Sanghamitro Chatterjee - Academia.edu (original) (raw)

Papers by Sanghamitro Chatterjee

Industrial & Engineering Chemistry Research, May 18, 2023

Sadhana-academy Proceedings in Engineering Sciences, Feb 27, 2023

Journal of Applied Physics, Mar 28, 2017

Mass spectrometric investigations of plasma chemical reactions in a radiofrequency discharge with... more Mass spectrometric investigations of plasma chemical reactions in a radiofrequency discharge with Ar/C2H2 and Ar/C2H2/O2 gas mixtures

Sadhana-academy Proceedings in Engineering Sciences, Dec 14, 2021

We review recent studies on fomite transmission of COVID-19, caused by the novel coronavirus. In ... more We review recent studies on fomite transmission of COVID-19, caused by the novel coronavirus. In particular, we focus on survival time of coronavirus on solid and porous surfaces. Since the aqueous phase of a respiratory droplet serves as a medium for virus survival, evaporation of the droplet on a surface plays a crucial role in determining the virus survival time. While the bulk of the droplet takes a few seconds to evaporate, previous virus titer measurements revealed that the virus can survive for several hours or days on a surface. This long survival of virus has been attributed to a residual thin-liquid film which remains after drying of the bulk droplet. The evaporation of the thin-film is governed by the disjoining pressure within it and therefore, is a much slower process which causes the virus to survive longer. However, the aforesaid disjoining pressure is significantly modulated for the case of porous surfaces due to their typical geometries. This accelerates the thin-film evaporation on porous surfaces and thereby making them lesser susceptible to virus survival. Therefore, porous materials are deemed to be relatively safer for mitigating the spread of COVID-19 via fomite transmission. Using results of the reported research, we briefly discuss the possible recommendations to mitigate the spread of the disease.

Mechanical engineering series, 2020

Frontiers in Physics, Feb 24, 2015

In-Cell (PIC) simulations are carried out to investigate the effect of discharge length (L) and p... more In-Cell (PIC) simulations are carried out to investigate the effect of discharge length (L) and pressure (p) on Electron Energy Probability Function (EEPF) in a low pressure radio frequency (rf) inductively coupled plasma (ICP) at 13.56 MHz. It is found that for both cases of varying L (0.1-0.5 m) and p (1-10 mTorr), the EEPF is a bi-Maxwellian with a step in the bounded direction (x) and non-Maxwellian with a hot tail in the symmetric unbounded directions (y, z). The plasma space potential decreases with increase in both L and p, the trapped electrons having energies in the range 0-20 eV. In a conventional discharge bounded in all directions, we infer that L and p are similarity parameters for low energy electrons trapped in the bulk plasma that have energies below the plasma space potential (eV p). The simulation results are consistent with a particle balance model.

Physics of Fluids, May 1, 2021

Paper published as part of the special topic on Flow and the Virus This paper was selected as Fea... more Paper published as part of the special topic on Flow and the Virus This paper was selected as Featured ARTICLES YOU MAY BE INTERESTED IN Why coronavirus survives longer on impermeable than porous surfaces

Physics of Fluids, Feb 1, 2021

Paper published as part of the special topic on Flow and the Virus This paper was selected as Fea... more Paper published as part of the special topic on Flow and the Virus This paper was selected as Featured ARTICLES YOU MAY BE INTERESTED IN How coronavirus survives for days on surfaces

EPL, Jun 1, 2017

We present the effect of 0.5 keV Ar+ beam irradiation on the wetting properties of metallic thin ... more We present the effect of 0.5 keV Ar+ beam irradiation on the wetting properties of metallic thin films. Observations reveal a transition from hydrophilic to hydrophobic nature at higher beam fluences which can be attributed to a reduction in net surface free energy. In this low-energy regime, ion beams do not induce significant surface roughness and chemical heterogeneity. However, they cause implantation of atomic impurities in the near surface region of the target and thus form a heterogeneous system at atomic length scales. Interestingly, the presence of implanted Ar atoms in the near surface region modifies the dispersive intermolecular interaction near the surface but induces no chemical modification due to their inert nature. On this basis, we have developed a theoretical model consistent with the experimental observations that reproduces the effective Hamaker constant with a reasonable accuracy

Langmuir, Jun 30, 2020

The present study experimentally and numerically investigates the evaporation and resultant patte... more The present study experimentally and numerically investigates the evaporation and resultant patterns of dried deposits of aqueous colloidal sessile droplets, when the droplets are initially elevated to a high temperature before being placed on a substrate held at ambient temperature. The system is then released for natural evaporation without applying any external perturbation. Infrared thermography and optical profilometry were used as essential tools for interfacial temperature measurements and quantification of the coffee-ring dimensions, respectively. Initially, a significant temperature gradient exists along the liquid-gas interface as soon as the droplet is deposited on the substrate which triggers a Marangoni stress-induced recirculation flow directed from the top of the droplet towards the contact line along the liquid-gas interface. Thus, the flow is in the reverse direction to that seen in the conventional substrate heating case. Interestingly, this temperature gradient decays rapidly-within the first 10% of the total evaporation time and the droplet-substrate system reaches thermal equilibrium with ambient thereafter. Despite fast decay of the temperature gradient, the coffee-ring dimensions significantly diminish, leading to an inner deposit. A reduction of 50-70% in the coffee-ring dimensions was recorded by elevating the initial droplet temperature from 25ºC to 75ºC, for suspended particle concentration varying between 0.05% v/v to 1.0% v/v. This suppression of the coffee-ring effect is attributed to the fact that the initial Marangoni stress-induced recirculation flow continues until the last stage of the evaporation, even after the interfacial temperature gradient vanishes. This is essentially a consequence of liquid inertia. Finally, a finite-element based two-dimensional modeling in axisymmetric geometry has been found to capture the measurements with reasonable fidelity and the hypothesis considered in the present study corroborates well with a first approximation qualitative scaling analysis. Overall, together with a new experimental condition, the present investigation discloses a distinct nature of Marangoni stress-induced flow in the drying droplet and its role in influencing the associated colloidal deposits, which was not explored previously. The insights gained from this study are useful to advance technical applications such as spray cooling, ink-jet printing, bioassays, etc.

AIP Advances, Dec 1, 2014

Focused multiple ion beamlets from a microwave plasma source is investigated for localized micron... more Focused multiple ion beamlets from a microwave plasma source is investigated for localized micron-scale modification of substrates in a patterned manner. Plasma electrodes (PE) with an array of through apertures having aperture diameters of the order of plasma Debye length are investigated for generating the beamlets. Extraction through sub-Debye length apertures becomes possible when the PE is kept at floating potential. It is found that the current-voltage characteristics of the extracted beamlets exhibits interesting features such as a space-charge-limited region that has a different behaviour than the conventional Child-Langmuir's law and an extraction-voltage-limited region that does not undergo saturation but exhibits a Schottky-like behaviour similar to that of a vacuum diode. A switching technique to control the motion of individual beamlets is developed and the stopping potential determined. The beamlets are thereafter used to create localized micro-resistive patterns. The experimental results are compared with simulations and reasonably good agreement is obtained.

Transactions of the Indian National Academy of Engineering

N95 mask has emerged as a potential measure to mitigate the airborne transmission of respiratory ... more N95 mask has emerged as a potential measure to mitigate the airborne transmission of respiratory disease such as COVID-19. Herein, we experimentally investigated the impact and interaction of pure water droplets as surrogate to respiratory droplets with the different layers of a commercially available N95 mask to demonstrate the penetration and passage-capability of respiratory fluids through the different layers. The penetration of an impacting droplet through the mask layers was characterized by elucidating the ejection of secondary droplets from the rear-side surface of the target mask material. In addition, the passage of respiratory fluids through the mask layers was characterized by capillary imbibition of the droplet liquid through the pores, as a function of wettability of the mask material. Droplet impact at Weber numbers We = 208 and 416 has been considered in the present study; the chosen We range corresponds to that of cough droplets realized in real respiratory events. Each layer of the N95 mask is hydrophobic that prevents capillary imbibition through the pores: a sessile droplet placed over the surface exhibits classical diffusion-limited evaporation. Droplet impact experiments on N95 mask layer surfaces reveal that a single layer allows liquid penetration at We = 416; while a combination of five layers, as is the case of a commercially available N95 mask, blocks the penetration completely, consistent with the widely known effectiveness of N95 masks. Herein, we devote special attention to compare the so-obtained efficiency of N95 masks to that of a recently designed two-layer cloth mask containing an intermediate High-Efficiency Particulate Air (HEPA) filter layer (Narayan et al. in Phys Fluids 34:061703, 2022). We conclusively show that the performance of the designed cloth mask is identical to that of a commercially available N95 mask. The assessment of mask effectiveness further includes examination of breathability and comfort by means of passage of air through them. A comparative study has been presented herein for a clear demonstration of effectiveness of different masks in preventing airborne transmission of COVID-19.

Physics of Fluids

A face mask is essential personal protective equipment to mitigate the spread of COVID-19. While ... more A face mask is essential personal protective equipment to mitigate the spread of COVID-19. While a cloth mask has the least ability to prevent the passage of infectious respiratory droplets through it compared to surgical and N95 masks, the surgical mask does not fit snugly and causes significant air leakage. The synthetic fibers in the latter reduce comfortability and are an allergen for facial eczema. Moreover, the N95 mask causes CO2 inhalation and reduces heat transfer in the nose. Therefore, the objective of the present work is to improve the effectiveness of a two-layer cloth mask by introducing an intermediate, high-efficiency particulate air (HEPA) filter layer. A significant volume of impacted droplets penetrates through a single-layer cloth mask, ejecting secondary droplets from the rear side. However, a two-layer cloth mask prevents this ejection. Despite slowing down the liquid penetration, capillary imbibition through cloth due to its hydrophilicity causes the transport...

Sādhanā, 2021

We review recent studies on fomite transmission of COVID-19, caused by the novel coronavirus. In ... more We review recent studies on fomite transmission of COVID-19, caused by the novel coronavirus. In particular, we focus on survival time of coronavirus on solid and porous surfaces. Since the aqueous phase of a respiratory droplet serves as a medium for virus survival, evaporation of the droplet on a surface plays a crucial role in determining the virus survival time. While the bulk of the droplet takes a few seconds to evaporate, previous virus titer measurements revealed that the virus can survive for several hours or days on a surface. This long survival of virus has been attributed to a residual thin-liquid film which remains after drying of the bulk droplet. The evaporation of the thin-film is governed by the disjoining pressure within it and therefore, is a much slower process which causes the virus to survive longer. However, the aforesaid disjoining pressure is significantly modulated for the case of porous surfaces due to their typical geometries. This accelerates the thin-film evaporation on porous surfaces and thereby making them lesser susceptible to virus survival. Therefore, porous materials are deemed to be relatively safer for mitigating the spread of COVID-19 via fomite transmission. Using results of the reported research, we briefly discuss the possible recommendations to mitigate the spread of the disease.

Physics of Fluids, 2021

COVID (CoronaVirus Disease)-19, caused by severe acute respiratory syndrome-CoronaVirus-2 (SARS-C... more COVID (CoronaVirus Disease)-19, caused by severe acute respiratory syndrome-CoronaVirus-2 (SARS-CoV-2) virus, predominantly transmits via airborne route, as highlighted by recent studies. Furthermore, recently published titer measurements of SARS-CoV-2 in aerosols have disclosed that the coronavirus can survive for hours. A consolidated knowledge on the physical mechanism and governing rules behind the significantly long survival of coronavirus in aerosols is lacking, which is the subject of the present investigation. We model the evaporation of aerosolized droplets of diameter ≤5 μm. The conventional diffusion-limited evaporation is not valid to model the evaporation of small size (μm–nm) droplets since it predicts drying time on the order of milliseconds. Also, the sedimentation timescale of desiccated droplets is on the order of days and overpredicts the virus survival time; hence, it does not corroborate with the above-mentioned titer-decay timescale. We attribute the virus surv...

Physics of Fluids, 2021

A face shield is an important personal protective equipment to avoid the airborne transmission of... more A face shield is an important personal protective equipment to avoid the airborne transmission of COVID-19. We assess a transparent coating on a face shield that repels airborne respiratory droplets to mitigate the spread of COVID-19. The surface of the available face shield is hydrophilic and exhibits high contact angle hysteresis. The impacting droplets stick on it, resulting in an enhanced risk of fomite transmission of the disease. Further, it may get wetted in the rain, and moisture may condense on it in the presence of large humidity, which may blur the user's vision. Therefore, the present study aims to improve the effectiveness of a face shield. Our measurements demonstrate that the face shield, coated by silica nanoparticles solution, becomes superhydrophobic and results in a nominal hysteresis to the underlying surface. We employ high-speed visualization to record the impact dynamics of microliter droplets with a varying impact velocity and angle of attack on coated an...

Industrial & Engineering Chemistry Research, May 18, 2023

Sadhana-academy Proceedings in Engineering Sciences, Feb 27, 2023

Journal of Applied Physics, Mar 28, 2017

Mass spectrometric investigations of plasma chemical reactions in a radiofrequency discharge with... more Mass spectrometric investigations of plasma chemical reactions in a radiofrequency discharge with Ar/C2H2 and Ar/C2H2/O2 gas mixtures

Sadhana-academy Proceedings in Engineering Sciences, Dec 14, 2021

We review recent studies on fomite transmission of COVID-19, caused by the novel coronavirus. In ... more We review recent studies on fomite transmission of COVID-19, caused by the novel coronavirus. In particular, we focus on survival time of coronavirus on solid and porous surfaces. Since the aqueous phase of a respiratory droplet serves as a medium for virus survival, evaporation of the droplet on a surface plays a crucial role in determining the virus survival time. While the bulk of the droplet takes a few seconds to evaporate, previous virus titer measurements revealed that the virus can survive for several hours or days on a surface. This long survival of virus has been attributed to a residual thin-liquid film which remains after drying of the bulk droplet. The evaporation of the thin-film is governed by the disjoining pressure within it and therefore, is a much slower process which causes the virus to survive longer. However, the aforesaid disjoining pressure is significantly modulated for the case of porous surfaces due to their typical geometries. This accelerates the thin-film evaporation on porous surfaces and thereby making them lesser susceptible to virus survival. Therefore, porous materials are deemed to be relatively safer for mitigating the spread of COVID-19 via fomite transmission. Using results of the reported research, we briefly discuss the possible recommendations to mitigate the spread of the disease.

Mechanical engineering series, 2020

Frontiers in Physics, Feb 24, 2015

In-Cell (PIC) simulations are carried out to investigate the effect of discharge length (L) and p... more In-Cell (PIC) simulations are carried out to investigate the effect of discharge length (L) and pressure (p) on Electron Energy Probability Function (EEPF) in a low pressure radio frequency (rf) inductively coupled plasma (ICP) at 13.56 MHz. It is found that for both cases of varying L (0.1-0.5 m) and p (1-10 mTorr), the EEPF is a bi-Maxwellian with a step in the bounded direction (x) and non-Maxwellian with a hot tail in the symmetric unbounded directions (y, z). The plasma space potential decreases with increase in both L and p, the trapped electrons having energies in the range 0-20 eV. In a conventional discharge bounded in all directions, we infer that L and p are similarity parameters for low energy electrons trapped in the bulk plasma that have energies below the plasma space potential (eV p). The simulation results are consistent with a particle balance model.

Physics of Fluids, May 1, 2021

Paper published as part of the special topic on Flow and the Virus This paper was selected as Fea... more Paper published as part of the special topic on Flow and the Virus This paper was selected as Featured ARTICLES YOU MAY BE INTERESTED IN Why coronavirus survives longer on impermeable than porous surfaces

Physics of Fluids, Feb 1, 2021

Paper published as part of the special topic on Flow and the Virus This paper was selected as Fea... more Paper published as part of the special topic on Flow and the Virus This paper was selected as Featured ARTICLES YOU MAY BE INTERESTED IN How coronavirus survives for days on surfaces

EPL, Jun 1, 2017

We present the effect of 0.5 keV Ar+ beam irradiation on the wetting properties of metallic thin ... more We present the effect of 0.5 keV Ar+ beam irradiation on the wetting properties of metallic thin films. Observations reveal a transition from hydrophilic to hydrophobic nature at higher beam fluences which can be attributed to a reduction in net surface free energy. In this low-energy regime, ion beams do not induce significant surface roughness and chemical heterogeneity. However, they cause implantation of atomic impurities in the near surface region of the target and thus form a heterogeneous system at atomic length scales. Interestingly, the presence of implanted Ar atoms in the near surface region modifies the dispersive intermolecular interaction near the surface but induces no chemical modification due to their inert nature. On this basis, we have developed a theoretical model consistent with the experimental observations that reproduces the effective Hamaker constant with a reasonable accuracy

Langmuir, Jun 30, 2020

The present study experimentally and numerically investigates the evaporation and resultant patte... more The present study experimentally and numerically investigates the evaporation and resultant patterns of dried deposits of aqueous colloidal sessile droplets, when the droplets are initially elevated to a high temperature before being placed on a substrate held at ambient temperature. The system is then released for natural evaporation without applying any external perturbation. Infrared thermography and optical profilometry were used as essential tools for interfacial temperature measurements and quantification of the coffee-ring dimensions, respectively. Initially, a significant temperature gradient exists along the liquid-gas interface as soon as the droplet is deposited on the substrate which triggers a Marangoni stress-induced recirculation flow directed from the top of the droplet towards the contact line along the liquid-gas interface. Thus, the flow is in the reverse direction to that seen in the conventional substrate heating case. Interestingly, this temperature gradient decays rapidly-within the first 10% of the total evaporation time and the droplet-substrate system reaches thermal equilibrium with ambient thereafter. Despite fast decay of the temperature gradient, the coffee-ring dimensions significantly diminish, leading to an inner deposit. A reduction of 50-70% in the coffee-ring dimensions was recorded by elevating the initial droplet temperature from 25ºC to 75ºC, for suspended particle concentration varying between 0.05% v/v to 1.0% v/v. This suppression of the coffee-ring effect is attributed to the fact that the initial Marangoni stress-induced recirculation flow continues until the last stage of the evaporation, even after the interfacial temperature gradient vanishes. This is essentially a consequence of liquid inertia. Finally, a finite-element based two-dimensional modeling in axisymmetric geometry has been found to capture the measurements with reasonable fidelity and the hypothesis considered in the present study corroborates well with a first approximation qualitative scaling analysis. Overall, together with a new experimental condition, the present investigation discloses a distinct nature of Marangoni stress-induced flow in the drying droplet and its role in influencing the associated colloidal deposits, which was not explored previously. The insights gained from this study are useful to advance technical applications such as spray cooling, ink-jet printing, bioassays, etc.

AIP Advances, Dec 1, 2014

Focused multiple ion beamlets from a microwave plasma source is investigated for localized micron... more Focused multiple ion beamlets from a microwave plasma source is investigated for localized micron-scale modification of substrates in a patterned manner. Plasma electrodes (PE) with an array of through apertures having aperture diameters of the order of plasma Debye length are investigated for generating the beamlets. Extraction through sub-Debye length apertures becomes possible when the PE is kept at floating potential. It is found that the current-voltage characteristics of the extracted beamlets exhibits interesting features such as a space-charge-limited region that has a different behaviour than the conventional Child-Langmuir's law and an extraction-voltage-limited region that does not undergo saturation but exhibits a Schottky-like behaviour similar to that of a vacuum diode. A switching technique to control the motion of individual beamlets is developed and the stopping potential determined. The beamlets are thereafter used to create localized micro-resistive patterns. The experimental results are compared with simulations and reasonably good agreement is obtained.

Transactions of the Indian National Academy of Engineering

N95 mask has emerged as a potential measure to mitigate the airborne transmission of respiratory ... more N95 mask has emerged as a potential measure to mitigate the airborne transmission of respiratory disease such as COVID-19. Herein, we experimentally investigated the impact and interaction of pure water droplets as surrogate to respiratory droplets with the different layers of a commercially available N95 mask to demonstrate the penetration and passage-capability of respiratory fluids through the different layers. The penetration of an impacting droplet through the mask layers was characterized by elucidating the ejection of secondary droplets from the rear-side surface of the target mask material. In addition, the passage of respiratory fluids through the mask layers was characterized by capillary imbibition of the droplet liquid through the pores, as a function of wettability of the mask material. Droplet impact at Weber numbers We = 208 and 416 has been considered in the present study; the chosen We range corresponds to that of cough droplets realized in real respiratory events. Each layer of the N95 mask is hydrophobic that prevents capillary imbibition through the pores: a sessile droplet placed over the surface exhibits classical diffusion-limited evaporation. Droplet impact experiments on N95 mask layer surfaces reveal that a single layer allows liquid penetration at We = 416; while a combination of five layers, as is the case of a commercially available N95 mask, blocks the penetration completely, consistent with the widely known effectiveness of N95 masks. Herein, we devote special attention to compare the so-obtained efficiency of N95 masks to that of a recently designed two-layer cloth mask containing an intermediate High-Efficiency Particulate Air (HEPA) filter layer (Narayan et al. in Phys Fluids 34:061703, 2022). We conclusively show that the performance of the designed cloth mask is identical to that of a commercially available N95 mask. The assessment of mask effectiveness further includes examination of breathability and comfort by means of passage of air through them. A comparative study has been presented herein for a clear demonstration of effectiveness of different masks in preventing airborne transmission of COVID-19.

Physics of Fluids

A face mask is essential personal protective equipment to mitigate the spread of COVID-19. While ... more A face mask is essential personal protective equipment to mitigate the spread of COVID-19. While a cloth mask has the least ability to prevent the passage of infectious respiratory droplets through it compared to surgical and N95 masks, the surgical mask does not fit snugly and causes significant air leakage. The synthetic fibers in the latter reduce comfortability and are an allergen for facial eczema. Moreover, the N95 mask causes CO2 inhalation and reduces heat transfer in the nose. Therefore, the objective of the present work is to improve the effectiveness of a two-layer cloth mask by introducing an intermediate, high-efficiency particulate air (HEPA) filter layer. A significant volume of impacted droplets penetrates through a single-layer cloth mask, ejecting secondary droplets from the rear side. However, a two-layer cloth mask prevents this ejection. Despite slowing down the liquid penetration, capillary imbibition through cloth due to its hydrophilicity causes the transport...

Sādhanā, 2021

We review recent studies on fomite transmission of COVID-19, caused by the novel coronavirus. In ... more We review recent studies on fomite transmission of COVID-19, caused by the novel coronavirus. In particular, we focus on survival time of coronavirus on solid and porous surfaces. Since the aqueous phase of a respiratory droplet serves as a medium for virus survival, evaporation of the droplet on a surface plays a crucial role in determining the virus survival time. While the bulk of the droplet takes a few seconds to evaporate, previous virus titer measurements revealed that the virus can survive for several hours or days on a surface. This long survival of virus has been attributed to a residual thin-liquid film which remains after drying of the bulk droplet. The evaporation of the thin-film is governed by the disjoining pressure within it and therefore, is a much slower process which causes the virus to survive longer. However, the aforesaid disjoining pressure is significantly modulated for the case of porous surfaces due to their typical geometries. This accelerates the thin-film evaporation on porous surfaces and thereby making them lesser susceptible to virus survival. Therefore, porous materials are deemed to be relatively safer for mitigating the spread of COVID-19 via fomite transmission. Using results of the reported research, we briefly discuss the possible recommendations to mitigate the spread of the disease.

Physics of Fluids, 2021

COVID (CoronaVirus Disease)-19, caused by severe acute respiratory syndrome-CoronaVirus-2 (SARS-C... more COVID (CoronaVirus Disease)-19, caused by severe acute respiratory syndrome-CoronaVirus-2 (SARS-CoV-2) virus, predominantly transmits via airborne route, as highlighted by recent studies. Furthermore, recently published titer measurements of SARS-CoV-2 in aerosols have disclosed that the coronavirus can survive for hours. A consolidated knowledge on the physical mechanism and governing rules behind the significantly long survival of coronavirus in aerosols is lacking, which is the subject of the present investigation. We model the evaporation of aerosolized droplets of diameter ≤5 μm. The conventional diffusion-limited evaporation is not valid to model the evaporation of small size (μm–nm) droplets since it predicts drying time on the order of milliseconds. Also, the sedimentation timescale of desiccated droplets is on the order of days and overpredicts the virus survival time; hence, it does not corroborate with the above-mentioned titer-decay timescale. We attribute the virus surv...

Physics of Fluids, 2021

A face shield is an important personal protective equipment to avoid the airborne transmission of... more A face shield is an important personal protective equipment to avoid the airborne transmission of COVID-19. We assess a transparent coating on a face shield that repels airborne respiratory droplets to mitigate the spread of COVID-19. The surface of the available face shield is hydrophilic and exhibits high contact angle hysteresis. The impacting droplets stick on it, resulting in an enhanced risk of fomite transmission of the disease. Further, it may get wetted in the rain, and moisture may condense on it in the presence of large humidity, which may blur the user's vision. Therefore, the present study aims to improve the effectiveness of a face shield. Our measurements demonstrate that the face shield, coated by silica nanoparticles solution, becomes superhydrophobic and results in a nominal hysteresis to the underlying surface. We employ high-speed visualization to record the impact dynamics of microliter droplets with a varying impact velocity and angle of attack on coated an...