Image Viewer Interactive Modes (original) (raw)

The ImageViewer class supports rich built-in and fully customizable and extensible user-interface interaction support for panning, zooming, the magnify glass, rubber-banding and many more operations. The class supports mouse, touch screen and/or multi-touch input.

To use an interactive mode, create an instance of one of the types derived from the ImageViewerInteractiveMode and add it to the ImageViewer.InteractiveModes collection. For example:

// Create an instance of Pan/Zoom interactive mode ImageViewerPanZoomInteractiveMode mode = new ImageViewerPanZoomInteractiveMode(); // Add it to the viewer imageViewer.InteractiveModes.Add(mode);

When the viewer is set up like the example above, clicking and dragging the mouse over the viewer surface will pan the image. CTRL-clicking and dragging will zoom the image in and out. Similarly, on devices that support touch input, pressing down and dragging will pan the image while dragging with two fingers will zoom in and out.

The ImageViewer supports the following built-in and fully functional interactive modes:

Customizing Mode Behavior

These interactive modes have extra functionality to further customize the behavior as well as being fully extensible for further detailed operations.

The ImageViewer.InteractiveModes property is a collection. Hence, you can add as many modes to the viewer as desired. This allows you to:

• Add all the interactive modes needed by the application once, then enable only the mode for the current application state
• Combine some interactive modes together for additional functionality

The following example will be used by all the code snippets below to demonstrate how to use this collection.

// Create a new image viewer instance using the default constructor ImageViewer imageViewer = new ImageViewer(); // Set some properties imageViewer.Dock = DockStyle.Fill; // Add it to the form this.Controls.Add(imageViewer); // Load an image into it using (RasterCodecs codecs = new RasterCodecs()) imageViewer.Image = codecs.Load(@"C:\LEADTOOLS22\Resources\Images\Ocr1.tif", 1);

The behavior resulting from the input action depends on several settings, as follows:

Mode Order

The IsEnabled Value

The MouseButtons Value

The CanStartWork Value

The following sections describe each of these factors in more detail.

The Order of the Modes in the Collection

The mode at the top of the collection (at index 0) will have the first chance of handling the action. If the interactive mode determines it should handle the event, it will set InteractiveEventArgs.IsHandled to true to indicate this to any remaining modes. The next mode in the collection then views the event, and so on with every registered interactive mode. A mode can be implemented to disregard the value of InteractiveEventArgs.IsHandled or to not set the value to true when handling the event so that multiple actions can result from one event. See the documentation for each of the built-in interactive modes for more information on how that particular mode reads or sets this property.

Add the following code to the example above:

// Add Pan/Zoom mode first ImageViewerPanZoomInteractiveMode panZoomMode = new ImageViewerPanZoomInteractiveMode(); imageViewer.InteractiveModes.Add(panZoomMode); // And Rubber Band mode second ImageViewerRubberBandInteractiveMode rubberBandMode = new ImageViewerRubberBandInteractiveMode(); imageViewer.InteractiveModes.Add(rubberBandMode);

Run the example and notice that only pan/zoom is usable: rubber-banding does not work. Now change the code as follows:

// And Rubber band mode first ImageViewerRubberBandInteractiveMode rubberBandMode = new ImageViewerRubberBandInteractiveMode(); imageViewer.InteractiveModes.Add(rubberBandMode); // Add Pan/Zoom mode second ImageViewerPanZoomInteractiveMode panZoomMode = new ImageViewerPanZoomInteractiveMode(); imageViewer.InteractiveModes.Add(panZoomMode);

Run the example and notice now that you can draw rubber bands but cannot pan/zoom anymore.

You can also change the order by using the collection to add/remove and insert items in different locations.

The Value of ImageViewerInteractiveMode.IsEnabled

Modes that are disabled will never run and ignore all events. IsEnabled is true by default.

Change the code in the example as follows:

// Add Rubber band first ImageViewerRubberBandInteractiveMode rubberBandMode = new ImageViewerRubberBandInteractiveMode(); // But disable it rubberBandMode.IsEnabled = false; imageViewer.InteractiveModes.Add(rubberBandMode); // Add Pan/Zoom mode second ImageViewerPanZoomInteractiveMode panZoomMode = new ImageViewerPanZoomInteractiveMode(); imageViewer.InteractiveModes.Add(panZoomMode);

Run the example and even though rubber band is the first mode, it is not usable: pan zoom is.

This is handled by each mode through the use of the InteractiveEventArgs.IsHandled property.

The Value of ImageViewerInteractiveMode.MouseButtons

The 'MouseButtons' are used when the device supports mouse input. This value is MouseButtons.Left, but you can change it to attach an interactive mode to a different button.

Change the code in the example as follows:

// Add Rubber band first ImageViewerRubberBandInteractiveMode rubberBandMode = new ImageViewerRubberBandInteractiveMode(); // Assign it to left mouse button (this is the default) rubberBandMode.MouseButtons = MouseButtons.Left; imageViewer.InteractiveModes.Add(rubberBandMode); // Add Pan/Zoom mode second ImageViewerPanZoomInteractiveMode panZoomMode = new ImageViewerPanZoomInteractiveMode(); // Assign to the right mouse button panZoomMode.MouseButtons = MouseButtons.Right; imageViewer.InteractiveModes.Add(panZoomMode);

Run the example. Now using the left mouse button will draw a rubber band while using the right mouse button will pan and zoom.

The order of the modes and the state of IsEnabled still applies when multiple modes are attached to the same mouse button.

Note that in touch devices that do not support a mouse, the touch input is treated as a left mouse button. Attaching a mode to any other mouse button will have no effect. However, if the application is designed to support both mouse and touch events (for example, a web application) then you can assign modes to left and right mouse buttons for extra functionality when the application is running in a desktop browser that supports mouse or both mouse and touch.

You can also set an interactive mode MouseButtons property to a combination of values. For example MouseButtons.Left | MouseButtons.Right. This will instruct the mode to run when either mouse button is pressed.

Some interactive modes can run when the value of MouseButtons is MouseButtons.None. For example:

// Add auto-pan attached to left mouse button ImageViewerAutoPanInteractiveMode autoPanMode = new ImageViewerAutoPanInteractiveMode(); autoPanMode.MouseButtons = MouseButtons.Left; imageViewer.InteractiveModes.Add(autoPanMode);

Run the example and click and move the mouse to the edge of the viewer and see how it pans the image to that direction. Now change as follows:

// Add auto-pan, not attached to any button ImageViewerAutoPanInteractiveMode autoPanMode = new ImageViewerAutoPanInteractiveMode(); autoPanMode.MouseButtons = MouseButtons.None; imageViewer.InteractiveModes.Add(autoPanMode);

Run the example and see how auto-pan works now when no mouse button is pressed.

The Value of ImageViewerInteractiveMode.CanStartWork

This virtual method is called by the base class to check the standard conditions (such as the IsEnabled and MouseButtons property described above) as well as any further custom condition such as the value of WorkOnBounds, Item, ItemPart.

Change the code in the example to use multiple items:

// Create a new image viewer instance with a vertical layout ImageViewerViewLayout viewLayout = new ImageViewerVerticalViewLayout(); ImageViewer imageViewer = new ImageViewer(viewLayout); // Set some properties imageViewer.Dock = DockStyle.Fill; imageViewer.BackColor = Color.Bisque; // Add a border (need some padding as well) imageViewer.ImageBorderThickness = 1; // Add some padding imageViewer.ItemPadding = new Padding(80); // Use a border around the items so we can see them imageViewer.ItemBackgroundColor = Color.Yellow; imageViewer.ItemBorderThickness = 1; // Add it to the form this.Controls.Add(imageViewer); imageViewer.BringToFront(); // Add a couple of items imageViewer.Items.AddFromImageFile(@"C:\LEADTOOLS22\Resources\Images\sample1.png", 1); imageViewer.Items.AddFromImageFile(@"C:\LEADTOOLS22\Resources\Images\sample2.png", 1);

Now add the following interactive mode:

ImageViewerRubberBandInteractiveMode mode = new ImageViewerRubberBandInteractiveMode(); imageViewer.InteractiveModes.Add(mode);

Notice how if you try to draw a rubber band outside the yellow item boxes, the mode does not run. This is because the default value of ItemPart is Content and the default value of WorkOnBounds is true. Meaning: Only work on the content (inside the item) part of an item. The mode will perform hit-testing on the item and if the condition is not met, it will not run.

Change the code as follows:

ImageViewerRubberBandInteractiveMode mode = new ImageViewerRubberBandInteractiveMode(); mode.WorkOnBounds = false; imageViewer.InteractiveModes.Add(mode);

Now, even though the part is still Content, we instructed the mode to ignore this value and not perform hit-testing. Run the code and notice how you can pan/zoom on any part inside the viewer control.

To work on a specific part of the item, we need to perform the following steps:

• Make sure we will work on an item. So set AutoItemMode to ImageViewerAutoItemMode.AutoSet or ImageViewerAutoItemMode.AutoSetActive
• Set WorkOnBounds to true
• Finally, set ItemPart to the desired value

For example, this code will make sure rubber band will only work on the image part of an item.

ImageViewerRubberBandInteractiveMode mode = new ImageViewerRubberBandInteractiveMode(); mode.AutoItemMode = ImageViewerAutoItemMode.AutoSet; mode.ItemPart = ImageViewerItemPart.Image; mode.WorkOnBounds = true; imageViewer.InteractiveModes.Add(mode);

Finally, restrict the mode to work on a certain item (optional). The following code will allow rubber band to work on the second item (index of 1) only. Note that we set AutoItemMode to None so the mode does not change the Item property.

ImageViewerRubberBandInteractiveMode mode = new ImageViewerRubberBandInteractiveMode(); mode.AutoItemMode = ImageViewerAutoItemMode.None; mode.Item = imageViewer.Items[1]; mode.ItemPart = ImageViewerItemPart.Image; mode.WorkOnBounds = true; imageViewer.InteractiveModes.Add(mode);

Run the example and notice that the rubber band only works on the second item.

Combining Interactive Modes

Some interactive modes can be combined with others to provide extra functionality. For example, ImageViewerAutoPanInteractiveMode can be combined with any other mode to allow auto-panning the viewer while the other mode is running.

Change the code as follows:

// Add auto-pan, also left button ImageViewerAutoPanInteractiveMode autoPanMode = new ImageViewerAutoPanInteractiveMode(); autoPanMode.MouseButtons = MouseButtons.Left; imageViewer.InteractiveModes.Add(autoPanMode); // Add rubber-band, left button ImageViewerRubberBandInteractiveMode rubberBandMode = new ImageViewerRubberBandInteractiveMode(); rubberBandMode.MouseButtons = MouseButtons.Left; imageViewer.InteractiveModes.Add(rubberBandMode);

Run the example, and notice that when drawing a rubber band and moving towards the edge of the viewer, it will pan in that direction. This is the auto-pan performing extra functionality for the rubber-band.

This is possible because auto-pan does not set the value of InteractiveEventArgs.IsHandled to true. Hence, the event will propagate to the next interactive mode in the list: the rubber-band.