DistributedDataParallel — PyTorch 2.7 documentation (original) (raw)

class torch.nn.parallel.DistributedDataParallel(module, device_ids=None, output_device=None, dim=0, broadcast_buffers=True, init_sync=True, process_group=None, bucket_cap_mb=None, find_unused_parameters=False, check_reduction=False, gradient_as_bucket_view=False, static_graph=False, delay_all_reduce_named_params=None, param_to_hook_all_reduce=None, mixed_precision=None, device_mesh=None)[source][source]¶

Implement distributed data parallelism based on torch.distributed at module level.

This container provides data parallelism by synchronizing gradients across each model replica. The devices to synchronize across are specified by the input process_group, which is the entire world by default. Note that DistributedDataParallel does not chunk or otherwise shard the input across participating GPUs; the user is responsible for defining how to do so, for example through the use of a DistributedSampler.

See also: Basics and Use nn.parallel.DistributedDataParallel instead of multiprocessing or nn.DataParallel. The same constraints on input as in torch.nn.DataParallel apply.

Creation of this class requires that torch.distributed to be already initialized, by calling torch.distributed.init_process_group().

DistributedDataParallel is proven to be significantly faster thantorch.nn.DataParallel for single-node multi-GPU data parallel training.

To use DistributedDataParallel on a host with N GPUs, you should spawn up N processes, ensuring that each process exclusively works on a single GPU from 0 to N-1. This can be done by either settingCUDA_VISIBLE_DEVICES for every process or by calling:

torch.cuda.set_device(i)

where i is from 0 to N-1. In each process, you should refer the following to construct this module:

torch.distributed.init_process_group( backend='nccl', world_size=N, init_method='...' ) model = DistributedDataParallel(model, device_ids=[i], output_device=i)

In order to spawn up multiple processes per node, you can use eithertorch.distributed.launch or torch.multiprocessing.spawn.

Note

nccl backend is currently the fastest and highly recommended backend when using GPUs. This applies to both single-node and multi-node distributed training.

Note

This module also supports mixed-precision distributed training. This means that your model can have different types of parameters such as mixed types of fp16 and fp32, the gradient reduction on these mixed types of parameters will just work fine.

Note

If you use torch.save on one process to checkpoint the module, and torch.load on some other processes to recover it, make sure thatmap_location is configured properly for every process. Withoutmap_location, torch.load would recover the module to devices where the module was saved from.

Note

When a model is trained on M nodes with batch=N, the gradient will be M times smaller when compared to the same model trained on a single node with batch=M*N if the loss is summed (NOT averaged as usual) across instances in a batch (because the gradients between different nodes are averaged). You should take this into consideration when you want to obtain a mathematically equivalent training process compared to the local training counterpart. But in most cases, you can just treat a DistributedDataParallel wrapped model, a DataParallel wrapped model and an ordinary model on a single GPU as the same (E.g. using the same learning rate for equivalent batch size).

Note

Parameters are never broadcast between processes. The module performs an all-reduce step on gradients and assumes that they will be modified by the optimizer in all processes in the same way. Buffers (e.g. BatchNorm stats) are broadcast from the module in process of rank 0, to all other replicas in the system in every iteration.

Note

If you are using DistributedDataParallel in conjunction with theDistributed RPC Framework, you should always usetorch.distributed.autograd.backward() to compute gradients andtorch.distributed.optim.DistributedOptimizer for optimizing parameters.

Example:

import torch.distributed.autograd as dist_autograd from torch.nn.parallel import DistributedDataParallel as DDP import torch from torch import optim from torch.distributed.optim import DistributedOptimizer import torch.distributed.rpc as rpc from torch.distributed.rpc import RRef

t1 = torch.rand((3, 3), requires_grad=True) t2 = torch.rand((3, 3), requires_grad=True) rref = rpc.remote("worker1", torch.add, args=(t1, t2)) ddp_model = DDP(my_model)

Setup optimizer

optimizer_params = [rref] for param in ddp_model.parameters(): optimizer_params.append(RRef(param))

dist_optim = DistributedOptimizer( optim.SGD, optimizer_params, lr=0.05, )

with dist_autograd.context() as context_id: pred = ddp_model(rref.to_here()) loss = loss_func(pred, target) dist_autograd.backward(context_id, [loss]) dist_optim.step(context_id)

Note

DistributedDataParallel currently offers limited support for gradient checkpointing with torch.utils.checkpoint(). If the checkpoint is done with use_reentrant=False (recommended), DDP will work as expected without any limitations. If, however, the checkpoint is done with use_reentrant=True (the default), DDP will work as expected when there are no unused parameters in the model and each layer is checkpointed at most once (make sure you are not passingfind_unused_parameters=True to DDP). We currently do not support the case where a layer is checkpointed multiple times, or when there unused parameters in the checkpointed model.

Note

To let a non-DDP model load a state dict from a DDP model,consume_prefix_in_state_dict_if_present()needs to be applied to strip the prefix “module.” in the DDP state dict before loading.

Warning

Constructor, forward method, and differentiation of the output (or a function of the output of this module) are distributed synchronization points. Take that into account in case different processes might be executing different code.

Warning

This module assumes all parameters are registered in the model by the time it is created. No parameters should be added nor removed later. Same applies to buffers.

Warning

This module assumes all parameters are registered in the model of each distributed processes are in the same order. The module itself will conduct gradient allreduce following the reverse order of the registered parameters of the model. In other words, it is users’ responsibility to ensure that each distributed process has the exact same model and thus the exact same parameter registration order.

Warning

This module allows parameters with non-rowmajor-contiguous strides. For example, your model may contain some parameters whosetorch.memory_format is torch.contiguous_formatand others whose format is torch.channels_last. However, corresponding parameters in different processes must have the same strides.

Warning

This module doesn’t work with torch.autograd.grad() (i.e. it will only work if gradients are to be accumulated in .grad attributes of parameters).

Warning

If you plan on using this module with a nccl backend or a gloobackend (that uses Infiniband), together with a DataLoader that uses multiple workers, please change the multiprocessing start method toforkserver (Python 3 only) or spawn. Unfortunately Gloo (that uses Infiniband) and NCCL2 are not fork safe, and you will likely experience deadlocks if you don’t change this setting.

Warning

You should never try to change your model’s parameters after wrapping up your model with DistributedDataParallel. Because, when wrapping up your model with DistributedDataParallel, the constructor of DistributedDataParallel will register the additional gradient reduction functions on all the parameters of the model itself at the time of construction. If you change the model’s parameters afterwards, gradient reduction functions no longer match the correct set of parameters.

Warning

Using DistributedDataParallel in conjunction with theDistributed RPC Framework is experimental and subject to change.

Parameters

• module (Module) – module to be parallelized
• device_ids (list of int or torch.device) –
  CUDA devices. 1) For single-device modules, device_ids can contain exactly one device id, which represents the only CUDA device where the input module corresponding to this process resides. Alternatively, device_ids can also be None. 2) For multi-device modules and CPU modules,device_ids must be None.
  When device_ids is None for both cases, both the input data for the forward pass and the actual module must be placed on the correct device. (default: None)
• output_device (int or torch.device) – Device location of output for single-device CUDA modules. For multi-device modules and CPU modules, it must be None, and the module itself dictates the output location. (default: device_ids[0]for single-device modules)
• broadcast_buffers (bool) – Flag that enables syncing (broadcasting) buffers of the module at beginning of the forwardfunction. (default: True)
• init_sync (bool) – Whether to sync during initialization to verify param shapes and broadcast parameters and buffers. WARNING: if this is set to False the user is required to ensure themselves that the weights are the same on all ranks. (default: True)
• process_group – The process group to be used for distributed data all-reduction. If None, the default process group, which is created by torch.distributed.init_process_group(), will be used. (default: None)
• bucket_cap_mb – DistributedDataParallel will bucket parameters into multiple buckets so that gradient reduction of each bucket can potentially overlap with backward computation.bucket_cap_mb controls the bucket size in MebiBytes (MiB). If None, a default size of 25 MiB will be used. (default: None)
• find_unused_parameters (bool) – Traverse the autograd graph from all tensors contained in the return value of the wrapped module’s forward function. Parameters that don’t receive gradients as part of this graph are preemptively marked as being ready to be reduced. In addition, parameters that may have been used in the wrapped module’s forwardfunction but were not part of loss computation and thus would also not receive gradients are preemptively marked as ready to be reduced. (default: False)
• check_reduction – This argument is deprecated.
• gradient_as_bucket_view (bool) – When set to True, gradients will be views pointing to different offsets of allreduce communication buckets. This can reduce peak memory usage, where the saved memory size will be equal to the total gradients size. Moreover, it avoids the overhead of copying between gradients and allreduce communication buckets. When gradients are views, detach_() cannot be called on the gradients. If hitting such errors, please fix it by referring to the zero_grad()function in torch/optim/optimizer.py as a solution. Note that gradients will be views after first iteration, so the peak memory saving should be checked after first iteration.
• static_graph (bool) –
  When set to True, DDP knows the trained graph is static. Static graph means 1) The set of used and unused parameters will not change during the whole training loop; in this case, it does not matter whether users setfind_unused_parameters = True or not. 2) How the graph is trained will not change during the whole training loop (meaning there is no control flow depending on iterations). When static_graph is set to be True, DDP will support cases that can not be supported in the past: 1) Reentrant backwards. 2) Activation checkpointing multiple times. 3) Activation checkpointing when model has unused parameters. 4) There are model parameters that are outside of forward function. 5) Potentially improve performance when there are unused parameters, as DDP will not search graph in each iteration to detect unused parameters when static_graph is set to be True. To check whether you can set static_graph to be True, one way is to check ddp logging data at the end of your previous model training, if ddp_logging_data.get("can_set_static_graph") == True, mostly you can set static_graph = True as well.
  Example::

  model_DDP = torch.nn.parallel.DistributedDataParallel(model)

  Training loop

  ...
  ddp_logging_data = model_DDP._get_ddp_logging_data()
  static_graph = ddp_logging_data.get("can_set_static_graph")

• delay_all_reduce_named_params (list of tuple of str and torch.nn.Parameter) – a list of named parameters whose all reduce will be delayed when the gradient of the parameter specified in param_to_hook_all_reduce is ready. Other arguments of DDP do not apply to named params specified in this argument as these named params will be ignored by DDP reducer.
• param_to_hook_all_reduce (torch.nn.Parameter) – a parameter to hook delayed all reduce of parameters specified in delay_all_reduce_named_params.

Variables

module (Module) – the module to be parallelized.

Example:

torch.distributed.init_process_group(backend='nccl', world_size=4, init_method='...') net = torch.nn.parallel.DistributedDataParallel(model)

join(divide_by_initial_world_size=True, enable=True, throw_on_early_termination=False)[source][source]¶

Context manager for training with uneven inputs across processes in DDP.

This context manager will keep track of already-joined DDP processes, and “shadow” the forward and backward passes by inserting collective communication operations to match with the ones created by non-joined DDP processes. This will ensure each collective call has a corresponding call by already-joined DDP processes, preventing hangs or errors that would otherwise happen when training with uneven inputs across processes. Alternatively, if the flag throw_on_early_termination is specified to be True, all trainers will throw an error once one rank runs out of inputs, allowing these errors to be caught and handled according to application logic.

Once all DDP processes have joined, the context manager will broadcast the model corresponding to the last joined process to all processes to ensure the model is the same across all processes (which is guaranteed by DDP).

To use this to enable training with uneven inputs across processes, simply wrap this context manager around your training loop. No further modifications to the model or data loading is required.

Warning

If the model or training loop this context manager is wrapped around has additional distributed collective operations, such asSyncBatchNorm in the model’s forward pass, then the flagthrow_on_early_termination must be enabled. This is because this context manager is not aware of non-DDP collective communication. This flag will cause all ranks to throw when any one rank exhausts inputs, allowing these errors to be caught and recovered from across all ranks.

Parameters

• divide_by_initial_world_size (bool) – If True, will divide gradients by the initial world_size DDP training was launched with. If False, will compute the effective world size (number of ranks that have not depleted their inputs yet) and divide gradients by that during allreduce. Setdivide_by_initial_world_size=True to ensure every input sample including the uneven inputs have equal weight in terms of how much they contribute to the global gradient. This is achieved by always dividing the gradient by the initialworld_size even when we encounter uneven inputs. If you set this to False, we divide the gradient by the remaining number of nodes. This ensures parity with training on a smallerworld_size although it also means the uneven inputs would contribute more towards the global gradient. Typically, you would want to set this to True for cases where the last few inputs of your training job are uneven. In extreme cases, where there is a large discrepancy in the number of inputs, setting this to False might provide better results.
• enable (bool) – Whether to enable uneven input detection or not. Pass in enable=False to disable in cases where you know that inputs are even across participating processes. Default isTrue.
• throw_on_early_termination (bool) – Whether to throw an error or continue training when at least one rank has exhausted inputs. If True, will throw upon the first rank reaching end of data. If False, will continue training with a smaller effective world size until all ranks are joined. Note that if this flag is specified, then the flagdivide_by_initial_world_size would be ignored. Default is False.

Example:

import torch import torch.distributed as dist import os import torch.multiprocessing as mp import torch.nn as nn

On each spawned worker

def worker(rank): dist.init_process_group("nccl", rank=rank, world_size=2) torch.cuda.set_device(rank) model = nn.Linear(1, 1, bias=False).to(rank) model = torch.nn.parallel.DistributedDataParallel( model, device_ids=[rank], output_device=rank ) # Rank 1 gets one more input than rank 0. inputs = [torch.tensor([1]).float() for _ in range(10 + rank)] with model.join(): for _ in range(5): for inp in inputs: loss = model(inp).sum() loss.backward() # Without the join() API, the below synchronization will hang # blocking for rank 1's allreduce to complete. torch.cuda.synchronize(device=rank)

join_hook(**kwargs)[source][source]¶

DDP join hook enables training on uneven inputs by mirroring communications in forward and backward passes.

Parameters

kwargs (dict) – a dict containing any keyword arguments to modify the behavior of the join hook at run time; allJoinable instances sharing the same join context manager are forwarded the same value for kwargs.

The hook supports the following keyword arguments:

divide_by_initial_world_size (bool, optional):

If True, then gradients are divided by the initial world size that DDP was launched with. If False, then gradients are divided by the effective world size (i.e. the number of non-joined processes), meaning that the uneven inputs contribute more toward the global gradient. Typically, this should be set to True if the degree of unevenness is small but can be set to False in extreme cases for possibly better results. Default is True.

no_sync()[source][source]¶

Context manager to disable gradient synchronizations across DDP processes.

Within this context, gradients will be accumulated on module variables, which will later be synchronized in the first forward-backward pass exiting the context.

Example:

ddp = torch.nn.parallel.DistributedDataParallel(model, pg) with ddp.no_sync(): for input in inputs: ddp(input).backward() # no synchronization, accumulate grads ddp(another_input).backward() # synchronize grads

Warning

The forward pass should be included inside the context manager, or else gradients will still be synchronized.

register_comm_hook(state, hook)[source][source]¶

Register communication hook for user-defined DDP aggregation of gradients across multiple workers.

This hook would be very useful for researchers to try out new ideas. For example, this hook can be used to implement several algorithms like GossipGrad and gradient compression which involve different communication strategies for parameter syncs while running Distributed DataParallel training.

Parameters

• state (object) –
  Passed to the hook to maintain any state information during the training process. Examples include error feedback in gradient compression, peers to communicate with next in GossipGrad, etc.
  It is locally stored by each worker and shared by all the gradient tensors on the worker.
• hook (Callable) –
  Callable with the following signature:hook(state: object, bucket: dist.GradBucket) -> torch.futures.Future[torch.Tensor]:
  This function is called once the bucket is ready. The hook can perform whatever processing is needed and return a Future indicating completion of any async work (ex: allreduce). If the hook doesn’t perform any communication, it still must return a completed Future. The Future should hold the new value of grad bucket’s tensors. Once a bucket is ready, c10d reducer would call this hook and use the tensors returned by the Future and copy grads to individual parameters. Note that the future’s return type must be a single tensor.
  We also provide an API called get_future to retrieve a Future associated with the completion of c10d.ProcessGroup.Work.get_future is currently supported for NCCL and also supported for most operations on GLOO and MPI, except for peer to peer operations (send/recv).

Warning

Grad bucket’s tensors will not be predivided by world_size. User is responsible to divide by the world_size in case of operations like allreduce.

Warning

DDP communication hook can only be registered once and should be registered before calling backward.

Warning

The Future object that hook returns should contain a single tensor that has the same shape with the tensors inside grad bucket.

Warning

get_future API supports NCCL, and partially GLOO and MPI backends (no support for peer-to-peer operations like send/recv) and will return a torch.futures.Future.

Example::

Below is an example of a noop hook that returns the same tensor.

def noop(state: object, bucket: dist.GradBucket) -> torch.futures.Future[torch.Tensor]: fut = torch.futures.Future() fut.set_result(bucket.buffer()) return fut ddp.register_comm_hook(state=None, hook=noop)

Example::

Below is an example of a Parallel SGD algorithm where gradients are encoded before allreduce, and then decoded after allreduce.

def encode_and_decode(state: object, bucket: dist.GradBucket) -> torch.futures.Future[torch.Tensor]: encoded_tensor = encode(bucket.buffer()) # encode gradients fut = torch.distributed.all_reduce(encoded_tensor).get_future() # Define the then callback to decode. def decode(fut): decoded_tensor = decode(fut.value()[0]) # decode gradients return decoded_tensor return fut.then(decode) ddp.register_comm_hook(state=None, hook=encode_and_decode)