Effects of Temperature Variation on the Cutting Edge Hardness of Selected HSS and HCS Single Point Cutting Tools (original) (raw)
Related papers
"Influence of Hardening Process Over Modified Heat- Treated Carbon Steel Cutting Tool Materials"
Journal of Scholastic Engineering Science and Publication, 2021
In this research work, we have found that tool wear rate of the materials of high-speed steel and Titanium alloy which are having optimum composition of carbon and other constituents. Here we have expounded the distinguishing characteristics of high-speed steel and Titanium alloys in respect to the tool wear. Subsequently, we have carried out heat treatment process, where two machined specimens were kept inside the muffle furnace once it attained required temperature, it was maintained at that temperature for a certain period of time and then cooled back to room temperature, we have conducted hardness test, tool wear test. In addition to these cutting operations have performed over mild steel and aluminum workpiece.
AIP Conference Proceedings
Carburization is one the best heat treatment that responded well to hardening with Palm Kernel Shell giving the best hardness value. This work studied the influence of carburization on HSStool(ASTM A600) and its behaviour during machining of mild steel (ASTM A36). Composition of the samples (12 pieces of 180 x 12 x12 mm) HSS tools were checked using UV-VIS spectrometer and the tools were carburized with PKS at holding temperatures and time of 800, 850, 900,950 o C and 60,90 120 minutes using muffle furnance. The micro structural analysis, surface and core hardnessof the treated samples gave better results than the untreated samples when checked withsoft driven and optical microscope. It wasalso observed that increase in the feed rate and depth for length of cut of 50 mm significantly reduces the wear progression and thereby gave best machining time at maximum carburizing temperature and time(950 o C / 120 minutes) when it was used to cut mild steelon the lathe machine.
In this study, it is aimed to investigate the surface roughness of cutting tools during the machining of AISI 304 stainless steels, the life of cutting tools and the cutting forces that occur during cutting and machining. The main features of stainless steels are: high corrosion resistance, ductility and high tensile strength. Stainless steels contain elements such as chromium, nickel and molybdenum which affect the machinability in the negative direction; therefore it is very difficult to process stainless steels. This work was carried out using covered cutting tools. The work was carried out at different cutting depths and different feed rates without the use of cooling liquid. The life and wear mechanisms of cutting tools, cutting forces and surface roughness were investigated in relation to cutting parameters.
"Impact of thermal treatment process over carbon based single point cutting tool" Syed Mehaboob
JSESM, 2021
In this research work, we have found that tool wear rate of the materials of high-speed steel and Stainless steel of 440C Grade which are having optimum composition of carbon and other constituents. Here we have expounded the distinguishing characteristics of high-speed steel and Stainless Steel in respect to the tool wear. Subsequently, we have carried out heat treatment process, where two machined specimens were kept inside the muffle furnace once it attained required temperature, it was maintained at that temperature for a certain period of time and then cooled back to room temperature, we have conducted hardness test, tool wear test. In addition to these cutting operations have performed over mild steel workpiece.
Turning is a machining process in which a cutting tool, typically a non-rotary tool bit, describes a helix toolpath by moving more or less linearly while the workpiece rotates.Machining of High Carbon High Chromium steel (HCHCr) is a challenge for production engineers in tool industry. In this research paper, a study on turning HCHCr Steel using tungsten carbide tool inserts is made by varying depth of cut, the cutting and feed rate speed one each at a time and keeping other two constant. The effect on process parameters like surface finish, material removal rate, tool wear, Cutting force, thrust force and temperature distribution on tool tip are discussed. Organised by: ATME College of Engineering, Mysuru, INDIA © 2020, IRJET | Impact Factor value: 7.529 | ISO 9001:2008 Certified Journal | Page 12
An experimental investigation of hot-machining to predict tool life
Journal of Materials Processing Technology, 2008
An experimental investigation had been carried out for hot-machining operation of high manganese steel using a carbide cutting tool. The heating of the work-piece was carried out by burning a mixture of liquid petroleum gas and oxygen. An expression of tool life as a function of cutting speed, feed, depth of cut and temperature was developed using regression analysis. The adequacy of the model was tested. The effects of cutting conditions on tool life were also investigated.
In today's global market economy, producers have to produce high quality, low cost and more functional products as soon as possible in order to enable their assets to survive. One of the main factors in producing this high quality, low cost and functional product is the machinability factor. Work on the machinability of materials has been continuing with great acceleration in recent years. As a matter of fact, these studies provide not only the machinability but also the development of tool life and surface quality, and the formation of new material types. For this purpose, Korkut et al. (2004) studied AISI 304 stainless steels at different cutting speeds at constant cutting depth. At the end of the study, the increase of the cutting speed to a certain value causes the decrease of tool wear; but the increase in cutting speed after a certain value has increased the tool wear. (Korkut, Kasap et al., 2004) .Bh et al., in their work, have investigated the workability of AISI D3 hardened steel materials. The work was carried out using ceramic cutting tool without using cooling liquid. The effects of cutting parameters such as cutting speed, feed rate and cutting depth on tool wear and surface roughness were investigated. Three different cutting speeds, 3 different cutting depths and 3 different feed rates were used in the study, and the most important parameter on tool wear was cut depth (Varaprasad.Bh, Rao.Ch et al.) Wagh S.S. et al. have examined the machinability of AISI 304 stainless steels in their work. PVD plated carbide tool was used in the study. The cutting force and surface roughness and cutting temperature obtained during operation are measured. It has been determined that cutting force and surface roughness increase with the increase in working rate (Wagh, Kulkarni et al., 2013). Xavior M. A. et al.have investigated the effect of cooling liquid usage on surface roughness and tool wear during the machining of AISI 304 stainless steels. In the study, coconut oil was compared with 2 different cooling liquids. It has been determined that the use of cooling fluid in the work reduces surface roughness and tool wear. Coconut oil has been reported to provide more surface roughness and less tool wear than the other two cooling fluids used (Xavior and Adithan 2009). Debnath S. et al.have investigated the effects of different grades of cooling fluid and cutting parameters on surface roughness and tool wear. The study was carried out with a TiCN + Al2O3 + TiN plated tool on a CNC lathe using mild steel. It is stated that the parametres affecting the surface roughness are the rate of advancement and the most effective parameters in tool wear are cutting speed and cutting depth. It has been reported Abstract— In this work using AISI 304 non-corroding steel, the determination of the optimum cutting speeds from the machining parameters for cutting force, surface roughness, tool life and tool wear has been investigated. For this purpose, sawing operations have been carried out at low and high cutting speeds. Stainless steels contain elements such as chromium, nickel, and molybdenum added to the structure in order to impart different properties. Stainless steels have high corrosion resistance, ductility and tensile strength. Because of these features, defense industry is used intensively. The additional elements in the structure are those that affect the workability in the negative direction. Therefore, it is very difficult to process stainless steels. This work was carried out using a covered cutting tool without using cooling liquid at different cutting speeds. At the end of the study, tool life, tool wear, surface roughness and cutting forces were experimentally determined. The effect of cutting speed on cutting tool and machinability is examined.
Investigation on Cutting Temperature and Tool-Wear and Comparing Them with Fem Results
tmt.unze.ba
Finite element modeling (FEM) of machining is a widely applied way to get information about the phenomena occurring during the cutting process. However, the results have to be validated by real data collected by cutting experiments. We have realized a machining experiment focusing on temperature and tool-wear. The paper introduces some results and compares them with the FEM outcomes.
Influence of Hot Forging and Heat Treatment on Mechanical Properties of D-Series Cutting Tools
Journal of Mines, Metals and Fuels, 2022
In this experimental work D2 and D3 type cutting tool samples have hot forged and heat treated. The belt a drop hammer of weight 500N was employed to press forge the selected steel tool materials. In the forging operation the materials were heated to 1100 o C-1200 o C. The structures of hot forged and heat treated tool samples were observed through metallurgical microscope. The hardness and impact strength of the tool materials were studied using Vickers micro hardness tester and Charpy impact testing machine. The wear resistance of the tool materials was assessed using pin on disc wear tester at constant sliding speed (1.675m/s) and sliding distance (1005m) at room temperature condition. The hardness, impact strength and wear resistance of the 20% forged and heat treated D2 tool and D3 tool materials were found comparatively better and the same was discussed under the background of microstructural changes.
Logic : Jurnal Rancang Bangun dan Teknologi, 2020
The hard facing process is the welding process of SMAW by using a hard facing DIN 888 electrode as a hard facing to replace conventional cutting tool material. The purpose of this analysis is to determine the effect of preheating temperature on the welding of hard coatings on AISI A35 low carbon steel. The results of this study are expected to obtain optimum hardness on coated steel, from variations in the temperature of the preheating. there will be a change in the hardness of the welding deposit, the deposit will be used as cutting tools. The results of this study can be used as guidelines for making cutting tools.