Fit, Precision, and Trueness of 3D-Printed Zirconia Crowns Compared to Milled Counterparts (original) (raw)

Accuracy, adaptation and margin quality of monolithic zirconia crowns fabricated by 3D printing versus subtractive manufacturing technique: A systematic review and meta-analysis of in vitro studies.

BMC Oral Health

View PDFchevron_right

Marginal gap and internal fit of 3D printed versus milled monolithic zirconia crowns

Lamia Singer

BMC Oral Health

View PDFchevron_right

A Comparative Evaluation of the Marginal and Internal Fit of Laboratory-fabricated Monolithic Zirconia Crowns using Direct and Indirect Methods of Scanning: An in vitro Study

Sabita M Ram

Journal of Contemporary Dentistry, 2017

View PDFchevron_right

Comparing of Marginal and internal fit of Monolithic Zircon crown Fabricated by 3D Printed Die versus Conventional

Amany Korsel

Egyptian Dental Journal, 2018

View PDFchevron_right

Marginal and Internal Fitness of Full Contour CAD/CAM Fabricated Zirconia Crowns using Different Digital Intra-oral Scanners (An In vitro Study)

Adel Ibraheem

Journal of Pure and Applied Microbiology, 2018

View PDFchevron_right

In Vitro Microscopic Evaluation of Metal- And Zirconium-Oxide-Based Crowns’ Marginal Fit

anand Marya

Pesquisa Brasileira em Odontopediatria e Clínica Integrada, 2022

View PDFchevron_right

In vitro Evaluation of the Marginal Fit and Internal Adaptation of Zirconia and Lithium Disilicate Single Crowns: Micro-CT Comparison Between Different Manufacturing Procedures

massimo amato

The Open Dentistry Journal, 2018

View PDFchevron_right

A comparative evaluation of marginal fit of all ceramic crowns fabricated with zirconia cored crowns and monolithic crowns – An in vitro study

Amuthavalli Sargunan, Shivasakthy Manivasakan

Journal of Advanced Clinical & Research Insights, 2020

View PDFchevron_right

Randomized controlled clinical trial of digital and conventional workflows for the fabrication of zirconia-ceramic fixed partial dentures. Part III: Marginal and internal fit.

Mutlu Özcan

View PDFchevron_right

Marginal adaptation of CAD/CAM zirconia-based crown during fabrication steps

Amany Korsel

Tanta Dental Journal, 2015

View PDFchevron_right

Evaluation of the marginal fit of a zirconia ceramic computer-aided machined (CAM) crown system

rustum baig

The Journal of Prosthetic Dentistry, 2010

View PDFchevron_right

Clinical Outcomes of Monolithic Zirconia Crowns with CAD/CAM Technology. A 1-Year Follow-Up Prospective Clinical Study of 65 Patients

Miltiadis Mitsias

International Journal of Environmental Research and Public Health

View PDFchevron_right

(In-Vitro Comparison between Closed Versus Open CAD/CAM Systems) Comparison between Closed and Open CAD/CAM Systems by Evaluating the Marginal Fit of Zirconia-Reinforced Lithium Silicate Ceramic Crowns

eran dolev

Applied Sciences, 2021

View PDFchevron_right

Analysis of the marginal adaptation of different crowns fabricated with computer-aided technology using an intraoral digital scanner

Emilena Lima

Brazilian Journal of Oral Sciences, 2020

View PDFchevron_right

Evaluation of the Marginal Adaptability of Indirect Composite and Monolithic Zirconia Crowns - A Stereomicroscopic Analysis

Texila International Journal

Texila International Journal of Public Health, 2024

View PDFchevron_right

An in vitro comparison of the marginal and internal adaptation of ultrathin occlusal veneers made of 3D-printed zirconia, milled zirconia, and heat-pressed lithium disilicate.

Mutlu Özcan

View PDFchevron_right

The assessment of the precision (marginal and internal) of 3D printing and milled interim crowns

aliaa mahrous

Egyptian Dental Journal

View PDFchevron_right

A 3 years retrospective study of survival for zirconia-based single crowns fabricated from intraoral digital impressions

Enrico Gherlone

Journal of dentistry, 2014

View PDFchevron_right

The effect of cyclic loading on the fracture resistance of 3D-printed and CAD/CAM milled zirconia crowns-an in vitro study

Ahmed Fouda

Clinical Oral Investigations, 2023

View PDFchevron_right

Effect of Horizontal Resolution of Printer on Trueness of 3D-Printed Provisional Crown: An In Vitro Study

Anh Nguyễn

European Journal of General Dentistry, 2023

View PDFchevron_right

Comparison of the marginal fit of milled yttrium stabilized zirconium dioxide crowns obtained by scanning silicone impressions and by scanning stone replicas

Josep Maria Anglada Cantarell

The Journal of Advanced Prosthodontics, 2018

View PDFchevron_right

The Fracture Resistance of Additively Manufactured Monolithic Zirconia vs. Bi-Layered Alumina Toughened Zirconia Crowns When Cemented to Zirconia Abutments. Evaluating the Potential of 3D Printing of Ceramic Crowns: An In Vitro Study

leila nasiry khanlar

Dentistry Journal

View PDFchevron_right

A Comparative Evaluation of Marginal Fit of Crowns Fabricated by Three All Ceramic CAD-CAM Systems Using Their Respective Scanners - An in vitro study

Sabita M Ram

Journal of Contemporary Dentistry, 2012

View PDFchevron_right

Marginal and internal fit of zirconia based fixed dental prostheses fabricated with different concepts

john sorensen

Clinical, Cosmetic and Investigational Dentistry, 2010

View PDFchevron_right

The Clinical Potential of 3D-Printed Crowns Reinforced with Zirconia and Glass Silica Microfillers

Abdullah Alshamrani

Journal of Functional Biomaterials

View PDFchevron_right

An In-Vitro Comparative Study on the Marginal Adaptation of Metal Ceramic Crowns and Zirconium Dioxide Crowns with Rounded Shoulder Finish Line Preparation

IOSR Journals

View PDFchevron_right

Adaptation of zirconia crowns created by conventional versus optical impression: in vitro study

ramin atash

The Journal of Advanced Prosthodontics

View PDFchevron_right

Influence of preparation angle on marginal and internal fit of CAD/CAM-fabricated zirconia crown copings

Florian Beuer

Quintessence International, 2009

View PDFchevron_right

Internal Adaptation of Implant-Supported, Polymer-Infused Ceramic Crowns Fabricated by Two CAD/CAM Systems

Reem Talic

Journal of Prosthodontics, 2018

View PDFchevron_right

Effect of Sintering Time on The Marginal and Internal Fit of Monolithic Zirconia Crowns Containing 3-4 Mol% Y2O3

Barış Güncü

2021

View PDFchevron_right

Fit, Precision, and Trueness of 3D-Printed Zirconia Crowns Compared to Milled Counterparts (original) (raw)

Related papers