fully connected layer.

Diagram illustrating the architecture of a simple LSTM neural network for regression.

Classification LSTM Networks

To create an LSTM network for sequence-to-label classification, create a layer array containing a sequence input layer, an LSTM layer, a fully connected layer, and a softmax layer.

Set the size of the sequence input layer to the number of features of the input data. Set the size of the fully connected layer to the number of classes. You do not need to specify the sequence length.

For the LSTM layer, specify the number of hidden units and the output mode "last".

numFeatures = 12; numHiddenUnits = 100; numClasses = 9; layers = [ ... sequenceInputLayer(numFeatures) lstmLayer(numHiddenUnits,OutputMode="last") fullyConnectedLayer(numClasses) softmaxLayer];

For an example showing how to train an LSTM network for sequence-to-label classification and classify new data, see Sequence Classification Using Deep Learning.

To create an LSTM network for sequence-to-sequence classification, use the same architecture as for sequence-to-label classification, but set the output mode of the LSTM layer to "sequence".

numFeatures = 12; numHiddenUnits = 100; numClasses = 9; layers = [ ... sequenceInputLayer(numFeatures) lstmLayer(numHiddenUnits,OutputMode="sequence") fullyConnectedLayer(numClasses) softmaxLayer];

Regression LSTM Networks

To create an LSTM network for sequence-to-one regression, create a layer array containing a sequence input layer, an LSTM layer, and a fully connected layer.

Set the size of the sequence input layer to the number of features of the input data. Set the size of the fully connected layer to the number of responses. You do not need to specify the sequence length.

For the LSTM layer, specify the number of hidden units and the output mode "last".

numFeatures = 12; numHiddenUnits = 125; numResponses = 1;

layers = [ ... sequenceInputLayer(numFeatures) lstmLayer(numHiddenUnits,OutputMode="last") fullyConnectedLayer(numResponses)];

To create an LSTM network for sequence-to-sequence regression, use the same architecture as for sequence-to-one regression, but set the output mode of the LSTM layer to "sequence".

numFeatures = 12; numHiddenUnits = 125; numResponses = 1;

layers = [ ... sequenceInputLayer(numFeatures) lstmLayer(numHiddenUnits,OutputMode="sequence") fullyConnectedLayer(numResponses)];

For an example showing how to train an LSTM network for sequence-to-sequence regression and predict on new data, see Sequence-to-Sequence Regression Using Deep Learning.

Video Classification Network

To create a deep learning network for data containing sequences of images such as video data and medical images, specify image sequence input using the sequence input layer.

Specify the layers and create a dlnetwork object.

inputSize = [64 64 3]; filterSize = 5; numFilters = 20; numHiddenUnits = 200; numClasses = 10;

layers = [ sequenceInputLayer(inputSize) convolution2dLayer(filterSize,numFilters) batchNormalizationLayer reluLayer lstmLayer(numHiddenUnits,OutputMode="last") fullyConnectedLayer(numClasses) softmaxLayer];

net = dlnetwork(layers);

For an example showing how to train a deep learning network for video classification, see Classify Videos Using Deep Learning.

Deeper LSTM Networks

You can make LSTM networks deeper by inserting extra LSTM layers with the output mode "sequence" before the LSTM layer. To prevent overfitting, you can insert dropout layers after the LSTM layers.

For sequence-to-label classification networks, the output mode of the last LSTM layer must be "last".

numFeatures = 12; numHiddenUnits1 = 125; numHiddenUnits2 = 100; numClasses = 9; layers = [ ... sequenceInputLayer(numFeatures) lstmLayer(numHiddenUnits1,OutputMode="sequence") dropoutLayer(0.2) lstmLayer(numHiddenUnits2,OutputMode="last") dropoutLayer(0.2) fullyConnectedLayer(numClasses) softmaxLayer];

For sequence-to-sequence classification networks, the output mode of the last LSTM layer must be "sequence".

numFeatures = 12; numHiddenUnits1 = 125; numHiddenUnits2 = 100; numClasses = 9; layers = [ ... sequenceInputLayer(numFeatures) lstmLayer(numHiddenUnits1,OutputMode="sequence") dropoutLayer(0.2) lstmLayer(numHiddenUnits2,OutputMode="sequence") dropoutLayer(0.2) fullyConnectedLayer(numClasses) softmaxLayer];

Layers

Layer Description
sequenceInputLayer A sequence input layer inputs sequence data to a neural network and applies data normalization.
lstmLayer An LSTM layer is an RNN layer that learns long-term dependencies between time steps in time-series and sequence data.
bilstmLayer A bidirectional LSTM (BiLSTM) layer is an RNN layer that learns bidirectional long-term dependencies between time steps of time-series or sequence data. These dependencies can be useful when you want the RNN to learn from the complete time series at each time step.
gruLayer A GRU layer is an RNN layer that learns dependencies between time steps in time-series and sequence data.
convolution1dLayer A 1-D convolutional layer applies sliding convolutional filters to 1-D input.
maxPooling1dLayer A 1-D max pooling layer performs downsampling by dividing the input into 1-D pooling regions, then computing the maximum of each region.
averagePooling1dLayer A 1-D average pooling layer performs downsampling by dividing the input into 1-D pooling regions, then computing the average of each region.
globalMaxPooling1dLayer A 1-D global max pooling layer performs downsampling by outputting the maximum of the time or spatial dimensions of the input.
flattenLayer A flatten layer collapses the spatial dimensions of the input into the channel dimension.
wordEmbeddingLayer (Text Analytics Toolbox) A word embedding layer maps word indices to vectors.

Classification, Prediction, and Forecasting

To make predictions on new data, use the minibatchpredict function. To convert predicted classification scores to labels, use the scores2label.

LSTM neural networks can remember the state of the neural network between predictions. The RNN state is useful when you do not have the complete time series in advance, or if you want to make multiple predictions on a long time series.

To predict and classify on parts of a time series and update the RNN state, use thepredict function and also return and update the neural network state. To reset the RNN state between predictions, use resetState.

For an example showing how to forecast future time steps of a sequence, see Time Series Forecasting Using Deep Learning.

Sequence Padding and Truncation

LSTM neural networks support input data with varying sequence lengths. When passing data through the neural network, the software pads or truncates sequences so that all the sequences in each mini-batch have the specified length. You can specify the sequence lengths and the value used to pad the sequences using the SequenceLength and SequencePaddingValue training options.

After training the neural network, you can use the same mini-batch size and padding options when you use the minibatchpredict function.

Sort Sequences by Length

To reduce the amount of padding or discarded data when padding or truncating sequences, try sorting your data by sequence length. For sequences where the first dimension corresponds to the time steps, to sort the data by sequence length, first get the number of columns of each sequence by applying size(X,1) to every sequence using cellfun. Then sort the sequence lengths using sort, and use the second output to reorder the original sequences.

sequenceLengths = cellfun(@(X) size(X,1), XTrain); [sequenceLengthsSorted,idx] = sort(sequenceLengths); XTrain = XTrain(idx);

Two plots bar charts representing sequence data. The x axis is labeled "Length" and the y axis is labeled "Sequence". The chart on the left has title "Unsorted Data" and shows the original sequence lengths. The chart on the right has title "Sorted Data" and shows that the sequences are sorted by length in ascending order.

Pad Sequences

If the SequenceLength training or prediction option is"longest", then the software pads the sequences so that all the sequences in a mini-batch have the same length as the longest sequence in the mini-batch. This option is the default.

Two plots bar charts representing sequence data. The x axis is labeled "Length" and the y axis is labeled "Sequence". The chart on the left has title "Unsorted Data" and shows the original sequence lengths. The chart on the right has title "Sorted Data" and shows that the sequences are sorted by length in ascending order. Both charts indicate sequences divided into mini-batches using a red line and has a yellow region indicating right-padding. The chart on the right has smaller padding regions.

Truncate Sequences

If the SequenceLength training or prediction option is"shortest", then the software truncates the sequences so that all the sequences in a mini-batch have the same length as the shortest sequence in that mini-batch. The remaining data in the sequences is discarded.

Two plots bar charts representing sequence data. The x axis is labeled "Length" and the y axis is labeled "Sequence". The chart on the left has title "Unsorted Data" and shows the original sequence lengths. The chart on the right has title "Sorted Data" and shows that the sequences are sorted by length in ascending order. Both charts indicate sequences divided into mini-batches using a red line and has a gray patches indicating discarded data on the right-side of the sequences. The chart on the right has less discarded data.

Specify Padding Direction

The location of the padding and truncation can impact training, classification, and prediction accuracy. Try setting the SequencePaddingDirection training options to"left" or "right" and see which is best for your data.

Recurrent layers process sequence data one time step at a time, so when the recurrent layerOutputMode property is "last", any padding in the final time steps can negatively influence the layer output. To pad or truncate sequence data on the left, set the SequencePaddingDirection name-value argument to"left".

For sequence-to-sequence neural networks (when the OutputMode property is"sequence" for each recurrent layer), any padding in the first time steps can negatively influence the predictions for the earlier time steps. To pad or truncate sequence data on the right, set the SequencePaddingDirection name-value argument to "right".

Two plots bar charts representing sequence data sorted by length. The x axis is labeled "Length" and the y axis is labeled "Sequence". The chart on the left has title "Left-Padding" and shows yellow padding regions on the left of the sequences. The chart on the right has title "Right-Padding" and shows yellow padding regions on the right of the sequences. Both charts indicate sequences divided into mini-batches using a red line.

Two plots bar charts representing sequence data sorted by length. The x axis is labeled "Length" and the y axis is labeled "Sequence". The chart on the left has title "Left-Truncation" and shows gray truncation regions on the left of the sequences. The chart on the right has title "Right-Truncation" and shows gray truncation regions on the right of the sequences. Both charts indicate sequences divided into mini-batches using a red line.

Normalize Sequence Data

To recenter training data automatically at training time using zero-center normalization, set the Normalization option of sequenceInputLayer to"zerocenter". Alternatively, you can normalize sequence data by first calculating the per-feature mean and standard deviation of all the sequences. Then, for each training observation, subtract the mean value and divide by the standard deviation.

mu = mean([XTrain{:}],1); sigma = std([XTrain{:}],0,1); XTrain = cellfun(@(X) (X-mu)./sigma,XTrain,UniformOutput=false);

Out-of-Memory Data

Use datastores for sequence, time series, and signal data when data is too large to fit in memory or to perform specific operations when reading batches of data.

To learn more, see Train Network Using Out-of-Memory Sequence Data and Classify Out-of-Memory Text Data Using Deep Learning.

Visualization

Investigate and visualize the features learned by LSTM neural networks from sequence and time series data by extracting the activations using the minibatchpredict function and setting the Outputs argument. To learn more, see Visualize Activations of LSTM Network.

LSTM Layer Architecture

This diagram illustrates the flow of data through an LSTM layer with input x and output y with T time steps. In the diagram, ht denotes the output (also known as the hidden state) and ct denotes the cell state at time step_t_.

If the layer outputs the full sequence, then it outputs y1, …, yT, which is equivalent to h1, …, hT. If the layer outputs the last time step only, then the layer outputs yT, which is equivalent to hT. The number of channels in the output matches the number of hidden units of the LSTM layer.

Diagram showing flow of data through an LSTM layer. The input time steps are labeled x_1 through x_T. The outputs are labeled y_1 through y_T. The layer consists of multiple LSTM operations. Each LSTM operation receives the hidden state and cell state from the previous operation and passes an updated hidden and cell state to the next operation. The hidden states are labeled h_0 through h_T, where h_0 is the initial state. The cell states are labeled c_0 through c_T, where c_0 is the initial state. The outputs y_t are equivalent to the hidden states h_t.

The first LSTM operation uses the initial state of the RNN and the first time step of the sequence to compute the first output and the updated cell state. At time step_t_, the operation uses the current state of the RNN (ct−1,ht−1) and the next time step of the sequence to compute the output and the updated cell state ct.

The state of the layer consists of the hidden state (also known as the_output state_) and the cell state. The hidden state at time step t contains the output of the LSTM layer for this time step. The cell state contains information learned from the previous time steps. At each time step, the layer adds information to or removes information from the cell state. The layer controls these updates using gates.

These components control the cell state and hidden state of the layer.

Component Purpose
Input gate (i) Control level of cell state update
Forget gate (f) Control level of cell state reset (forget)
Cell candidate (g) Add information to cell state
Output gate (o) Control level of cell state added to hidden state

This diagram illustrates the flow of data at time step t. This diagram shows how the gates forget, update, and output the cell and hidden states.

Flow diagram of cell and hidden states

The learnable weights of an LSTM layer are the input weights W (InputWeights), the recurrent weights R (RecurrentWeights), and the bias b (Bias). The matrices W, R, and b are concatenations of the input weights, the recurrent weights, and the bias of each component, respectively. The layer concatenates the matrices according to these equations:

where i, f, g, and_o_ denote the input gate, forget gate, cell candidate, and output gate, respectively.

The cell state at time step t is given by

where ⊙ denotes the Hadamard product (element-wise multiplication of vectors).

The hidden state at time step t is given by

where σc denotes the state activation function. By default, thelstmLayer function uses the hyperbolic tangent function (tanh) to compute the state activation function.

These formulas describe the components at time step t.

Component Formula
Input gate it=σg(Wixt+​Riht−1+bi)
Forget gate ft=σg(Wfxt+​Rfht−1+bf)
Cell candidate gt=σc(Wgxt+​Rght−1+bg)
Output gate ot=σg(Woxt+​Roht−1+bo)

In these calculations, σg denotes the gate activation function. By default, thelstmLayer function, uses the sigmoid function, given by σ(x)=(1+e−x)−1, to compute the gate activation function.

References

[1] Hochreiter, S., and J. Schmidhuber. "Long short-term memory." Neural computation. Vol. 9, Number 8, 1997, pp.1735–1780.

See Also

sequenceInputLayer | lstmLayer | bilstmLayer | gruLayer | dlnetwork | minibatchpredict | predict | scores2label | flattenLayer | wordEmbeddingLayer (Text Analytics Toolbox)

Topics