Purchasing Advisor for Laser Mirrors (original) (raw)
Find all you need for professional sourcing of laser mirrors: a comprehensive expert-curated directory of suppliers, scientific and technical background information, and an interactive AI-based tool with guidance for a structured decision process.
NEW: Not only hardware can be listed here, but also consulting, software, training on laser mirrors, etc. – see the "offer types" below.
🌐 You appear to be visiting from North America. Many listed suppliers are based in this region, making the RP Photonics Buyer's Guide highly relevant for your needs.
Purchasing high-value photonics products is a substantial responsibility. Using a structured decision-making process and high quality supplier data helps a lot:
- Find all relevant suppliers (not limited to advertisers).
- Our interactive tool conveniently assists you in defining and applying your application-specific requirements.
Note that purchasing decisions based on just a few randomly picked suppliers and without carefully defined specifications are risky; therefore, we strongly recommend using our data and tool. See also:
- How Responsible Purchase Decisions for Expensive Goods Like Lasers Are Done
- Explanations on this purchasing tool
Go through the process:
1. Understand the technical background
2. Define your requirements
It is essential to fully understand and clearly define your requirements before you purchase.
We recommend that you develop a list of clear specifications according to your specific needs, against which you can later check the suitability of found product offers:
To help you, we have already listed some aspects we recommend you consider when buying laser mirrors. Of course, there may be other aspects that are relevant to your specific case.
This list is for your own preparation, and can later (possibly in modified form) be used for quotation requests to suppliers.
I think that I am sufficiently informed about our requirements.
Otherwise, you will need to talk to your technical colleagues.
I consider the above list of specifications to be sufficiently complete, clear and accurate.
If you cannot sufficiently clarify your requirements, you may want to get technical consultancy from RP Photonics.
Insert these criteria when creating inquiry mails to suppliers with the buttons "Get quotation".
You find these buttons in the supplier list below or under "3. Find suitable suppliers".
3. Find suitable suppliers
We suggest three steps:
- Below, you can find our list of suppliers for laser mirrors. Use the checkboxes to mark possibly suitable suppliers.
- The selected suppliers will appear below this list, along with your list of specifications. You can then indicate which specifications they meet according to your research. (You should finalize your specifications before doing this.)
- Based on the results, you can finally choose a supplier that is hopefully a good enough fit.
Selected suppliers:
(none so far)
Decision
The most suitable supplier you found:
Comments, e.g. reasons for your choice, or things which still need to be checked:
4. Document the decision process
It is essential to document your purchasing process, not only its result (chosen supplier):
- You will find it easier next time.
- If something goes wrong, you can defend your decision by showing that you properly considered all important aspects. Or you see what needs to be done better next time.
Our interactive tool makes it easy: Fill out the form, and in the end print it to a PDF. Note that the document will show all sections (including those not currently shown on the screen), while omitting some irrelevant details such as the page navigation.
Suppliers for Laser Mirrors
133 suppliers for laser mirrors are listed in the RP Photonics Buyer's Guide, out of which 15 present their product descriptions and images. Both manufacturers and distributors can be registered.
 IRD Glass810 E St Paul St.Litchfield, MN 55355United StatesSee us at Photonics West 2026 in San Francisco, Jan. 20–22 (booth 3312)! |
⚙ hardware IRD Glass manufactures laser mirrors that are used for interferometry, beam steering or folding, and many optical components within imaging systems. Our optical mirrors are completely customizable to meet our clients’ needs. From a basic protected aluminum through high laser damage threshold mirrors, IRD will certify the performance and specifications with whatever data you require. Product-specific web page |
|---|
 Precision Optics & Coatings for High Energy Laser Applications Perkins Precision Developments4110 North Valley DriveLongmont, CO 80504United StatesSee us at Photonics West 2026 in San Francisco, Jan. 20–22 (booth 2048)! |
⚙ hardware Perkins Precision Developments (PPD) manufactures high energy laser (HEL) mirrors and precision optics for both prototype and volume OEM requirements for wavelengths from 350nm to 3um. We also offer custom Ion Beam Sputtered (IBS) thin film coatings for visible to near-infrared wavelengths on customer supplied substrates. PPD utilizes IBS coating technology because it is ideal for complex spectral designs, high power lasers and applications where it is critical to minimize losses from absorption and scatter. Super-polished laser mirrors and cavity mirror substrates are also available with surface roughness as low as < 1 angstrom RMS! Typical mirror coatings include dielectric low-loss high reflectors (HR), multi-wavelength high reflectors, dichroic mirrors, trichroic mirrors, beam splitter mirrors and low phase shift mirrors. Our low overhead structure and production flexibility are designed to maximize both quality and value to our customers. Product-specific web page |
|---|
 Optical components at better price SinoptixOffice 16 D, Yujia MansionN° 1336 HuaShan RoadShanghai 200052China |
⚙ hardware We offer competitive laser mirrors — laser cavity mirrors, total reflecting mirrors, CO2 laser mirrors, etc. High quality high reflecting coatings with advanced damage threshold. Product-specific web page |
|---|
 Exail (formerly iXblue)34, Rue de la Croix de Fer78100 Saint Germain-en-LayeFranceSee us at Photonics West 2026 in San Francisco, Jan. 20–22 (booth 5039)! |
⚙ hardware Fiber Bragg grating mirrors are critical components used to realize laser cavities and are ideal for high power fiber lasers. Exail’s mirrors have been customized to address the specific requirements of high efficiency and laser applications. Exail (formerly iXblue) offers these wavelength-selective mirrors on a complete range of specialty fibers for high power handling and standard applications. An optimized manufacturing process and testing ensure their long-term reliability in fiber lasers. Exail offers a dissipative package for thermal management of the FBG to ensure stability at high optical power. Benefits and features: single-mode and double-clad versions available, also PM and custom versions full passive assembly (dissipative package) available, providing protection of FBG and splices good power handling specific recoating for pump guidance Product-specific web page |
|---|
 The Future Depends on Optics Edmund Optics101 East Gloucester PikeBarrington, NJ 08007United StatesSee us at Photonics West 2026 in San Francisco, Jan. 20–22 (booth 1139)! |
⚙ hardware Edmund Optics offers a range of laser mirrors for use from the extreme ultraviolet (EUV) to the far IR. Laser mirrors designed for dye, diode, Nd:YAG, Nd:YLF, Yb:YAG, Ti:sapphire, fiber, and many more laser sources are available as flat mirrors, right angle mirrors, concave mirrors, and other specialty shapes. Ultrafast laser line mirrors designed to provide high reflection with minimal group delay dispersion (GDD) for femtosecond pulsed lasers including Er:glass, Ti:sapphire, and Yb:doped laser sources are also available. Product-specific web page |
|---|
 Your problem is our challenge – flexibility is our standard! Artifex Engineering GmbH & Co KGDortmunder Str. 16–1826723 EmdenGermany |
⚙ hardware Artifex Engineering offers custom laser mirrors tailored to your requirements. Laser mirrors mostly use dielectric coatings that are particularly developed for the respective application and enable precise wavelength ranges, so that individual wavelengths or selected ranges can be specified. Visit our product page for more information. We look forward to your inquiry. Product-specific web page |
|---|
 Optogama(4Lasers)Mokslininku str. 6B08412 VilniusLithuaniaSee us at Photonics West 2026 in San Francisco, Jan. 20–22 (booth 1565)! |
⚙ hardware Laser line mirrors from Optogama exhibit high reflectance over a particular spectral range, extending <10% of the central wavelength, at a specific angle of incidence and polarization for non-normal incidence. Reflectance properties are based on the optical interference phenomena of reflections from multiple dielectric thin-film layers, which are carefully deposited on UV grade fused silica optical substrates. Product-specific web page |
|---|
 Home of high power optics and coatings LASEROPTIKJohannes-Ebert-Str. 130826 GarbsenGermany |
⚙ hardware LASEROPTIK can produce a wide range of laser mirrors with high reflectivity (HR) or partial reflectivity at given wavelength. We can also make specialty mirrors, e.g. with extremely broad reflection bands. We use different coating technologies depending on your detailed requirements. Product-specific web page |
|---|
 Bringing quality into focus Knight Optical (UK)Roebuck Business ParkHarrietsham, Kent ME17 1ABUnited Kingdom |
⚙ hardware Knight Optical supplies laser mirrors ideal for the most demanding applications. Coated using ion beam sputtering (IBS) our ultrafast laser mirrors exhibit a low GDD and high LIDT due to the compact and durable nature of the coating. Broadband and wide-angle options are also available off-the-shelf. Our mirrors are ideal for Yb:YAG, Yb:KGW, Yb: KYW, Ti:sapphire lasers, and many more. We also excel at working with our customers to provide custom optical components meeting their design specifications. Product-specific web page |
|---|
 Lasers, Optics, Electronics. Made in Germany. ALPHALAS GmbHBertha-von-Suttner-Str. 537085 GöttingenGermany |
⚙ hardware Dielectric mirrors for most standard laser wavelengths and their harmonics at angle of incidence 0° or 45° with different dimensions are available from stock. They feature high laser-induced damage threshold. Customer-specific designs can also be implemented. Product-specific web page |
|---|
 Quality You Can Trust, Expertise You Can See. Hangzhou Shalom Electro-optics Technology Co., Ltd.A635, Boke MansionNo. 9 Xiyuan RoadXihu District, Hangzhou 310030China |
⚙ hardware🧩 accessories and parts🧴 consumables🔧 maintenance, repair📏 metrology, calibration, testing💡 consulting🧰 development Hangzhou Shalom EO offers a wide range of laser mirrors, including: — laser line mirrors, consisting of Corning UV fused silica substrates and high-reflectance ((Rs + Rp) / 2 > 99.9%) dielectric coatings at laser harmonic or fundamental wavelengths from 266 nm to 1550 nm high power laser mirrors with a laser damage threshold of 20 J/cm2 @ 1064 nm, 10 ns, 10 Hz laser output couplers, designed for 0° AOI, for miscellaneous laser types like Nd:YAG, diode laser, ytterbium laser, etc. metallic coated laser mirrors ultrafast mirrors, excellent for femtosecond lasers, including ultrafast-enhanced silver mirrors, femtoline low GDD mirrors, and chirped mirrors. In addition, we also provide CO2 laser mirrors. Shalom EO utilizes a set of premium coatings, e.g., (BBAR dielectric coatings, metallic mirrors, laser line V coatings, and low GDD coating technologies for ultrafast applications) to achieve the optimum optical results. The use of leading-edge equipment, such as Zygo interferometers and PerkinElmer Lambda 1050+ spectroscopes, allows Shalom EO to maintain rigorous quality standards for our laser mirrors. High precision laser grade mirrors are one of Shalom EO’s special know-how. Those mirrors feature high flatness, high damage threshold, and superior surface quality. Both off-the-shelf and customized laser mirrors are available for our customers. Product-specific web page |
|---|
 Custom Precision optical components Ecoptik (Changchun) Ltd.Building 13No. 832 Chengyuan Road, High-tech ZoneChangchun 130103ChinaSee us at Photonics West 2026 in San Francisco, Jan. 20–22 (booth 1767)! |
⚙ hardware Ecoptik offers dielectric laser mirrors for fixed, narrowband or broadband wavelength applications, covering wavelength ranges from UV to IR. There is a wide choice of round, elliptical or custom shapes as well as flat, spherical and cylindrical surfaces. Features: greater than 99% reflectivity over broad wavelength ranges designed for all polarization states from 0 — 45° AOI excellent thermal stability with fused silica substrate Note: We manufacture ourselves, offering very competitive prices. We are ISO 9001:2015 certified company. We quote to win customers for a long term and deliver a high quality customer service. We have one of the best metrology equipment to make sure that we deliver what you expect. Product-specific web page |
|---|
Your company's products are not listed here? Get our Advertising Package to enjoy that and many other benefits!
If any displayed information is incorrect (e.g., a listed supplier does not offer such products) or legally problematic, please notify RP Photonics so that the problem can be solved.
Report Additional Suppliers for These Products
If you are a supplier and want to be listed, please use the registration form.
An already registered supplier can use a customized form to report the full list of offered photonics products. That form is reachable with the red button "Edit profile data" on the supplier's profile page.
Anyone, not only suppliers themselves, can [**report additional suppliers**](/report%5Fsupplier.html?product=Laser Mirrors).