optical frequency multipliers (original) (raw)

Author: the photonics expert (RP)

Definition: devices which convert light to other light with optical frequencies which are integer multiples of the original frequency

Alternative term: optical harmonic generators

Categories: article belongs to category nonlinear optics nonlinear optics, article belongs to category photonic devices photonic devices

nonlinear optical effects
- nonlinear frequency conversion devices
  * frequency doubling
  * frequency tripling
  * frequency quadrupling
  * sum and difference frequency generation
  * optical rectification
  * supercontinuum generation
  * optical parametric oscillation and generation
  * stimulated Raman scattering
  * intracavity frequency doubling
  * optical frequency multipliers
  * optical frequency doublers
  * triplers
  * quadruplers
  * high harmonic generation
  * (more topics)

Opposite term: subharmonic generators

Page views in 12 months: 288

DOI: 10.61835/1je Cite the article: BibTex BibLaTex plain text HTML Link to this page! LinkedIn

Content quality and neutrality are maintained according to our editorial policy.

What are Optical Frequency Multipliers?

There are various kinds of optical devices which can (partially) convert light to other light where the optical frequency is an integer multiple of the original optical frequency. Such optical frequency multipliers (or optical harmonic generators) are based on one or several optical nonlinearities.

The term optical frequency multipliers is less common than the more specific terms frequency doublers, triplers etc.

Common Frequency Multipliers

The following types of frequency multipliers are common:

Of the simplest kind are frequency doublers, based on second-harmonic generation in transparent nonlinear crystal materials with a χ^{(2)} nonlinearity. It is particularly common to generate green light by frequency doubling of infrared light in the 1-μm spectral region, where many lasers operate. However, frequency doublers can also be realized in other spectral regions.
By combining a frequency doubler with another device for sum frequency generation of the harmonic wave with some of the original pump light, one achieves frequency tripling. Generally, different nonlinear crystals are used for doubling and sum frequency generation. The most common application is to produce ultraviolet light, e.g. by frequency tripling from 1064 nm wavelength to 355 nm.
Frequency quadrupling can be achieved by combining two frequency doublers. The most common application is to generate UV light at 266 nm from 1064-nm light.
The fifth harmonic of a laser beam can be generated by frequency quadrupling with subsequent sum frequency generation.

Conversion Efficiency

Generally, efficient optical frequency multipliers can be operated only with laser light having a sufficiently high optical power and beam quality because the required nonlinear processes can be reasonably efficient only for sufficiently intense and coherent light. While frequency doubling alone can often be done with a high conversion efficiency — sometimes above 80% –, the conversion efficiency for higher harmonics is usually substantially lower.

Physics Details

Considering the particle nature of light, frequency multiplication processes imply that lower-energy input photons are converted into a correspondingly smaller number of higher-energy photons.

In most cases, optical frequency multiplication is performed with quasi-monochromatic light. This is not only because laser sources happen to be quasi-monochromatic in many cases, but also because phase matching in the used nonlinear crystals can usually be achieved only in a quite limited optical frequency interval.

When applying optical frequency multiplication to monochromatic light, one obtains light with precisely integer multiples of the original optical frequency. The involved processes are fully coherent, i.e., for every optical cycle of the input light one obtains two optical cycles, for example, in frequency doubling. This effect can be exploited in optical frequency metrology, e.g. for optical frequency chains.

Frequently Asked Questions

This FAQ section was generated with AI based on the article content and has been reviewed by the article’s author (RP).

What is an optical frequency multiplier?

An optical frequency multiplier is a device that uses optical nonlinearities to convert input light into new light with an optical frequency that is an integer multiple of the original frequency. They are also called optical harmonic generators.

What are common types of optical frequency multipliers?

Common types include frequency doublers for second-harmonic generation, frequency triplers (usually combining doubling with sum frequency generation), and frequency quadruplers, which typically use two consecutive frequency doublers.

What kind of light is needed for efficient frequency multiplication?

Efficient frequency multiplication requires intense and coherent light, usually from a laser with high optical power and beam quality. Also, the light should be quasi-monochromatic to satisfy the phase matching conditions of the nonlinear crystal.

What are typical applications of frequency tripling and quadrupling?

A common application is generating ultraviolet light from powerful infrared lasers. For example, light from a 1064-nm laser can be frequency-tripled to 355 nm or quadrupled to 266 nm.

Questions and Comments from Users

Here you can submit questions and comments. As far as they get accepted by the author, they will appear above this paragraph together with the author’s answer. The author will decide on acceptance based on certain criteria. Essentially, the issue must be of sufficiently broad interest.

Please do not enter personal data here. (See also our privacy declaration.) If you wish to receive personal feedback or consultancy from the author, please contact him, e.g. via e-mail.

By submitting the information, you give your consent to the potential publication of your inputs on our website according to our rules. (If you later retract your consent, we will delete those inputs.) As your inputs are first reviewed by the author, they may be published with some delay.