The Effect of Zn-Substitution on the Morphological, Magnetic, Cytotoxic, and In Vitro Hyperthermia Properties of Polyhedral Ferrite Magnetic Nanoparticles (original) (raw)
Related papers
Nanomaterials
Manganese and zinc ferrite magnetic nanoparticles (MNPs) were successfully synthesizedusing the polyol method in ethylene glycol and were found to have high saturation magnetizationvalues (90–95 emu/g at 4 K) when formed by ~30-nm crystallites assembled in an ~80-nm multicorestructure. Hyperthermia data revealed a sigmoidal dependence of the specific absorption rate (SAR)on the alternating magnetic field (AMF) amplitude, with remarkable saturation SAR values in waterof ~1200 W/gFe+Mn and ~800 W/gFe+Zn for the Mn and Zn ferrites, respectively. The immobilizationof the MNPs in a solid matrix reduced the maximum SAR values by ~300 W/gFe+Mn, Zn for bothferrites. The alignment of the MNPs in a uniform static magnetic field, before their immobilizationin a solid matrix, significantly increased their heating performance. Toxicity assays performed infour cell lines revealed a lower toxicity for the Mn ferrites, while in the case of the Zn ferrites, only~50% of cells were viable upon their i...
In-vitro application of Mn-ferrite nanoparticles as novel magnetic hyperthermia agents
Journal of Materials Chemistry B 2 8390 (2014)
Manganese ferrite nanoparticles were synthesized by a facile, low-cost, environmentally friendly and high yield methodology based on the aqueous co-precipitation of proper salts. Firstly, structural, morphological and magnetic characterization schemes were performed to dete rmine crucial factors for optimizing their heating potential, such as size, polydispersity, saturation magnetization and coercivity. In an effort to simulate the in vivo environment of animal tissue phantoms and study the thermal heating effects resulting from Brownian motion and hysteresis losses, nanoparticles at various concentrations were embedded in aqueous media of varying agar concentration. During the in vitro application healthy cells (primary bone marrow-derived osteoblasts and 3T3-L1 fibroblast-like preadipocytes) and human osteosarcoma Saos-2 cells, were incubated with manganese ferrite nanoparticles. The heating profile of the particles was studied in different concentrations and in correlation with their potential cytotoxic effect. Our results revealed concentration dependent cytotoxicity profile and uptake efficiency together with variable specific loss power values yet with fast thermal response, opening novel pathways in material selection as hyperthermia agents.
Chemistry of Materials, 2010
Stoichiometric Mn 0.2 Zn 0.8 Fe 2 O 4 monodisperse nanoparticles were prepared by the so-called polyol method. The variation of magnetization as a function of magnetic field H (up to (50 kOe) and temperature (5-320 K) were investigated, for zero-field-cooled (ZFC) and field-cooled (FC) conditions on freshly produced powder. The T variation of the low-field (H = 200 Oe) magnetic susceptibility is characteristic of superparamagnets with a blocking temperature below room temperature. The H variation of the low temperature (T = 5 K) magnetization exhibits a hysteresis loop. The coercivity is weak, about 0.2-0.3 kOe, which is typical of soft-ferrimagnetic materials. The 0 K saturation magnetization and the Curie temperature are found to be 98 emu.g-1 and 360 K, respectively. The magnetic properties of the particles are discussed in relation with their chemical composition and their cation distribution in the opportunity of using them as heating mediators for hyperthermia application in cancer therapy. In this aim, the toxicity of the particles was also evaluated by viability assays on human umbilical vein endothelial cells (HUVEC).
Pharmaceutics
We report the synthesis of magnetite nanoparticles (IOMNPs) using the polyol method performed at elevated temperature (300 °C) and high pressure. The ferromagnetic polyhedral IOMNPs exhibited high saturation magnetizations at room temperature (83 emu/g) and a maximum specific absorption rate (SAR) of 2400 W/gFe in water. The uniform dispersion of IOMNPs in solid matrix led to a monotonous increase of SAR maximum (3600 W/gFe) as the concentration decreased. Cytotoxicity studies on two cell lines (cancer and normal) using Alamar Blues and Neutral Red assays revealed insignificant toxicity of the IOMNPs on the cells up to a concentration of 1000 μg/mL. The cells internalized the IOMNPs inside lysosomes in a dose-dependent manner, with higher amounts of IOMNPs in cancer cells. Intracellular hyperthermia experiments revealed a significant increase in the macroscopic temperatures of the IOMNPs loaded cell suspensions, which depend on the amount of internalized IOMNPs and the alternating m...
Journal of Materials Science: Materials in Medicine, 2015
Superparamagnetic nanoferrites are prepared by simple and one step refluxing in polyol synthesis. The ferrite nanoparticles prepared by this method exhibit particle sizes below 10 nm and high degree of crystallinity. These ferrite nanoparticles are compared by means of their magnetic properties, induction heating and cell viability studies for its application in magnetic fluid hyperthermia. Out of all studied nanoparticles in present work, only ZnFe 2 O 4 and CoFe 2 O 4 MNPs are able to produce threshold hyperthermia temperature. This rise in temperature is discussed in detail in view of their magneto-structural properties. Therefore ZnFe 2 O 4 and CoFe 2 O 4 MNPs with improved stability, magnetic induction heating and cell viability are suitable candidates for magnetic hyperthermia.
Magnetic Nanoparticles as Mediators for Magnetic Hyperthermia Therapy Applications: A Status Review
Applied Sciences
This concise review delves into the realm of superparamagnetic nanoparticles, specifically focusing on Fe2O3, Mg1+xFe2−2xTixO4, Ni1−xCux, and CrxNi1−x, along with their synthesis methods and applications in magnetic hyperthermia. Remarkable advancements have been made in controlling the size and shape of these nanoparticles, achieved through various synthesis techniques such as coprecipitation, mechanical milling, microemulsion, and sol–gel synthesis. Through this review, our objective is to present the outcomes of diverse synthesis methods, the surface treatment of superparamagnetic nanoparticles, their magnetic properties, and Curie temperature, and elucidate their impact on heating efficiency when subjected to high-frequency magnetic fields.
Recent progress on magnetic nanoparticles for magnetic hyperthermia
Progress in Biomaterials, 2016
Recent advances in nanomaterials science contributed to develop new micro-and nano-devices as potential diagnostic and therapeutic tools in the field of oncology. The synthesis of superparamagnetic nanoparticles (SPMNPs) has been intensively studied, and the use of these particles in magnetic hyperthermia therapy has demonstrated successes in treatment of cancer. However, some physical limitations have been found to impact the heating efficiency required to kill cancer cells. Moreover, the bio-safety of NPs remains largely unexplored. The primary goals of this review are to summarize the recent progress in the development of magnetic nanoparticles (MNPs) for hyperthermia, and discuss the limitations and advances in the synthesis of these particles. Based on this knowledge, new perspectives on development of new biocompatible and biofunctional nanomaterials for magnetic hyperthermia are discussed.