large-core fibers (original) (raw)

Acronym: LCF

Definition: optical fibers with relatively large fiber core

Category: article belongs to category fiber optics and waveguides fiber optics and waveguides

Related: fiberslarge mode area fiberseffective mode area

Page views in 12 months: 630

DOI: 10.61835/vma Cite the article: BibTex BibLaTex plain textHTML Link to this page! LinkedIn

Content quality and neutrality are maintained according to our editorial policy.

📦 For purchasing large-core fibers, use the RP Photonics Buyer's Guide — an expert-curated directory for finding all relevant suppliers, which also offers advanced purchasing assistance.

Contents

A large-core fiber is an optical fiber having a fiber core which is relatively large. It can be a multimode fiber or a single-mode fiber.

Large-core Multimode Fibers

Large-core multimode fibers have a core diameter which is well above the typically used 50 μm or 62.5 μm of telecom fibers — for example, 100 μm or even 400 μm. The core is often not much smaller than the fiber cladding (see Figure 1). The cladding diameter may substantially go beyond the usual 125 μm to realize even larger cores. The number of guided fiber modes is then usually very high.

large-core multimode fiber

Figure 1: Design of a large-mode multimode fiber with 105 μm core diameter and 125 μm cladding diameter.

Frequently, such fibers have a pure silica fiber core (rather than e.g. a germanosilicate core) and a fiber cladding with somewhat reduced refractive index, e.g. achieved with fluorine doping. For realizing a high numerical aperture, however, one may still use fibers with germanosilicate core.

Typical applications of large-core multimode fibers are the passive transport of light e.g. in the context of illumination, laser material processing or optical pumping of solid-state lasers.

Large-core Single-mode Fibers

If a large-core fiber is a single-mode fiber, it also has a large effective mode area. Here, the term large mode area fiber is more common and more appropriate, since the large mode area is a particularly important property: it results in reduced nonlinear optical effects combined with a high beam quality.

standard and large mode area fiber

Figure 2: Comparison of bare (uncoated) fibers with a standard core size (e.g. 8 μm diameter) and a large core (50 μm diameter).

Frequently Asked Questions

This FAQ section was generated with AI based on the article content and has been reviewed by the article’s author (RP).

What is a large-core fiber?

What are typical applications of large-core multimode fibers?

What is the benefit of a large core in single-mode fibers?

What materials are large-core fibers made of?

They often have a pure silica core and a fluorine-doped cladding to achieve a reduced refractive index. For a high numerical aperture, a germanosilicate core might be used.

Suppliers

Questions and Comments from Users

Here you can submit questions and comments. As far as they get accepted by the author, they will appear above this paragraph together with the author’s answer. The author will decide on acceptance based on certain criteria. Essentially, the issue must be of sufficiently broad interest.

Please do not enter personal data here. (See also our privacy declaration.) If you wish to receive personal feedback or consultancy from the author, please contact him, e.g. via e-mail.

By submitting the information, you give your consent to the potential publication of your inputs on our website according to our rules. (If you later retract your consent, we will delete those inputs.) As your inputs are first reviewed by the author, they may be published with some delay.