Designed combination of chiral selectors for adjustment of enantioseparation selectivity in capillary electrophoresis (original) (raw)
Related papers
Choice of chiral selector for enantioseparation by capillary electrophoresis
Trends in Analytical Chemistry, 2003
Capillary electrophoresis (CE) is an effective tool for the resolution of enantiomers, which is accomplished by supplying the background electrolyte with a chiral selector capable of discriminating between the enantiomers concerned. A large number of chiral selectors are currently available, especially prominent among which are cyclodextrins (CDs), chiral crown ethers, chiral surfactants, ligand-exchange complexes and linear polysaccharides. The most suitable chiral selector for each specific purpose is usually selected by trial and error, which is expensive and time-consuming. This article reviews the separation capabilities of chiral selectors and provides criteria for their choice in terms of molecular size, charge, and the presence of specific functional groups or substructures in the analytes with a view to minimizing the number of trials needed. Such criteria are summarized in tabular form and their application illustrated with selected examples. #
Use of organic modifiers to enhance chiral selectivity in capillary electrophoresis
Amino Acids, 1995
Using capillary electrophoresis, the enantiomers of a number of dansyl amino acids were resolved using native fi-cyclodextrin. The neutral chiral host resolved analytes possessing a negative charge at pH 9, the conditions employed in this study. Organic modifiers added to the running buffer were particularly adept at enhancing chiral recognition between the guest and host molecule in capillary electrophoresis. This work examined the effects of methanol, dimethylformamide, and acetonitrile on the resolution, migration time, and efficiency of twelve dansyl amino acids. Examples are given of the separation of racemic dansyl amino acids utilizing this technique and conditions necessary to achieve enantioselectivity.
Enantiomer migration order in chiral capillary electrophoresis
ELECTROPHORESIS, 2002
Enantiomer migration order in chiral capillary electrophoresis Enantiomer migration order (EMO) in chiral capillary electrophoresis (CE) represents a challenging issue, referred to in less than 20% of the articles on CE enantioseparations. This review articie will (i) illustrate the actuality of the topic, (ii) discuss some technical problems related to EMO in CE enantioseparations, (iii) examine the principal differences between CE and other separation techniques from the viewpoint of enantiomer elution order, (iv) demonstrate the potential for a designed reversal of EMO in CE, and (v) emphasize the importance of studying EMO for better understanding of chiral CE as well as its more effective application. Along with CE, the results obtained by other instrumental techniques such as nuclear magnetic resonance (NMR) spectroscopy, mass spectrometry (MS), X-ray crystallography, as well as molecular modeling calculations will be shortly discussed. Rather than referring to all published examples of the opposite migration order of enantiomers in CE, the emphasis will be on general aspects. Recently, the reversal of the EMO was described in detail in a book chapter (Chankvetadze, B., Capillary Electrophoresis in Chiral Analysis, Wiley & Sons, Chichester, UK 1997, Chapter 12) as well as in three review articles [1, 3, 4].
Croatica Chemica Acta, 2011
In recent years enantioseparation of both active pharmaceutical ingredients and bio molecules such as amino acids became more and more necessary because in most cases the two stereo forms exhibit different pharmacological effects. This article deals with the chiral separation of dansylated amino acids by ligand-exchange capillary electrophoresis using L-phenylalaninamide, L-lysine and L-threonine as chiral selectors. Experiments with different central metal ions such as Cu(II), Co(II), Cd(II), Ni(II) and Zn(II) were carried out. Optimal conditions were found out by studying the effect of the pH and the selector molarity on the chiral resolution. Best separation was obtained for the Cu(II)/L-lysine complex, showing a chiral resolution up to 17 for Dns-DL-Met.
Journal of Chromatography A, 2002
A capillary electrophoretic (CE) method for the enantioseparation of N-protected chiral amino acids was developed using quinine and tert-butyl carbamoylated quinine as chiral selectors added to nonaqueous electrolyte solutions (NACE). A series of various N-derivatized amino acids were tested as chiral selectands, and in order to optimize the CE enantioseparation of these compounds, different parameters were investigated: the nature of the organic solvent, the combination of different solvents, the nature and the concentration of the background electrolyte, the selector concentration, the capillary temperature, and the applied voltage. The influence of these factors on the separation of the analyte enantiomers and the electroosmotic flow was studied. Generally, with tert-butyl carbamoylated quinine as chiral selector, better enantioseparations were achieved than with unmodified quinine. Optimum experimental conditions were found with a buffer made of 12.5 mM ammonia, 100 mM octanoic acid, and 10 mM tert-butyl carbamoylated quinine in an ethanol-methanol mixture (60:40 v/v). Under these conditions, DNB-Leu enantiomers could be separated with a selectivity factor (␣) of 1.572 and a resolution (Rs) of 64.3; a plate number (N) of 127,000 and an asymmetry factor (As) of 0.93 were obtained for the first migrating enantiomer. Chirality 11: 622-630, 1999.
ELECTROPHORESIS, 2002
The separation of racemic derivatized amino acids (N-acetyl) into their enantiomers was achieved using capillary zone electrophoresis employing vancomycin as a chiral selector. Due to the strong absorption properties of the chiral selector at the low wavelengths used, the partial-filling countercurrent method was adopted in order to improve method sensitivity. In the separation system studied, the chiral selector filled only a part of the capillary and, due to the appropriate selection of the pH, was moving in the opposite direction of the analytes keeping the detector free from absorbing compounds. The effect of several experimental parameters on the enantioresolution of analytes was studied, e.g., vancomycin concentration (0-5 mM), pH of the background electrolyte (pH 4-7), capillary temperature (15-357C), and the presence of an organic modifier in the run buffer (methanol or ethanol or n-propanol). N-Acetyl glutamic acid, serine, cystine, tyrosine, and proline were all baseline-resolved into their enantiomers and the enantioresolution factor (R s ) was increased by raising the vancomycin concentration. pH 4 allowed the baseline resolution of the five studied analytes in the presence of 2.5 mM of chiral selector and an increase in pH caused a decrease of R s .
Electrophoresis, 2004
Effects of partial/asymmetrical filling of micelles and chiral selectors on capillary electrophoresis enantiomeric separation: Generation of a gradient The effect of several experimental parameters on enantiomeric separations in micellar capillary electrophoresis (MCE) was studied. A model separation system was tested. It was composed of an acidic phosphate buffer with sodium dodecyl sulfate (SDS) and hydroxypropyl-b-cyclodextrin (HP-b-CD) as the chiral selector. A substituted angelicin was used as a chiral analyte. Changes in the concentration of SDS micelles/SDS monomers in the presence of HP-b-CD and their impact on the enantioselective separation were investigated. Variation of the composition of electrolytes in the individual compartments of the separation system (inlet vial, capillary, and outlet vial) affected both the migration times and the resolution of the enantiomers. Current vs. time dependencies also were monitored during the separations. A mathematical model of electromigration in micellar systems with chiral selector present was proposed and a computer simulation was used to explain the observed phenomena and to confirm the generation of a CD/SDS-micelle concentration gradient under certain experimental conditions. This is the reported first attempt of a computer simulation of the complex, dynamic chiral environment of the CD-SDS-MCE system.
Chirality, 1999
A capillary electrophoretic (CE) method for the enantioseparation of N-protected chiral amino acids was developed using quinine and tert-butyl carbamoylated quinine as chiral selectors added to nonaqueous electrolyte solutions (NACE). A series of various N-derivatized amino acids were tested as chiral selectands, and in order to optimize the CE enantioseparation of these compounds, different parameters were investigated: the nature of the organic solvent, the combination of different solvents, the nature and the concentration of the background electrolyte, the selector concentration, the capillary temperature, and the applied voltage. The influence of these factors on the separation of the analyte enantiomers and the electroosmotic flow was studied. Generally, with tert-butyl carbamoylated quinine as chiral selector, better enantioseparations were achieved than with unmodified quinine. Optimum experimental conditions were found with a buffer made of 12.5 mM ammonia, 100 mM octanoic acid, and 10 mM tert-butyl carbamoylated quinine in an ethanol-methanol mixture (60:40 v/v). Under these conditions, DNB-Leu enantiomers could be separated with a selectivity factor (␣) of 1.572 and a resolution (Rs) of 64.3; a plate number (N) of 127,000 and an asymmetry factor (As) of 0.93 were obtained for the first migrating enantiomer. Chirality 11: 622-630, 1999.