Output FIFO size - Specify the register size of the generated output FIFOs around the streaming matrix partitions - MATLAB (original) (raw)

Main Content

Specify the register size of the generated output FIFOs around the streaming matrix partitions

Since R2022b

Model Configuration Pane: Optimization / Frame to Sample Conversion

Description

Use this parameter to specify the register size of the generated output FIFOs around the streaming matrix partitions. The frame-to-sample conversion generates an output FIFO for every output port in the DUT that is connected to a streaming matrix output signal. The Output FIFO size parameter must be greater than equal to four, the minimum size of the HDL FIFO block.

Dependencies

To enable this parameter, select Enable frame to sample conversion.

Settings

10 (default)

The frame-to-sample conversion generates an output FIFO for every output port in the DUT that is connected to a streaming matrix output signal.

Tips

To set this property, use the functions hdlset_param or makehdl. To view the property value, use the function hdlget_param.

For example, you can use the OutputFIFOSize setting when you generate HDL code for a DUT subsystem in a model using either of these methods:

• Pass the property as an argument to the makehdl function.
  makehdl('<model_name/DUT_name>', ...
  'OutputFIFOSize',20)
• When you use hdlset_param, set the parameter on the model and then generate HDL code by using the makehdl function.
  hdlset_param('','OutputFIFOSize',20)
  makehdl('<model_name/DUT_name>')

Recommended Settings

No recommendations.

Programmatic Use

Version History

Introduced in R2022b