multiphoton absorption (original) (raw)

Author: the photonics expert (RP)

Definition: absorption processes where multiple photons are absorbed simultaneously

Alternative term: multi-photon absorption

Category: article belongs to category physical foundations physical foundations

Related: nonlinear absorptiontwo-photon absorptionfluorescence microscopylaser-induced damage

Page views in 12 months: 1424

DOI: 10.61835/o1o Cite the article: BibTex BibLaTex plain textHTML Link to this page! LinkedIn

Content quality and neutrality are maintained according to our editorial policy.

Contents

What is Multiphoton Absorption?

In a dielectric materials or a semiconductor, linear electronic absorption can occur only if the photon energy is at least as large as the band gap energy. This is because the smallest amount of energy for an electronic excitation is dictated by the band gap. However, at high optical intensity it is possible to bridge that band gap by simultaneous absorption of two or more lower-energy photons, where the sum of photon energies exceeds the bandgap energy. Such nonlinear absorption processes are called multiphoton absorption (or multi-photon absorption). The simplest variant is two-photon absorption, where only two photons are required. If the bandgap energy of a material is 2.8 times the photon energy of a laser beam, for example, only three-photon absorption and higher-order absorption processes can occur, since the photon energy is insufficient for linear and two-photon absorption.

While the absorption rate for linear absorption is simply proportional to the optical intensity, for multiphoton absorption processes of order ($n$), the absorption rate is proportional to the ($n$)th power of the optical intensity. This implies that such absorption rates can be very small for low or moderate optical intensities, but can become dominant for very high optical intensities, as can be reached particularly with focused laser pulses. The absorption coefficient is proportional to the ($(n - 1)$)th power of the optical intensity.

Examples of Multiphoton Absorption

Multiphoton absorption processes are often involved in laser-induced damage when it occurs in transparent media. Transparency of such a medium means that linear electronic absorption is not possible for the considered optical wavelength, so that virtually no energy can be deposited by light with low optical intensity. However, multiphoton absorption can become substantial at high enough optical intensities, so that energy can be deposited, and a runaway process can start which ultimately causes optical damage to the material. This is also exploited in laser material processing on transparent materials such as glasses.

Another example is fluorescence microscopy, where multiphoton absorption (mostly two-photon or three-photon absorption) is often utilized, where the excitation light from a femtosecond laser is strongly focused. Compared with linear excitation, the first practical advantage of multiphoton excitation is that a laser source with longer emission wavelength can be used, which is often less difficult to make because a nonlinear frequency conversion stage is not needed. A second advantage is that longer-wavelength light can more easily propagate through some depth of material without being strongly absorbed, as long as the beam radius is large enough; only in the beam focus, where the optical intensities become substantially higher, multiphoton absorption processes become strong. A third advantage is that the preferential absorption in the beam focus helps one to obtain a higher longitudinal image resolution and less interference from fluorescence light created in other planes than the image plane.

Frequently Asked Questions

This FAQ section was generated with AI based on the article content and has been reviewed by the article’s author (RP).

What is multiphoton absorption?

It is a nonlinear absorption process where a material simultaneously absorbs two or more photons. This can cause an electronic excitation if the sum of the photon energies is large enough (e.g., exceeds the band gap energy), even when a single photon's energy is insufficient.

How does the multiphoton absorption rate depend on light intensity?

For a process involving the absorption of ($n$) photons, the absorption rate is proportional to the ($n$)th power of the optical intensity. Consequently, this effect is very weak at low intensities but can become dominant at the high intensities of focused laser beams.

What are common applications of multiphoton absorption?

Why is multiphoton absorption useful for microscopy?

It enables the use of longer-wavelength light that penetrates deeper into scattering samples. Because absorption is confined to the tiny focal volume, it also provides excellent spatial resolution and reduces out-of-focus background fluorescence.

Questions and Comments from Users

Here you can submit questions and comments. As far as they get accepted by the author, they will appear above this paragraph together with the author’s answer. The author will decide on acceptance based on certain criteria. Essentially, the issue must be of sufficiently broad interest.

Please do not enter personal data here. (See also our privacy declaration.) If you wish to receive personal feedback or consultancy from the author, please contact him, e.g. via e-mail.

By submitting the information, you give your consent to the potential publication of your inputs on our website according to our rules. (If you later retract your consent, we will delete those inputs.) As your inputs are first reviewed by the author, they may be published with some delay.