A review of band assignments in near infrared spectra of wood and wood components (original) (raw)
Related papers
Assessing Trees, Wood and Derived Products with near Infrared Spectroscopy: Hints and Tips
Journal of Near Infrared Spectroscopy, 2016
Wood is a renewable and valuable resource for a variety of end-use application areas. However, rapid and reliable assessments are needed to identify the quality of the tree, timber or wood product at all stages of production and processing. The ideal technology for assessing wood and wood products must provide reliable data, be user-friendly, cost-competitive and provide a rapid analysis. The ultimate application of near infrared (NIR) spectroscopy of wood or wood products is to substitute for costly and time-consuming reference measurements in order to aid process optimisation or determine properties and genetic traits on large numbers of individual samples. Increased interest in the application of NIR spectroscopy in various research fields including wood is observed nowadays. A vast number of publications highlight the potential of NIR spectroscopy for the characterisation of wood in a broad area of uses. The Journal of Near Infrared Spectroscopy has published two special issues ...
Maderas. Ciencia y tecnología, 2018
The modification of wood by thermal treatments produces characteristic changes in its chemical composition and surface color and can improve the structural and esthetic quality. The objective of this paper is to evaluate the potential of near infrared and visible spectroscopy to predict the modifications in chemical composition of Eucalyptys grandis and Pinus taeda after thermal treatment. Near infrared and visible spectra were collected directly on the longitudinal surface of wood samples. The thermally modified wood of both species showed higher content of lignin and extractives than the untreated wood. There was darkening of thermally modified wood, as a result of chemical modification caused by heat. The Near infrared/visible technique identified the groups that were modified by treatment. NIR and visible spectroscopy can be used to predict chemical composition of natural or thermally treated Eucalyptus grandis and Pinus taeda.
Challenges in the use of Near Infrared Spectroscopy for improving wood quality: A review
Forest Systems
Aims of study: Forestry-related companies require quality monitoring methods capable to pass a large number of samples. This review paper is dealing with the utilization of near infrared (NIR) technique for wood analysis.Area of study: We have a global point of view for NIR applications and characterization of different kind of wood species is considered.Material and methods: NIR spectroscopy is a fast, non-destructive technique, applicable to any biological material, demanding little or no sample preparation. NIR spectroscopy and multivariate analysis serve well in laboratories where the conditions are controlled. The main challenges to NIR spectroscopy technique in field conditions are moisture content and portability.Results: In this review, the methods and challenges for successfully applying NIR spectroscopy in the field of wood characterization are presented. Portable equipment need to record NIR spectra with low noise and low sensitivity to temperature and humidity variations...
Comparison of Methods for Estimating Mechanical Properties of Wood by NIR Spectroscopy
Journal of Spectroscopy, 2018
Near-infrared (NIR) spectroscopy provides a rapid alternative to traditional methods of wood property assessment. For organizations who assess wood properties on a large scale, multisite, multispecies calibrations are of practical interest. We examined NIR spectroscopy for the estimation of density (at 12% moisture content), modulus of elasticity (MOE), and modulus of rupture (MOR) using clear wood samples obtained from several pine species (Pinus caribaeavar. bahamensis, var.hondurensis, and var. caribaea, P.chiapensis,P.maximinoi,P.oocarpa,P.taeda, andP.tecunumanii). We compared different methodologies for collecting spectra, that is, benchtop instrument versus benchtop fiber-optic probe and field portable fiber-optic probe, and different wood surfaces (radial and transverse). Calibrations based on the benchtop instrument were superior to those obtained using the fiber-optic probe systems. Difficulty with adequately representing the sample when collecting spectra using a fiber-opt...
Rapid Prediction of Basic Wood Properties by Near Infrared Spectroscopy*
2006
The optimal utilisation of a wood raw material is dependent on the wood properties. In this study near infrared (NIR) spectroscopy was used to nondestructively predict density, modulus of elasticity, and modulus of rupture for small clear specimens cut from Picea abies (L.) Karst. (Norway spruce) trees. NIR spectra were recorded directly on the wood surface of each specimen as close as possible to the fracture developed during the bending test. Models were calibrated using partial least squares regression. The validation method was test set validation by data splitting. The correlation between predicted and measured values was highest for modulus of elasticity (0.86), followed by modulus of rupture (0.84) and density (0.79). The validation of the models showed that the average accuracies of predictions were 20.3 kg/m3 for density, 1.1 GPa for modulus of elasticity, and 6.1 MPa for modulus of rupture. Results are comparable to what has been found for other tree species, such as Pinus...
Carbohydrate Polymers, 2010
Fourier transform infrared (FTIR) spectroscopy, in combination with multivariate analysis, enable the analysis of wood samples without time-consuming sample preparation. The aim of our work was to analysis the wood samples qualitatively and quantitatively by FTIR spectroscopy. A Van Soest method to determine the lignin, cellulose and hemicellulose content, was used as reference method. Multivariate calibration was performed based on first derivative of the FTIR spectra in the wave number range from 1900 to 800 cm −1 , using principal component analysis (PCA), hierarchical cluster analysis (HCA) and partial least-squares (PLS) chemometric methods. Multivariate calibration models for FTIR spectroscopy have been developed. Using PCA and HCA approach, wood samples were classified as softwoods and hardwoods while wood samples with and without treatments were labeled as wood, neutral detergent solution fiber (NDSF), acid detergent solution fiber (ADSF) and strong acid solution fiber (SASF). Furthermore, PLS regression method was applied to correlate lignin, cellulose and hemicellulose contents in wood samples with the FTIR spectral data. The models' refinement procedure and validation was performed by cross-validation. Although a wide range of input parameters (i.e., various wood species) was used, highly satisfactory results were obtained with the root-mean-square errors for the contents of lignin, cellulose and hemicellulose are 1.51, 0.96 and 0.62%, respectively. This study showed that FTIR spectra have the potential to be an important source of information for a quick evaluation of the chemical composition of wood samples.