Hexaamminecobalt(III) chloride (original) (raw)
From Wikipedia, the free encyclopedia
Hexaamminecobalt(III) chloride
Names | |
IUPAC name Hexaamminecobalt(III) chloride | |
Other namesCobalt hexammine chloride, hexaamminecobalt(III) chloride | |
Identifiers | |
CAS Number | 10534-89-1 Y |
3D model (JSmol) | Interactive image |
ChemSpider | 140101 |
ECHA InfoCard | 100.030.991 |
EC Number | 234-103-9 |
PubChem CID | 159295 |
UNII | 240056WZHT Y |
CompTox Dashboard (EPA) | DTXSID1044358 |
InChI InChI=1S/3ClH.Co.6H3N/h3*1H;;6*1H3/q;;;+3;;;;;;/p-3Key: JXBGZYGSWFSYFI-UHFFFAOYSA-K | |
SMILES [NH3+][Co-3]([NH3+])([NH3+])([NH3+])([NH3+])[NH3+].[Cl-].[Cl-].[Cl-] | |
Properties | |
Chemical formula | H18N6Cl3Co |
Molar mass | 267.48 g/mol |
Appearance | yellow or orange crystals |
Density | 1.71 g/cm3, |
Melting point | decomposes |
Solubility in water | 0.26 M (20 °C) tribromide: 0.04 M (18 °C) |
Solubility | soluble in NH3 |
Structure | |
Coordination geometry | octahedral |
Dipole moment | 0 D |
Hazards | |
Occupational safety and health (OHS/OSH): | |
Main hazards | poison |
GHS labelling: | |
Pictograms | |
Signal word | Warning |
Hazard statements | H315, H319, H335 |
Precautionary statements | P261, P264, P271, P280, P302+P352, P304+P340, P305+P351+P338, P312, P321, P332+P313, P337+P313, P362, P403+P233, P405, P501 |
Related compounds | |
Other anions | [Co(NH3)6]Br3Co(NH3)63 |
Other cations | [Cr(NH3)6]Cl3[Ni(NH3)6]Cl2 |
Related compounds | [Co(H2NCH2CH2NH2)3]Cl3 [Co(NH3)5(H2O)]Cl3[Co(NH3)5Cl]Cl2 |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). N verify (what is YN ?) Infobox references |
Chemical compound
Hexaamminecobalt(III) chloride is the chemical compound with the formula [Co(NH3)6]Cl3. It is the chloride salt of the coordination complex [Co(NH3)6]3+, which is considered an archetypal "Werner complex", named after the pioneer of coordination chemistry, Alfred Werner. The cation itself is a metal ammine complex with six ammonia ligands attached to the cobalt(III) ion.
Properties and structure
[edit]
[Co(NH3)6]3+ is diamagnetic, with a low-spin 3d6 octahedral Co(III) center. The cation obeys the 18-electron rule and is considered to be a classic example of an exchange inert metal complex. As a manifestation of its inertness, [Co(NH3)6]Cl3 can be recrystallized unchanged from concentrated hydrochloric acid: the NH3 is so tightly bound to the Co(III) centers that it does not dissociate to allow its protonation.[1] In contrast, labile metal ammine complexes, such as [Ni(NH3)6]Cl2, react rapidly with acids, reflecting the lability of the Ni(II)–NH3 bonds. Upon heating, hexamminecobalt(III) begins to lose some of its ammine ligands, eventually producing a stronger oxidant.
The chloride ions in [Co(NH3)6]Cl3 can be exchanged with a variety of other anions such as nitrate, bromide, iodide, sulfamate to afford the corresponding [Co(NH3)6]X3 derivative. Such salts are orange or bright yellow and display varying degrees of water solubility. The chloride ion can be also exchanged with more complex anions such as the hexathiocyanatochromate(III), yielding a pink compound with formula [Co(NH3)6] [Cr(SCN)6], or the ferricyanide ion.[_citation needed_]
[Co(NH3)6]Cl3 is prepared by treating cobalt(II) chloride with ammonia and ammonium chloride followed by oxidation. Oxidants include hydrogen peroxide or oxygen in the presence of charcoal catalyst.[1] This salt appears to have been first reported by Fremy.[2]
The acetate salt can be prepared by aerobic oxidation of cobalt(II) acetate, ammonium acetate, and ammonia in methanol.[3] The acetate salt is highly water-soluble to the level of 1.9 M (20 °C), versus 0.26 M for the trichloride.
Uses in the laboratory
[edit]
[Co(NH3)6]3+ is a component of some structural biology methods (especially for DNA or RNA, where positive ions stabilize tertiary structure of the phosphate backbone), to help solve their structures by X-ray crystallography[4] or by nuclear magnetic resonance.[5] In the biological system, the counterions would more probably be Mg2+, but the heavy atoms of cobalt (or sometimes iridium, as in PDB: 2GIS) provide anomalous scattering to solve the phase problem and produce an electron-density map of the structure.[6]
[Co(NH3)6]3+ is used to investigate DNA. The cation induces the transition of DNA structure from the classical B-form to the Z-form.[7]
- ^ a b Bjerrum, J.; McReynolds, J. P. (1946). "Hexamminecobalt(III) Salts". Inorg. Synth. 2: 216–221. doi:10.1002/9780470132333.ch69.
- ^ Fremy, M. E. (1852). "Recherches sur le cobalt". Ann. Chim. Phys. 35: 257–312.
- ^ Lindholm, R. D.; Bause, Daniel E. (1978). "Complexes of Cobalt Containing Ammonia or Ethylene Diamine: Hexaamminecobalt(III) Salts". Inorg. Synth. 18: 67–69. doi:10.1002/9780470132494.ch14.
- ^ Ramakrishnan, B.; Sekharudu, C.; Pan, B.; Sundaralingam, M. (2003). "Near-atomic resolution crystal structure of an A-DNA decamer d(CCCGATCGGG): cobalt hexammine interaction with A-DNA". Acta Crystallogr. D59 (Pt 1): 67–72. Bibcode:2003AcCrD..59...67R. doi:10.1107/s0907444902018917. PMID 12499541.
- ^ Rudisser, S.; Tinoco, I. Jr. (2000). "Solution structure of Cobalt(III)hexammine complexed to the GAAA tetraloop, and metal-ion binding to G.A mismatches". J. Mol. Biol. 295 (5): 1211–1232. doi:10.1006/jmbi.1999.3421. PMID 10653698.
- ^ McPherson, Alexander (2002). Introduction to Macromolecular Crystallography. John Wiley & Sons. ISBN 0-471-25122-4.
- ^ Brennant, R. G.; Westhof, E.; Sundaralingam, M. (1986). "Structure of a Z-DNA with Two Different Backbone Chain Conformations. Stabilization of the Decadeoxyoligonucleotide d(CGTACGTACG) by [CO(NH3)6]3+Binding to the Guanine". Journal of Biomolecular Structure and Dynamics. 3 (4): 649–665. doi:10.1080/07391102.1986.10508453. PMID 3271042.